Notice of Participation in Japan IT Week Spring Exhibition - IoT and Edge Computing EXPO

Modbus/TCP ⇔ Modbus RTU/ASCII Converter

"Comm Assist-Mod" is a protocol converter that connects RS-232C devices or RS-485 devices to Ethernet. It allows you to select the communication method from multiple communication modes according to the connected devices. In Modbus/TCP mode, by connecting RS-485 devices that support Modbus RTU/ASCII transmission methods, it sends (requests) Modbus/TCP data from a PC or PLC on Ethernet to RS-485 Modbus RTU/ASCII devices as Modbus RTU/ASCII data, and conversely, it sends (responds) Modbus RTU/ASCII data from RS-485 Modbus RTU/ASCII devices to a PC or PLC on Ethernet as Modbus/TCP data. Additionally, it has RS-232C/Ethernet converter and RS-485/Ethernet converter functions.

• Other security and surveillance systems
• Demand Monitoring
• Other network tools

Power consumption data can be obtained via the "B route" information communication method using Wi-SUN communication equipped in low-voltage smart electric meters.

"ECOGate-WS" is a controller for low-voltage smart electric power meters. It has the capability to acquire electric power data via the "B route" communication method using Wi-SUN communication equipped in low-voltage smart electric power meters. It has a Modbus-TCP server function, allowing the acquired various electric power data to be retrieved using the Modbus-TCP protocol.

• Power Monitoring Equipment
• Demand Monitoring
• Other energy equipment

Make the "maintenance management" and "visualization" of equipment and machinery easier and more convenient.

"Facility Assist" is a facility monitoring system that packages the necessary functions for the stable operation and visualization of equipment and machinery, and is compatible with the cloud. In addition to the ease of system construction provided by cloud technology, using the packaged applications allows for simplified remote maintenance, addressing personnel shortages, early prediction of failures, and reduced recovery time, among many other benefits. We also offer customization based on customer requests, providing suitable proposals each time. ■ Supported Products ⇒ IOG-100, LM-100, L2X Assist *For detailed equipment configuration diagrams, please download the PDF materials.

• Other security and surveillance systems
• Remote Control
• Power Monitoring Equipment

O&M of the equipment is carried out through remote monitoring and remote control using a cloud-based center.

By collecting the operational status data of equipment monitored at each site using dedicated data collection devices for sensors, measuring instruments, and contact monitoring devices, and converting it on the cloud into user-friendly communication protocols and data formats, it becomes easier to create application software tailored to the needs of each user.

• Other security and surveillance systems
• Remote Control
• Other process controls

Acquisition of power consumption data using the IPv6-based "B route" communication method equipped in high-pressure smart meters.

The "LXG-600" is an EMS controller for high-voltage smart meters. It has the capability to acquire power consumption data using the IPv6-based "B route" information communication method equipped in high-voltage smart meters. It converts the acquired data in ECHONET Lite format to the cloud server's receiving protocol/data format and has the functionality to regularly transmit this data via the LTE wireless communication carrier network. The transmission method to the cloud server can also be customized according to the customer's needs. Main Features: ■ EMS controller compatible with high-voltage smart power meters (B route) ■ Compliant with ECHONET Lite standard and ECHONET Lite AIF standard ■ Data transmission of various measurement values from high-voltage smart power meters via LTE

• Data Logger
• Demand Monitoring
• Other energy equipment

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 31st Measurement and Measurement Exhibition INTERMEASURE 2024 Official Website: https://intermeasure.org/itms2024/ 【 Dates 】 From __ (Wednesday) to __ (Friday), 202_ 【 Venue 】 Tokyo Big Sight (Tokyo International Conference Center) East Hall (Booth Number: ___) 【 Exhibited Products 】 - Air Leak Tester - Hydrogen Leak Detector - Pin Hole (Reference Test Piece) and more. For more details, please refer to the "Related Materials" (PDF file) below.

In connectors that connect various hardware such as automobiles, industrial equipment, and communication devices, low-cost Sn-plated products are widely used. However, there are also cases where attention is needed regarding the reliability specific to Sn-plated contacts. In this webinar, based on actual connector failure cases that have occurred in the market, we will explain the process leading to the identification of causes for typical failure modes such as: - Whiskers (short circuit failures) - Fretting wear (contact failures) Furthermore, we will systematically introduce the organization of failures through the FTA (Fault Tree Analysis) of the entire connector, as well as each failure mechanism. ■ Technical content to be explained: - FTA structure of connector failures - Mechanism of whisker formation and evaluation methods - Mechanism of fretting wear and evaluation methods ■ Introduction of future evaluation technologies: - High-temperature and high-humidity fretting wear testing (scheduled for introduction in December 2026)

Understanding TLM Overview It has become increasingly clear that traditional RTL modeling techniques alone are insufficient for the design and verification of large-scale ASICs/SoCs and FPGAs. As a result, the concept of Transaction Level Modeling (TLM) has been widely adopted, and it has become essential in verification methodologies such as UVM. In this webinar, we will introduce TLM using terminology explanations and implementation examples with simple sample designs.

DO-254 specifies a rigorous and requirements-based process for FPGA design development that emphasizes safety, reliability, and compliance with regulations. This process includes key steps such as defining verifiable requirements, developing design elements with ensured traceability, creating high-quality RTL code, and conducting comprehensive verification. Each phase is essential for preventing hardware failures and achieving robust designs. In this webinar, we will introduce the processes necessary to achieve compliance with DO-254 in aircraft-mounted FPGA design. Additionally, we will also present tools and methods for optimizing the design and verification workflow.

＼Utilizing HPLC Analysis and Separation for More Efficient Synthetic Research／ We will hold a webinar where you can attend the content that was well-received at the seminar held in July. ▶Reduction of analysis time ▶Efficiency in impurity analysis ▶Expansion of HPLC/LC-MS utilization ▶Introduction of automation and the latest workflows In a special lecture, Dr. Kanako Kumada from the Catalysis Chemistry Research Division of the National Institute of Advanced Industrial Science and Technology will present on "Autonomization of Organic Synthesis Experiments - Aiming for Transformation of Research Processes." 【Event Overview】 ▶Date: Thursday, August 20, 2026 ▶Time: 15:00 - 16:45 (Streaming starts at 14:45) ▶Venue: Online ▶Participation Fee: Free We look forward to the participation of everyone considering improvements in analytical efficiency in synthetic research and the expansion of HPLC and LC/MS utilization.