We will be exhibiting at Smart Sensing 2025 from June 18 to 20.

Compliant with UL standards for refrigeration and freezing equipment, as well as air conditioning units. Supports IP54, suitable for harsh conditions and outdoor applications.

The "SGD43S-M3-Sx" is a refrigerant detection sensor that has obtained UL certification as an RDS (Refrigerant Detection System) and is compatible with applications using A2L refrigerants. With an IP54 rating for dust and water resistance, it demonstrates stable performance even in outdoor or harsh environments. Based on a detection method utilizing thermal conductivity principles, it achieves fast response and long-term stability, while also offering maintenance-free operation with a lifespan of over 15 years, contributing to both safety and cost-effectiveness. 【Product Lineup】 ◎ For HVAC applications: "SGD43S-M3-S5" Supports monitoring of R-454B and R-32 through dual calibration, compliant with UL60355-2-40. ◎ For refrigeration and freezing applications: "SGD43S-M3-S7" Supports monitoring of R-454A, R-454C, and R-455A through triple calibration, compliant with UL60335-2-89. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.

• Other Sensors

CO2 sensor for indoor air quality applications with a form factor!

The "STCC4" is one of the world's smallest sensors designed for the direct measurement of CO2 gas concentration. It has greatly expanded the new possibilities for CO2 measurement applications that were previously limited by size and cost constraints. This sensor, designed to be seamlessly integrated into compact electronic devices, is a groundbreaking product in the CO2 sensor market. Additionally, this product utilizes a new technology for thermal conductivity sensing, providing the accuracy required for indoor air quality applications with low power consumption. 【Specifications (partial)】 ■ Designated CO2 measurement range: 400 - 5000ppm ■ Accuracy: ±100.0ppm ±10.0% m.v. ■ Supply voltage: 3.3V ■ Average supply current: 850uA ■ Maximum supply current: 5mA *For more details, please refer to the related links or feel free to contact us.

• Gas Detection Sensor

Suitable for applications that require compliance with IAQ standards such as RESET!

The "SEN65" is a sensing platform for measuring PM, RH/T, VOC, NOx, and CO2. By combining multiple sensors in a form factor, it can measure up to 9 environmental parameters (PM1, PM2.5, PM4, PM10, T, RH, VOC index, NOx index, CO2). Its innovative design allows for simplified integration, cost reduction, and customization. Additionally, the core of the SEN66 is the new compact MEMS-based particulate matter sensing element, the SPS6x. 【Specifications (partial)】 ■ Mass concentration range: 0 - 1000μg/m3 ■ Standard relative humidity accuracy: 4.5% RH ■ Specified CO2 measurement range: 0 - 40000ppm ■ Accuracy: ±50.0 ■ Sensor output: 0-500 VOC Index *For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment
• Other Sensors

High added value, high versatility, up to 40ml/min! Provides excellent chemical resistance and outstanding media compatibility.

The "SLF3S-1300F" is a liquid flow sensor that combines our long-standing excellent track record in low and minimum flow sensing with a thoroughly optimized mechanical design, elevating its already well-established functionality to a higher level in terms of price-to-performance ratio. This sensor provides the highest level of safety, stability, and long-term reliability across a wide range of fields, including diagnostics, analytical equipment, and life sciences. Based on our proven CMOSens Technology, we optimize costs by simplifying the design without compromising fluid, electrical, or mechanical connections. 【Specifications (partial)】 ■ Full-scale flow rate (H2O): 40ml/min ■ Accuracy (H2O): 5% ■ Repeatability (H2O): 0.5% ■ Full-scale flow rate (IPA): 40ml/min ■ Accuracy (IPA): 10% *For more details, please download the PDF or feel free to contact us.

• Flow Sensor

We offer multiple options regarding installation methods, electrical interfaces, and more! They can be customized according to your specifications.

The "SAAF Series" is a fog detection/automatic de-icing sensor that enhances visibility while reducing the energy required for defogging and de-icing the windshield, maximizing passenger comfort and safety. This product is fully calibrated, linearized, and temperature compensated, utilizing the thermal coupling of the windshield to communicate the timing for activating the de-icing mode to the HVAC controller. Please feel free to contact us when you need assistance. 【Features】 ■ Calibrated, linearized, and temperature compensated signals ■ Flexible installation with brackets or tape ■ High durability and reliability with automotive-grade connectors ■ Customer-specific solutions *For more details, please download the PDF or feel free to contact us.

• Sensors

We will be exhibiting at the J AGRI (J Agri) / Agricultural Materials EXPO held at Gran Messe Kumamoto from May 22 (Wednesday) to May 24 (Friday), 2024. 【Booth Number】: B1-43 Outdoor Exhibition Area Japan's largest comprehensive exhibition for agriculture and livestock, Agricultural WEEK, will be renamed J AGRI starting in 2024. This is a place where you can actually see, touch, and compare products. At our booth, we will showcase our lightweight resin flooring boards "JULIGHT / SUPER JULIGHT / RAKURAKUBAN" along with new products. Starting with the agricultural-specific flooring board "RAKURAKUBAN," which can be easily laid in various scenes such as around greenhouses, agricultural work sites, temporary parking lots, for the movement of agricultural machinery and light trucks, and for protecting truck beds, there are various ways to use the lightweight resin flooring boards "JULIGHT / SUPER JULIGHT series." We offer a variety of sizes and protrusion shapes tailored to customer needs, and they are lightweight enough to be carried by hand, with excellent impact resistance, as well as superior water resistance, weather resistance, and durability, providing outstanding features not found in plywood or steel plates. We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

We would like to inform you that we will be exhibiting our products at the 25th Annual Meeting of the Japanese Society for Protein Science. If you plan to attend, please feel free to stop by. ❚ 25th Annual Meeting of the Japanese Society for Protein Science Date: June 18 (Tuesday) - June 20 (Thursday), 2025 Venue: Acurie Himeji Exhibition Booth: For details, please visit the official website of the Japanese Society for Protein Science. URL: https://aeplan.jp/pssj2025/ ❚ Products to be Exhibited - Transporter Measurement Device | SURFE2R N1 This device allows for label-free and real-time direct measurement of transporter currents without using fluorescent probes or radiolabeled ligands. - Artificial Lipid Bilayer Experimental Device | Orbit mini This device simplifies the challenging tasks of forming lipid membranes, reconstructing membrane proteins, and measuring single-channel currents in experiments using artificial lipid bilayers, all with just a micropipette. - Liposome Preparation Device | Vesicle Prep Pro This single device enables easy preparation of liposomes without hassle, accommodating various lipid conditions (such as DPhPC, DPPC, DOPC, etc.).

We will be exhibiting at the "Kyushu Printing Information Industry Exhibition 2026" held at the Fukuoka International Center. During the event, we will showcase various products. We invite all related parties to come together and visit us. 【Suppliers】 ・Laser-X