Notice of Participation in the "NEW Environment Exhibition" (Teijin Frontier) from May 28 (Wednesday) to May 30 (Friday), 2025.

Achieving high flow rate, low pressure loss, high precision, and long lifespan with filter media featuring fine and uniform pore sizes.

The "Nano Front® Filter Cartridge" uses ultra-fine nanofibers as the filtering material. The fibers are fixed together by thermal bonding, without the use of adhesives or other foreign materials. With an extremely thin and uniformly fine pore size filtering material, it simultaneously achieves high flow rates, low pressure loss, high precision, and long lifespan. It streamlines various liquid filtration processes and contributes to increased productivity. The filter material can also be selected according to the filtration target. It is adopted in various fields. 【Product Lineup and Applications】 ■ TNP Type (Made of Polypropylene) For strong acids, strong alkalis, solvents, chemicals, lubricants, general industrial water, etc. ■ TNN Type (Made of Nylon) For alkaline solutions, various organic and polar solvents, binders, various resins, etc. ■ TNE Type (Made of Polyester) For acidic solutions, pre-filters for pure water systems, general industrial water, brewing water, machine cutting fluids, etc. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other filters
• Filtration Equipment

By introducing special fibers into concentrated sludge, the water conduction effect of the fibers improves the dewatering efficiency of the dewatering machine, thereby reducing the cost of dewatered sludge treatment and the amount of industrial waste.

Reduce moisture content and decrease sludge discharge volume. Reduce heavy oil usage during sludge incineration and lower CO2 emissions. 【Features】 ■ The capillary phenomenon effect and water guiding effect of the fibers discharge moisture from the sludge to the outside. ■ Exceptional dispersion of sludge due to the special processing of the fibers. ■ Brand proposals tailored to each dewatering machine mechanism are possible. ■ Improvement of sludge dewatering efficiency with a small amount (against TSI-4%). ★ We will be exhibiting at the "15th Cosmetics Development Expo Tokyo" starting on January 15. 15th Cosmetics Development Expo Tokyo / COSME Tech 2025 TOKYO Dates: January 15 (Wed) - 17 (Fri), 2025 Venue: Tokyo Big Sight Booth Number: C11-38 *For more details, please refer to the PDF document or feel free to contact us.

• Other filters

Water treatment technology for reducing excess sludge using special fiber carriers! Compatible with various shapes of reaction layers.

This technology is a water treatment method that serves as an alternative to the oxidation ditch method (OD method) through the use of "special fiber carriers" and "multi-layered reaction zones." By utilizing the existing civil structures of the OD method and significantly reducing the amount of excess sludge generated, it allows for the downsizing of sludge treatment facilities and equipment, thereby reducing lifecycle costs. The "special fiber carrier unit" can be manufactured to fit the dimensions of the water tank and can accommodate various shapes of reaction tanks. [Features] ■ Effective use of existing civil structures of the OD method ■ Significantly reduces excess sludge generation compared to the OD method *For more details, please download the PDF or feel free to contact us.

• Water treatment equipment

Verification of facilities in disaster response and population decline response! We examined the ease of construction and other factors.

We would like to introduce the demonstration of practical wastewater treatment technology capable of emergency recovery response during disasters, conducted at the Tahara Purification Center. We carried out a demonstration of technology that can quickly and safely restore urban sewage treatment functions during disasters, as well as a provisional facility that responds to future wastewater volumes in depopulated areas. The rapidity of construction and startup processing aimed for a period of less than 4 months from the start of assembly to achieving the target water quality, and the result was verified at 3.3 months. 【Verification Items】 ■ Ease of construction ■ Rapidness of construction and startup processing ■ Stability of effluent water quality ■ Life cycle cost ■ Ease of dismantling and removal *For more details, please download the PDF or feel free to contact us.

• Water treatment equipment

Rapidly decomposes to a molecular weight at which biodegradability manifests in the presence of water! Control over the practical period is also possible.

We would like to introduce our "Marine Biodegradable PLA Sheet." It was developed to address the issues of plastic residue in soil environments and microplastic problems in the ocean. By adding a "trigger substance" to PLA, it rapidly decomposes to a molecular weight at which biodegradability is expressed in the presence of water. 【Features】 ■ Enhanced biodegradability (control over practical usage period is also possible) ■ Plant-based raw materials *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

I want to achieve energy conservation, cost reduction, and CO2 reduction in the factory. The answer is the "optimization of airflow" in the dust collector.

The unnecessary excess airflow of the dust collector can be automatically optimized for airflow, achieving energy savings through the introduction of inverter control.

• inverter
• Bag Filter

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube