Notice of Participation in the 37th Monozukuri World [Tokyo] Manufacturing Industry DX Exhibition

The smart glasses available for use in explosion-proof areas have been renewed! We will introduce examples of business reforms that could not be advanced until now!

Explosion-proof certified! Introducing the lightweight and durable wearable device "RealWear Navigator Z1," suitable for the oil, gas, and chemical industries! (Challenges in explosion-proof areas) ● There are no digital devices that comply with explosion-proof standards. ● Hands are occupied during gas-related work, making it impossible to use digital devices while working. ● We want to utilize digital devices so that even newcomers can perform tasks. ● We aim to improve work efficiency by eliminating paper during inspections and using digital devices instead. (Using the smart glasses "RealWear Navigator Z1") ● Promote digitalization by using explosion-proof certified smart glasses. ● As the smart glasses are 100% hands-free, even in situations where both hands are occupied, voice commands allow for manual reference, photo and video capture, and collaboration with headquarters. ● By integrating with AI (Azure OpenAI), it is possible to refer to procedures and manuals that are usually viewed on paper while working on the screen. NSW supports the promotion of factory DX by utilizing the smart glasses "RealWear Series"!

• Other embedded systems (software and hardware)

The first step of Factory DX! Digital support for manufacturing sites that can be started immediately! "Utilizing smart glasses and AI."

NSW is utilizing the smart glasses "RealWear" to support the promotion of factory DX! (Challenges in the factory) - I want to proceed with on-site work while referring to manuals and documents. - I want to safely take photos and videos even during hazardous work. - I want to use both hands while receiving real-time remote support. - In explosion-proof areas, everything is handwritten; I want to improve efficiency through digitization. (DX with RealWear) - Introduction and utilization of a 100% hands-free wearable device. - Even in situations where both hands are occupied, voice commands allow for referencing manuals, taking photos and videos, and collaborating with headquarters. - By integrating with AI (Azure OpenAI), I can work while referring to the procedures and manuals that I usually view on paper. - We can promote digitization using wearable devices certified for Zone 1 explosion-proof by Japan TII. ↓ Please also check out the front-line magazine for smart factories, FACTORY JOURNAL Vol.01. ↓

• Other embedded systems (software and hardware)

Over 100 companies have adopted it! It contains everything needed for IoT, allowing you to start IoT quickly and at a low cost.

"Toami" is a cloud-based platform that enables user companies to efficiently build systems utilizing M2M/IoT. Without having to individually address communication with devices, data accumulation, and further analysis and utilization, Toami combines its own development features and external service integrations to provide a one-stop solution. It offers features such as drag-and-drop development with over 50 types of widgets, secure integration with gateways, servers, wireless devices, routers, high-speed processing of large amounts of data, and API integration with external services. [Reasons for Choosing Us] ★ All-in-one for device control and system development! ★ Five Features of Toami (View) Easy and speedy application development (Collect) Information collection system compatible with various protocols (Store) Scalable data accumulation infrastructure (Protect) Robust security from the physical layer to the application layer (Connect) Integration with core systems and various web services/SNS *For more details, please refer to the PDF document or feel free to contact us.

• Business Intelligence and Data Analysis

Remote solution for visual inspection of analog meters! Solving challenges in manufacturing sites.

"LiLz Gauge" is a cloud service that utilizes low-power IoT cameras and machine learning to easily remote visual inspections of analog meters and similar devices. By linking the data obtained from this product with the IoT platform "Toami," it accelerates on-site support for predictive maintenance of equipment, production planning information, and labor reduction. It addresses challenges in manufacturing sites such as remote locations, high altitudes, and hazardous visual inspections. 【Features】 ■ Installation, shooting, data transmission, image analysis, and result visualization ■ Remote inspections without the need for power or network construction ■ Automatic reading of multiple instruments from a single image ■ Easy external integration via API ■ Compatible with various types of instruments *For more details, please refer to the related links or feel free to contact us.

• Other information systems

Manage equipment with digital twins! Achieve multi-site monitoring utilizing 3D space.

A solution called "ZeugMa" that allows for real-time visualization of site conditions from a distance, without the need to rush to the site. It is a solution service specialized in facility management that can integrate data from IoT sensors with walkthroughs and 3D models. 【Features】 - Centralized confirmation of equipment status - Understanding of equipment installation status from 3D spatial data - Bulk management of multi-site data - Customization of screens and functions 【Recommended for those facing the following issues】 - Inefficiency and lack of automation in equipment inspection tasks - Increased management burden due to multi-site management - Difficulty in early detection of bottlenecks - Inability to digitize analog data - Insufficient monitoring system due to labor shortages

• Integrated operation management

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube