【FOOMA JAPAN 2025】 Exhibition Information

A compact catalytic deodorization device that can be moved with casters! Because it is catalytic, it is more high-performance than filter types and more energy-efficient than direct combustion types.

This is a "compact catalytic deodorization device" that removes VOCs (volatile organic compounds) such as toluene, xylene, and ethyl acetate, as well as exhaust gases containing unpleasant odors, by means of oxidative decomposition treatment. It has been designed to be lightweight and compact to enable local exhaust and temporary use, and it is a portable deodorization device that can be moved to the necessary location by adding casters. 【Features】 - Compact catalytic deodorization devices with treatment air volumes of 1Nm3/min, 3Nm3/min, and 5Nm3/min - Easy-to-understand operation display, with simple touch panel controls - Lightweight and easy to move due to the casters - Optional dedicated software allows for remote monitoring and operation using Wi-Fi with tablet devices or smartphones - Structure designed for easy maintenance *For more details, please download the PDF or feel free to contact us. *Demo units are available for use, and tests can be conducted with solvents brought in.

• Food environmental hygiene/contamination prevention equipment

Significant fuel savings possible! Odor control and safe exhaust treatment of VOC emissions.

The "catalytic deodorization device" is a system that oxidizes combustible substances, VOCs, and odors in exhaust gas by bringing them into contact with air through a catalyst, resulting in odorless and harmless emissions. Since it can initiate oxidation reactions at low temperatures (300°C to 350°C) below the ignition point, it consumes about one-third the fuel for preheating compared to direct combustion deodorization devices. Additionally, it is equipped with a built-in heat exchanger, and by adding a secondary heat exchanger, significant fuel savings can be achieved. 【Features】 ■ High deodorization efficiency with high-performance platinum-based catalysts ■ Low generation of nitrogen oxides, enabling low NOx operation ■ Negative pressure structure in the exhaust gas flow path within the device to prevent odor leaks ■ Compact integrated design with low flow resistance, reducing power consumption *For more details, please refer to the PDF document or feel free to contact us.

• Hazardous material processing

Space-saving type with easy operation! Achieve workplace environment improvement with a catalytic small deodorization device!

**[Problems Faced by Company A]** They were concerned about the deterioration of the workplace environment for employees caused by VOCs generated during the molding and coating drying processes of resin products. While combustion-type treatment devices are the most effective for VOC treatment, they struggled to find a device that met the condition of not threatening the 1.5m wide workspace between the dryers. Even when devices that could fit in the space were available, they often lacked sufficient processing capacity, leading to ongoing challenges. **[Implementation Effects]** The compact catalytic deodorization device, which is easy to operate with a touch panel, achieved a space-saving design of 120cm in width, 50cm in depth, and 70.5cm in height, while providing a processing capacity of over 3N?/min and a VOC removal efficiency of over 98%. After installation, the solvent odor that had been lingering in the workspace was reduced, creating a safer working environment. Employees have expressed high satisfaction, stating, "It has become easier to work" and "The solvent odor no longer clings to my clothes." ● For more details, please download the catalog or contact us.

• Other environmental equipment

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.