Added a 1450nm bandpass filter to the artisan infrared.

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only transmit specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can you create a film for that? - Since light other than the desired wavelength will cause noise, I would like to widen the stop band. - Given the range of incident angles, can this be taken into account? - Is it possible to mount this on AGVs or OHTs? The 905nm bandpass filter is a filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our proven results in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (such as TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Distance measuring device
• Image Processing Equipment
• Sensors

Standard stock items include anti-reflective films, bandpass filters (BPF filters), and infrared cut filters (IR cut filters), among others.

We will start selling some optical thin film products (optical filter products) and patterned processing products as "standard stock items." We have responded to such requests! ◆ It's difficult to bear the cost of a whole batch when only a few pieces are needed for experiments... ◆ I want to see product development and performance tests quickly, so I need a few pieces at different levels... ◆ I just want to try it out for now... We often hear such voices through inquiries from our website. Even if custom-made filters are ultimately needed, I believe it is very difficult to define complete filter performance from the beginning.

• mirror
• Distance measuring device
• Sensors

It is a filter designed to transmit light in two specific wavelength bands while blocking (preventing) other wavelength bands. It is ideal for surveillance cameras and similar applications.

1) Are you facing issues like this? ■ I want to pass visible light and part of the infrared wavelength (850nm), is that possible? ■ I definitely want to cut out the blocking range that causes noise. ■ Since there is a range of incident angles, can that be taken into account? ■ The shape is special, but can it be shipped as a part? 2) Dual-band pass filter (multi-band pass filter) This is a filter designed to transmit light in two specific wavelength bands while blocking (stopping) other wavelength bands. In addition to regular IR cut, it has the function to selectively transmit only specific near-infrared wavelengths (such as 850nm, 905nm, 940nm, 1064nm). For example, it is ideal for applications that require monitoring during both day and night by transmitting specific visible light and specific near-infrared light. With 40 years of experience, we have achieved sharp wavelength separation and high transmission rates. Our unique control technology during film formation allows for high durability and reduced shift.

• Other optical parts
• Surveillance Cameras
• Sensors

Over 500 successful projects and a rich lineup of film deposition processing. With 100 years of experience since our founding, we contribute to our customers' technological innovations through optical thin films and precision processing technologies.

Adachi New Industries does not simply perform film deposition. We aim to be a company that can provide comprehensive proposals, from thin film design to deposition processes and product shape processing, according to our customers' specifications. Do you have any of the following concerns? - Is it possible to change characteristics based on the performance of the light source or photodetector? - If characteristics change with angle, can simulations be performed? - I would like to see product characteristics with a small batch prototype first. - After starting mass production, can you provide efficient proposals? - Can you measure filters with unknown optical characteristics? 【Features】 ■ High transmittance and reflectance ■ Product stability ■ Film deposition on various substrates ■ Comprehensive coverage as a product ■ Small batch prototype support available (single item support possible) * For more details, please refer to the catalog or feel free to contact us.

• Other optical parts
• Sensors
• LED lighting

It is a dielectric multilayer film filter that transmits visible light and reflects near-infrared light.

It is used as a near-infrared cut filter that adversely affects CCD devices such as video cameras. The optical characteristics, such as the wavelength position with a transmittance of 50%, transmittance, and cut wavelength band, can be set arbitrarily. (Are you facing such challenges?) Is it possible to cut only the wavelength of near-infrared light? I want to allow visible light to pass while blocking IR wavelengths. I want to suppress light that causes noise and increase the sensitivity of the sensor. Can the wavelength range I want to transmit be custom adjusted? Is it possible to process it to chip size?

• Other optical parts
• Color camera
• Sensors

This is an infrared wavelength filter optimized for optics, with plasma control technology enhanced to its limits.

Infrared materials are incredibly fragile! (Weak against scratches, weak against water, weak against chemicals) This common knowledge can be overturned with our company's technology. 1) Excellent infrared transmission properties This is a filter that transmits infrared light through the formation of a multilayer film, utilizing interference effects to achieve excellent transmission rates from near-infrared to far-infrared regions. 2) Design and customization available for desired wavelength ranges We can design and deposit films tailored to the wavelength ranges requested by our customers. Please inform us of the substrate type and wavelength range when making inquiries, as we will design according to the characteristics of the substrate. 3) Measurement equipment: FT-IR available Rest assured that we will always include a measurement chart (spectral characteristics) upon shipment. 4) Component support available We can not only handle substrate procurement and film deposition but also cut to any desired shape and ship as components. However, we will need detailed drawings. 5) Cleanroom compliance Our work environment maintains the necessary cleanliness levels from film deposition to inspection, ensuring a cleanroom operation. We have a robust system in place to address minute film defects (such as foreign particles in the film).

• Plastic processing machines (cutting and rolling)
• Transport and handling robots
• Surveillance Cameras

Realizing Precision Control in Energy Innovation Hydrogen, fuel cells, CCUS, biofuels, CNT manufacturing. There are technologies on-site that monitor precise flows to support the energy of the future. Brooks Instrument's flow meters support the energy transition.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

We are pleased to announce that our company will be exhibiting at the "Monozukuri Fair 2025" held in Fukuoka. ECAD is a dedicated CAD solution for electrical design, equipped with a wealth of features for control design and power distribution panel design, developed for domestic electrical designers over the past 40 years. It addresses challenges such as improving design quality, enhancing operational efficiency, and reducing labor. At the venue, we will introduce the "Panel Manufacturing Skill-less Solution," which utilizes the panel manufacturing support system "WIRE CAM DX" to create pre-manufacturing information as a solution to the labor shortage issues in panel manufacturing that have traditionally required skilled workers. This enables less experienced operators to achieve high-quality manufacturing in processes such as wire processing, component assembly, and wiring work. We invite you to visit our exhibition booth. ■ Exhibition Name: Monozukuri Fair 2025 ■ Location: Marine Messe Fukuoka Hall A & B ■ Booth Number: Hall B BN-9 ■ Dates: October 15 (Thursday) to October 17 (Saturday), 2025 (3 days) ■ Hours: 10:00 AM to 5:00 PM (last day until 4:00 PM) *For more information about the exhibited products, please download the materials. Feel free to contact us with any inquiries.

Features ● PICO-ITX standard ● Equipped with Intel Core Ultra 7 255U / Ultra 5 225U ● 16/32GB onboard memory ● 2.5GbE + 1GbE ● HDMI 1.4 + eDP 1.4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA) ● M.2 2230 E-Key x 1 (PCIe 4.0 [x1] + USB 2.0) ● USB 3.2 Gen 2 x 2 + USB 2.0 x 2 ● RS-232/422/485 x 2 ● TPM, GPIO 4-bit, SATA 6Gb/s x 1 ● SMBus/I2C (Default: SMBus) ● Intel AMT Support * This model does not include storage or OS.

Features: ● PICO-ITX standard ● Equipped with Intel Atom x7433RE/x7835RE ● DDR5 4800MHz×1 (up to 16GB) (sold separately) ● HDMI 1.4×1, eDP 1.4b/LVDS×1 ● 2.5GbE×1, GbE×1 ● Full-Size mSATA, M.2 2230 E-key x1 ● USB 3.2 Gen2[x1]×2, USB 2.0×4 ● RS-232/422/485×2, RS-232×2 ● TPM 2.0, SATA 6.0Gbps×1, GPIO 4-bit, SMBUS/I2C×1 * This is a model without an operating system.