Walon opens a showroom at its Nagoya headquarters - Providing a space for problem-solving that aligns with space creation and product development.

Expressing the beauty of washi as it is. We are committed to considering environmental impact and working towards the realization of a circular society.

The "Acrylwaron Print Type Environmentally Friendly Product" is an environmentally conscious Japanese-style acrylic decorative resin board that enables the creation of a soft light space with a washi paper pattern. <Features> ■ Based on recycled acrylic boards that reduce CO2 emissions during manufacturing by over 70%. ■ Contains over 70% recycled materials, certified as an Eco Mark product by the Japan Environmental Association. * Please note that finished products processed and assembled using Acrylwaron environmentally friendly products cannot use the Eco Mark. ■ Durable and resistant to breaking. ■ Beautiful design It expresses the texture and feel of washi paper, allowing for the creation of a soft light space. ■ Excellent light and water resistance The acrylic material is superior in light and water resistance. ■ Molding processing is possible Since it uses acrylic printed film, it can be processed similarly to general acrylic resin boards, including heat molding. * The natural colors (P-80RE, P-81RE, P-85RE) may fade due to ultraviolet light, so please avoid outdoor use. * For more details, please refer to the PDF materials or feel free to contact us.

• plastic

Gently filter light through washi paper. It can be used with a panel feel while maintaining its beauty.

"Acrylwaron <Single-Sided Washi Paper Type>" is an acrylic decorative resin board that can be used like a panel, with washi paper laminated directly onto the acrylic sheet. It directly expresses the softness and beauty of washi paper. 【Features】 ■ Washi paper laminated directly onto the acrylic sheet ■ Directly expresses the softness and beauty of washi paper * Molding, bending processing, and maintenance of the washi paper surface are not possible. * For more details, please refer to the PDF document or feel free to contact us.

• plastic

Expressing the beauty of washi as it is. It is possible to create a soft light space.

The "Acrylwaron Print Type Basic Series" is a Japanese-style acrylic decorative resin board that enables the creation of a soft light space with a washi paper pattern. 【Features】 ■ Resistant to breakage ■ Molding processing possible (excluding 1.0mm thickness) ■ Washable ■ Excellent light resistance* ■ The PN type uses high-transmittance milky colors, making it ideal for situations where reflection from light sources and high whiteness are required. ■ P-80, P-81, and P-85 are optimal for incandescent light sources. ■ Adhesive processing is possible with acrylic solvents. *The natural colors (P-80, P-81, P-85, PN-80, PN-81) may fade due to ultraviolet rays, so please avoid outdoor use. *For more details, please refer to the PDF materials or feel free to contact us.

• plastic

The surface is finished with a special embossing process, making it supple and soft while diffusing light.

The "Acrylaron Print Type Everlight Series" is a product with a modern design created through embossing. It is resistant to breaking and achieves excellent light diffusion and light resistance. 【Features】 ■ Break-resistant ■ Excellent light diffusion ■ Excellent light resistance ■ Molding is possible (the surface embossing shape may change depending on the molding shape and conditions). *For more details, please refer to the PDF document or feel free to contact us.

• plastic

Acrylic decorative resin board that expresses subtle light contrasts and gradients with delicate gravure printing.

The "Acrylaron Modern Art Series" is an acrylic decorative resin panel that expresses Western sensibilities in a modern way. In addition to the standard and white types, which have subtle differences in shading, "P-406" uses two different printed films with distinct patterns to achieve a soft depth and high diffusion when light passes through. 【Features】 ■ Resistant to breakage ■ Washable with water ■ Can be bonded with acrylic solvents. ■ Molding processing is possible (excluding 1.0mm thickness) *For more details, please refer to the PDF materials or feel free to contact us.

• plastic

Supports 1200X2400mm! A cutting mat that is also ideal for large and long output materials.

Walon's cutter mat "Walon Power Mat®" is an ideal product for cutting various films, fabrics, and papers, as well as for large-format printers and cutting plotters. It is available in a thickness of 4mm and dimensions of 1200×2400mm (4×8 feet).

• mat

Soft texture using special fibers with approximately three times the burst strength of shoji paper.

"High-Tech Ace" is a product that maintains almost the same strength even when wet and is easy to replace. In comparison to the lower limit of the JIS standard bursting strength for shoji paper, which is 78.45 kPa, this product has an average value of 238 kPa. It is resistant to tearing and reproduces the elegant texture of washi paper. *For more details, please refer to the PDF document or feel free to contact us.

• Paper and pulp products

A Japanese-style interior material that expresses the beauty of washi as it is, with excellent water resistance and durability.

This is a Japanese-style interior material laminated with vinyl resin, featuring washi patterns and non-woven fabric patterns. Since it uses printed film, it does not absorb water from the edges, and the material itself can be washed with water. It can also be used for short-term outdoor event decorations. It has a high light transmittance, adding a delicate illuminated effect to the space. 【Features】 ■ Tear-resistant ■ Stain-resistant ■ Can be wiped with water and washed with water

• plastic

Preserving the beauty of washi paper, this Japanese-style interior material excels in durability and flame resistance, making it suitable for various spaces.

A wide variety of patterns, thicknesses, and sizes of traditional Japanese building materials. This special reinforced washi, laminated with polyvinyl chloride resin, includes basic washi such as unryu and plain patterns, which are based on Japanese culture and tradition, as well as craft washi made using various decorative techniques. 【Features】 ■ Tear-resistant ■ Stain-resistant ■ Can be wiped with water ■ Flame-retardant product certified / Certified by the Japan Flame Retardant Association ■ Creates a soft, illuminated space ■ Abundant variations in patterns, sizes, and thicknesses 【Awards】 HEAD Best Selection Award (now known as Mirai no Tane Award) 2016 from the HEAD Research Association.

• Paper and pulp products

A decorative film with a Japanese-style design that beautifully expresses the elegance of washi patterns and excels in aesthetic appeal.

This is a glass decorative film featuring traditional Japanese paper patterns and non-woven fabric patterns. By applying it to glass, it enables the creation of a soft, illuminated space. It can be used in various spatial designs, regardless of Japanese or Western styles. It has obtained non-combustible material certification from the Minister of Land, Infrastructure, Transport and Tourism. 【Features】 ■ Non-combustible material certification (see basic information) ■ Easy to process and install ■ Creates a soft illuminated space with traditional Japanese paper and non-woven fabric patterns

• Glass
• others

A Japanese-style interior material that has minimal expansion and contraction due to temperature changes, excellent durability, and is strong against impacts.

Japanese-style building material laminated with PET resin, which has low expansion and contraction due to temperature changes, using natural washi paper. When applied to shoji screens, it is less prone to sagging, has excellent durability, and is extremely strong against impacts. The surface is finished to resemble washi paper and can also be wiped with water. Depending on the settings, laser processing is also possible. 【Features】 ■ Less prone to sagging due to low expansion ■ Strong against impacts (about three times the burst strength of 0.2mm Waron sheet, according to our research) ■ Resistant to tearing ■ Resistant to dirt ■ Can be wiped with water ■ Creates a soft, illuminated space

• Paper and pulp products

Large partitioning, suitable for water-related uses such as bathrooms. Lightweight and safe, with a Japanese-style translucent design panel.

This is a Japanese-style decorative polystyrene (PS) resin board that is resistant to high humidity environments and suitable for use in water-related applications. It is lightweight, weighing less than half that of glass, and is less prone to breaking. It also expresses the texture of the material as it is, allowing for the creation of a soft light space. Additionally, the 4.0mm thick type is 2430mm long, making it ideal for large partition applications such as interior doors and space dividers. 【Features】 ■ Resistant to moisture ■ Less prone to breaking ■ Washable ■ Superior light resistance compared to general polystyrene resin ■ Lightweight and safe ■ Creates a soft light space

• plastic

Reinforced shoji paper with about five times the burst strength. It is resistant to tearing, breathable, and less prone to dirt.

A special reinforced shoji paper that is resistant to tearing and has approximately five times the bursting strength*. It is durable and long-lasting, with little change in strength even when wet. It features a beautiful, taut appearance without sagging. Additionally, it is designed to be less prone to dirt despite being breathable. It can be easily replaced without falling apart. A wide type suitable for large fixtures is also available. *The average bursting strength is 431 kPa, compared to the lower limit of 78.45 kPa for JIS standard shoji paper. 【Features】 ■ Tear-resistant, durable, and long-lasting ■ Breathable yet resistant to dirt ■ Beautifully taut appearance without sagging ■ Little change in strength when wet ■ Easy to replace ■ UV cut of over 90% ■ Creates a soft, illuminated space

• Paper and pulp products

An acrylic decorative resin board that faithfully reproduces the design of washi paper and can be used for various purposes. It also excels in light resistance and workability.

This is a Japanese-style acrylic decorative resin board that delicately expresses the beauty of washi paper, the texture of gauze, the material feel of stone and wood grains, and the art of wax dyeing, allowing for the creation of a soft light space. It can be processed similarly to standard acrylic resin boards (except for the 1.0mm thickness and one-sided washi paper laminated type). Additionally, product numbers starting with PN are based on high-transparency semi-milky acrylic resin boards, making them suitable for situations where reflection prevention from light sources and high whiteness are required. 【Features】 ■ Resistant to cracking ■ Molding processing possible (except for 1.0mm thickness and one-sided washi paper laminated type) ■ Washable ■ Excellent light resistance* ■ Creates a soft light space ■ Adhesive processing possible with acrylic solvents *Some product numbers cannot be used externally. For details, please refer to the catalog or product information on our website. https://www.warlon.co.jp/en/

• plastic
• Other polymer materials

Decorative resin panels with the beauty of washi, while also excelling in flame resistance and durability.

A variety of patterns, thicknesses, and sizes are available in traditional Japanese building materials. This is a decorative resin board that incorporates traditional Japanese culture and design, featuring cloud and plain patterns made from washi paper, which has been crafted using various decorative techniques and laminated with vinyl chloride resin. 【Features】 ■ Resistant to cracking ■ Stain-resistant ■ Can be wiped with water ■ Flame-retardant product certified / Certified by the Japan Flame Retardant Association ■ Creates a soft, illuminated space ■ The Everlight series is washable

• plastic
• Composite Materials
• Paper and pulp products

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.