From 27th in the preliminaries to a miraculous comeback victory. The DOBOT Ferrari races fiercely again this year!

Delicate operation of 0.5N, stable force control of ±3N!

DOBOT's latest robotic arm, the "CRAF series," is equipped with a 6-axis high-sensitivity force sensor, enabling delicate movements and precise control of force similar to that of a human hand. It allows for manual operation (dragging) with a force as low as 0.5 to 2N, making the teaching process remarkably smooth. In processes where stability of force is required, such as polishing and deburring, it enhances quality with high-precision force control of ±3N. Additionally, it features a highly sensitive safety function that can detect even slight collisions of 1N, making it safe for implementation in smart factories and research and development fields. This next-generation solution enables co-creation between humans and robots while reducing programming burdens.

• Articulated Robot

Reducing workload and evolving the workplace! A robotic system that paves the way for the future of heavy cargo transportation has arrived!

The innovative combination of "collaborative robots" and "balancer" achieves efficiency and space-saving in heavy material handling! This system aims to improve the working environment and enhance productivity by automating the handling of heavy workpieces. It is well-suited for manufacturing and logistics environments that want to improve work efficiency, especially in settings facing aging and labor shortages. 【Features】 ● Increased load capacity - The introduction of the balancer system makes it possible to transport heavy materials that were difficult with collaborative robots. - Capable of handling workpieces over 50kg, exceeding traditional limits. ● Space-saving design - No need for large robots, allowing effective use of the work area. - Easy installation and layout changes enable flexible operation. ● Flexible original design - Attachments designed to accommodate a variety of workpieces. - Safe handling without damaging the workpieces. ● Easy installation and mobility - Unit design with casters makes it easy to move to different work locations. ● Safe and efficient automation - Automates heavy material handling that traditionally required two people. - Significantly contributes to workforce reduction and alleviation of work burdens. *For more details, please refer to the PDF document or feel free to contact us.

• Articulated Robot
• Balancer

Fully compatible with water and dust! Achieve clean and safe automation with a fully washable collaborative robot that meets IP68 standards.

The DOBOT CRA-IP68 Series is a collaborative robot that complies with the IP68 standard for dust and water resistance. It can be used in environments with high levels of water and dust, and it is washable, allowing it to maintain a clean state at all times. It operates stably even in environments that require hygiene management, such as food processing, pharmaceuticals, chemical plants, and outdoor work, accelerating automation on-site. Features: - IP68 complete waterproof and dustproof: Strong against water and dust, stable operation in harsh environments - Washable: Supports running water and high-pressure cleaning, maintaining cleanliness at all times - High precision & durability: Stable operation with a repeatability of ±0.02mm - Intuitive operability: Easy programming, user-friendly even for beginners - Safety design: Equipped with collision detection and stop functions unique to collaborative robots - Versatile applications: Active in a wide range of fields including food, pharmaceuticals, chemicals, and outdoor work

• Articulated Robot

Adopts terminal dual aviation plug design! Allows direct connection of multiple advanced tools.

The "CR20A" is a collaborative robot designed by DOBOT for heavy-load applications. While inheriting the features of safety, efficiency, and ease of use from the CR series, it increases the payload capacity to 20kg, enabling various applications. This product has a working radius of 1,700mm and a payload capacity of 20kg. As a result, it meets the needs for picking, packaging, stacking heavy workpieces over 10kg, flexible processing of large parts, and welding of components in industries such as automotive, home appliances, and logistics. 【Features】 ■ Easy-to-use design for quicker installation ■ Large payload and long arm span for broader applications ■ Expanded 24-channel ports for high expandability ■ High protection level for safer collaboration *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots

Lightweight 6-axis collaborative robots of the DOBOT NOVA series that achieve productivity improvement and work efficiency enhancement.

The DOBOT NOVA series is a lightweight 6-axis collaborative robot that is ideal for automating commercial facilities and light tasks. It delivers maximum performance in minimal space and can be installed without changing the factory layout. It achieves ease of use through hand teaching and graphical programming, while enhancing safety with collision detection features. It provides innovative automation solutions across various industries, including retail stores and factories.

• Articulated Robot

In civil engineering sites, steel plates have traditionally been the standard, but in recent years, more companies are choosing wooden mats to suit site conditions. Hyper CLT mats, utilizing wood CLT as civil engineering materials, are being introduced for a wide range of applications including public works, temporary roads, access routes, material yards, and temporary parking lots. The reasons for their selection are not simply because they are "made of wood." The 5×10 panels weigh about 230 kg, making them lightweight and easy to install and remove even with small machinery, with a maximum capacity of 40 panels on a 10-ton truck. This also leads to improvements in workability and transportation efficiency. Furthermore, they add different values to the site compared to steel plates, such as reducing glare and radiant heat, noise control, CO2 fixation, and consideration for aesthetics. They can be partially used only where needed, allowing for differentiation in use from steel plates. This technology is registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS, with the registration number "TH-250021-A." The introduction of Hyper CLT mats is expanding as a new option that combines wood, NETIS, and civil engineering.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.