2025 Kyoto-Shiga Machine & Tool Solution Fair

Significant improvements in productivity through machining with an electromagnetic magnetic chuck that allows for simultaneous processing of multiple items and reduction of setup time! A collection of case studies is being offered!

The Magnet Vice [Mag Vice for Cutting with Permanent Electromagnetic Chuck] is a magnet chuck of the permanent electromagnetic type made from permanent magnets, specifically neodymium and alnico magnets. It utilizes the characteristics of alnico magnets to control the ON/OFF function with electrical power, resulting in a super-strong permanent magnet chuck. It has a proven track record in various cutting processes, including five-sided machining, simultaneous machining of multiple parts, cutting of large workpieces using gantry-type machining centers, removal of scale from workpieces, die-sinking machining, groove cutting of round steel, and mold machining! A collection of case studies is also available! 【Features】 ■ A magnetic force of 1000 kgf per four magnetic poles due to powerful neodymium and alnico magnets. ■ The strength of the magnetic force can be adjusted in eight levels using a controller. ■ No power supply is needed after excitation. It can maintain magnetic force for long periods without affecting precision. ■ The workpiece is held on one side due to magnetic attraction, making it suitable for five-sided machining. ■ Machining is completed in one operation, improving precision retention and machining efficiency. *For more details, please refer to the PDF document or feel free to contact us. We can also bring a demo unit for testing at your location.

• Grinding Machine

Significant improvement in productivity through machining with permanent magnet clamping blocks that allow simultaneous processing of five sides and reduction of setup time!

A permanent magnet clamping block is a powerful permanent magnet type magnetic chuck that can be used for cutting processes. 【Features】 ■ A cutting magnetic chuck that uses very strong neodymium magnets. ■ Easy ON/OFF control of magnetic force with lever operation. ■ The main body can be connected, allowing for handling of large workpieces. ■ By operating the magnetic force switching lever at the front of the connected body, you can control the ON/OFF of all connected magnetic forces. ■ Once the magnetic flux is fully engaged with the workpiece, the magnetic flux does not appear on the surface of the workpiece, preventing chips from being attracted to the surface due to magnetic force. ■ By using an induction block (magnetic flux conductor), it can accommodate various shapes of workpieces. ■ Using a distortion removal block, it is also possible to remove the scale from distorted workpieces. *For more details, please refer to the PDF document or feel free to contact us. We can also bring a demo unit to your location for test machining.

• Grinding Machine

We will provide a collection of successful cases of improved productivity for free! With Mag Vise, it is possible to shorten setup time and process multiple items simultaneously.

Amid rising various costs, there is a strong demand for reducing production costs. MagVice instantly clamps workpieces using magnetic force generated by lever operation or electricity. This significantly shortens the setup time, which is often time-consuming. Additionally, compared to traditional vises, it can clamp more workpieces, greatly improving processing efficiency and shortening delivery times. When hearing about clamping with magnets, there may be concerns about workpieces moving or chips adhering to the workpiece and interfering with cutting tools. However, if used correctly, there is absolutely no need for such worries. First, we have compiled a collection of processing examples as a MagVice processing case study. We would appreciate it if you could take a look. There is a link on this page for easy downloading. We also have various demo units available. We can bring them to customers for actual processing tests, free of charge. However, please prepare the machine and workpieces. Our sales team will carefully explain the properties of magnets and how to use them to process workpieces more efficiently and effectively.

• Chuck

Adopting a unique 1.5° swing on one side of the mouthpiece significantly enhances grip strength.

The "Fast Grip Self-Centering Vice" is a practical product that can be used for a wide range of applications, including 3-axis vertical, 4-axis horizontal, and 5-axis machining centers. Simple and smart. It is fundamentally composed of eight parts, with the design of each individual component simplified, and the basic shape determined by its function. The jaws can be easily exchanged with minimal lift-off. Additionally, the swing-type jaws have improved gripping power. Center fine adjustment is possible after spindle replacement. 【Features】 ■ The jaws can be easily flipped 180 degrees for quick expansion of the clamping range. ■ The jaws adopt a 1.5° swing on one side, significantly enhancing gripping power. ■ A special angle locking mechanism prevents workpieces from lifting. ■ Unique fine adjustment center mechanism allows for easy center adjustment. ■ Repeatability: 0.005mm *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

Successful new approach to make the zero-point system easier, faster, and more effective!

We would like to introduce the Zero Point Plate 96/52 'EQS9652' that we handle. It significantly reduces costs, enhances application flexibility, and improves safety in clamping. The Zero Point System is compatible with the same systems from LANG and HWR. The size is 192×156×30mm, and it weighs 5.5kg. The socket is of a reversible type, allowing for easy orientation changes. 【Fast Point Zero Point System】 ■ Reduces setup time and allows for safe replacement ■ High-precision exchange and positioning can be done in a short time ■ Work can be performed with the same precision by anyone ■ Supports a variety of applications by exchanging modules ■ Mechanical type operated by screw tightening *For more details, please download the PDF or feel free to contact us.

• Other work tools

X thinning grinder for diameters from 3mm to 20mm. Anyone can easily grind up to the second relief. Can also grind carbide drills by replacing with SDC wheels.

The Fast Tech Drill Sharpener is a revolutionary drill sharpening machine that allows anyone, from beginners to veterans, to sharpen drills ranging from 3mm to 20mm to a two-flute relief angle with a split point (X-shining) in the same way. By holding the drill in a collet holder and positioning it, you only need to insert it into the sharpening unit, and it will sharpen to the two-flute relief angle and split point (X-shining). The unique patented technology with a built-in bearing holder prevents collet wear, so there is no worry about drill misalignment. You can also adjust the chisel width by adjusting the second sharpening unit. It easily revives broken drills and those that have lost their cutting edge, contributing to cost reduction and efficiency within the company. A CBN wheel for HSS drills is included as standard, but if you use the optional SDC wheel, it is also possible to sharpen carbide drills. Note: Drills that are broken and have no groove left, or those that are too short to be held by the collet, cannot be sharpened. [For more details, please download the catalog or feel free to contact us.]

• drill

X grinding machine for diameters from 12 mm to 26 mm. Anyone can easily grind up to the second escape. With additional collets, it can grind from a minimum of 8 mm to a maximum of 32 mm.

The FastTech X Shinning Drill Sharpener is a revolutionary drill sharpening machine that allows anyone, from beginners to veterans, to grind the tips of drills ranging from 12mm to 26mm to a 2-flute relief angle with a split point (X Shinning) in the same way. (By adding a collet, it can sharpen drills up to 7mm to 32mm.) By holding the drill in a collet-equipped holder and positioning it, you only need to insert it into the sharpening unit to grind the first and second relief angles and form the split point (X Shinning). As a result, it produces drills with excellent cutting performance. Additionally, the patented unique bearing-integrated holder prevents collet wear, so there is no concern about drill misalignment. The second sharpening unit can also be adjusted to modify the chisel width. It easily rejuvenates broken drills or drills that have lost their cutting edge, contributing to cost reduction within the company. A CBN wheel for HSS drills is included as standard, but by using the separately sold SDC wheel, carbide drills can also be sharpened. Note: Drills that are broken and have no flutes left, or drills that are too short to be held by the collet, cannot be sharpened.

• drill

Lightweight and compact yet super powerful! The safety factor is 3.5 times. Choose from ultra-compact to super large capable of lifting 3000kg, tailored to your applications and conditions!

The permanent magnet lifting magnet "ELM Series" features a unique yoke design that provides a powerful magnetic force with a safety factor of 3.5 times, while achieving overwhelming lightweight and compactness. Despite its small size, it has industry-leading magnetic strength. Additionally, it incorporates top-level safety measures in the industry, allowing for a 3-year warranty. The lever operation allows for easy ON/OFF control of the magnetic force, and the V-shaped contact surface accommodates both flat steel and round steel. We offer a range of types to choose from, from ultra-compact sizes that fit in the palm of your hand to super-large models capable of lifting up to 3000 kg, tailored to various applications and conditions. 【Features】 ■ Uses ultra-powerful neodymium permanent magnets ■ Lightweight for easy portability ■ The compact type can attract small workpieces with a width of 90 mm ■ Safety design where the lever becomes heavy when the magnetic force is not active ■ 3-year warranty from the manufacturer in Japan 【Note】 Due to the use of ultra-powerful neodymium magnets, it cannot be used on workpieces in environments exceeding 80 degrees Celsius. *For more details, please refer to the documentation. Feel free to contact us with any inquiries. We also conduct product safety training sessions. Please do not hesitate to reach out.

• lift

We will solve the issues related to the deterioration of defect rates caused by fine particles and the cleaning process in manufacturing sites. The fine particle visualization system developed by Shin Nippon Air Technologies, under the ViEST brand, combines an ultra-high-sensitivity camera and light source to visualize fine particles in clean rooms and equipment. It can capture their behavior in real-time while also quantifying particle information, making it a world-class visualization system. Currently, we are expanding the sale of systems and tools, as well as contract technical services utilizing them, both domestically and internationally. We have particularly rich experience in the semiconductor industry and clean rooms. Below are some examples of applications, but by using our technology, we can strongly promote solutions to various issues such as the deterioration of defect rates due to fine foreign substances, visualization of clean airflow, and concerns regarding site cleanliness. - Visualization investigation of fine particles and airflow in the manufacturing line and environmental improvement - Promotion of cleanliness in manufacturing equipment and environments - Cleanliness evaluation of various equipment performance - Improvement of yield and quality degradation caused by contamination issues - Support for research and development requiring visualization of fine particles and airflow - Evaluation of particle generation from products.

[Speaker] Ministry of Defense, Defense Planning Bureau, Defense Planning Division Director of Early Equipment Promotion Office, Mr. Toshiyuki Hinosawa [Key Lecture Content] As the security environment surrounding our country has become the most severe and complex since the post-war period, we are advancing efforts toward early equipment procurement in areas that are particularly urgent and important from a policy perspective, while also incorporating cutting-edge technology. In particular, unmanned assets were heavily utilized during Russia's invasion of Ukraine, drastically changing the nature of combat. In the future, I will discuss how the Ministry of Defense and the Self-Defense Forces will enhance these capabilities, including the multi-layered coastal defense system concept "SHIELD." [Lecture Items] 1. Concept and Overview of Early Equipment Procurement 2. Major Efforts Toward Early Equipment Procurement to Date 3. Strengthening Defense Capabilities of Unmanned Assets 4. Establishing a Multi-Layered Coastal Defense System "SHIELD" Using Unmanned Assets 5. Q&A / Business Card Exchange

We will be exhibiting at the "Converting Technology Comprehensive Exhibition 2026," which focuses on processing machines and equipment centered around converting technology. When you visit, please be sure to stop by our booth. We sincerely look forward to your visit. 【Our Booth Number】 2W-R33

[Instructor] Shunsuke Suzuki, President and CEO, Management Techniques Co., Ltd. [Key Lecture Content] The modern business environment is changing at an unpredictable pace, and to achieve success, new approaches that go beyond traditional thinking are essential. "Normal" thinking and "conventional" solutions cannot differentiate you in a highly competitive market. True breakthroughs arise from stepping outside the box. Therefore, the ability to "discover hidden problems and create innovative ideas that others cannot think of" becomes crucial. So, how can we develop such abilities and apply them in the business field? Successful business leaders, skilled engineers, and entrepreneurs who have achieved results do not rely solely on logic; they employ creative thinking. This can be broadly categorized into four areas: associative thinking, abstract thinking, multifaceted thinking, and conceptual thinking. In this seminar, we will learn four creative thinking approaches that will be immediately applicable in business settings. Through these, let’s master the way of thinking that will keep you one step ahead in the business world.

[Speaker] President and CEO of Leading Innovation Co., Ltd. Senior Consultant Yoshizawa Yosuke [Lecture Topics] 1. Common sense is creating a sense of stagnation in new product and new business development. 2. Reasons why "latent needs are infinite." 3. How to convert technology into functionality. 4. The importance and methods of converting functionality into value. 5. How to discover attractive themes from technology through a business structure map and generative AI. 6. Formulating competitive advantage strategies. 7. Q&A Session.