25MP CoaXPress Area Camera with Near Infrared (NIR) Support

A high-resolution and high-speed NIR camera equipped with a CMOS sensor that enhances near-infrared sensitivity.

■Features This is a 25MP near-infrared (NIR) camera equipped with a model that enhances the near-infrared sensitivity of Gpixel's CMOS sensor "GMAX0505," capable of capturing images at up to 150fps with CXP-12×4Lane output. With a 1.1-inch image size and a 2.5×2.5μm pixel sensor, it supports C-mount while providing high resolution. The resolution is 5,120×5,120 square pixels, combining high resolution, speed, and miniaturization to meet the demands for compactness, speed, and high pixel count. The incorporation of an Ultra Low Power FPGA and excellent design technology has achieved a compact housing with a 70mm square size, resulting in low power consumption and excellent heat dissipation, allowing for use without cooling fans or heat sinks. It is also equipped with mounting taps on the front and four sides, delivering excellent performance for various applications in factory automation. It can be utilized in a wide range of fields, including surveillance systems, food, and medical applications, where high-speed and high-pixel near-infrared imaging is required.

• Monochrome camera
• High Speed Camera

Are you having trouble with your camera overheating?

With the CoaXPress camera from Japan Bopixel, it is possible to significantly reduce heat generation. This is a series of area scan cameras developed for high-speed image transmission in machine vision applications using 75Ω coaxial cables. It is ideal for situations where you want to extend the cable length while consistently capturing high-resolution and high-frame-rate images. We offer a diverse lineup ranging from 0.5MP to a maximum of 65MP, and there are models available where you can choose the connector orientation from the back (straight model) or the top (angle model). The camera housing is also equipped with mounting taps, allowing it to accommodate various installation positions and conditions. Thanks to a high-reliability design featuring low power consumption, low heat generation, and excellent heat dissipation with next-generation key devices, our cameras consume less power compared to other products with the same sensor and interface, achieving one of the smallest chassis sizes in the industry without the need for additional heat dissipation items.

• Color camera
• Monochrome camera
• High Speed Camera

With Japan Bopixel's "CoaXPress camera," it is possible to significantly reduce heat generation!

The transition from CCD to CMOS has accelerated the trend towards higher resolution, and the fps continues to increase, resulting in greater power consumption (and heat generation) of cameras. As a result, concerns about inspection accuracy due to thermal effects on lenses have increased, and the impact on objects and peripheral devices can no longer be ignored. At Japan Bopixel, we have successfully utilized "Ultra Low Power FPGA," which can reduce power consumption by over 50% compared to comparable FPGAs, instead of the FPGAs commonly adopted by most camera manufacturers, which are the main source of heat generation in industrial cameras. By fundamentally suppressing heat generation, we can significantly reduce the power consumption and heat of the camera, allowing us to solve thermal issues with a new approach that leverages the advantages of being a latecomer in the market. *For more details, please download the catalog or feel free to contact us.*

• Visual Inspection Equipment
• Monochrome camera
• Technical and Reference Books

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.