Introducing the history of NOAQ, the manufacturer of the stopwater board Boxwall.

Installation of 10 meters in 2 minutes is possible! Just place it on the ground to protect against floods! It is a simple installation type water barrier and waterproof board that replaces sandbags!

The easy-to-install water stop board "Box Wall" is effective for flood prevention. It is fixed in place by the water pressure applied to the main body, stopping the water. Therefore, there is no need for any ground anchoring such as anchor bolts. No tools are required. Because it is used during disasters, it has a simple and easy-to-understand structure. 【Features】 ■ Can be installed in about 2 minutes for a 10m length (for a team of 2 people) ■ High mobility and easy installation method allow for quick preparation ■ Utilizes the water pressure on the main body to block floods ■ Can be stacked for storage, saving space ■ Can be reused with simple cleaning ■ Suitable for small-scale protective measures 【As part of BCP efforts】 According to a Cabinet Office survey, about 70% of companies regularly review their BCP, with flood prevention ranking second among their initiatives. ≪Source≫ Cabinet Office: Policy Coordination Director (Disaster Prevention) Office of the Director for Disaster Prevention Planning. "Results of the Fiscal Year 2023 Survey on Corporate Business Continuity and Disaster Prevention Efforts" The Box Wall enables a reduction in downtime during installation. Demonstration units are also available for viewing. *For more details, please contact us or download the PDF for more information.

• Other safety and hygiene products
• Other office supplies
• others

Protect your assets from water damage caused by guerrilla rainstorms and typhoons! A simple, easily installed water barrier that replaces sandbags. Can be set up quickly and with a small number of people.

The "BoxWall BW102" is a waterproof barrier that can be installed without the need for special tools or skills, and it connects the joints of the units. Until now, the BoxWall had only one type with a waterproof height of 50 cm, but a new type that accommodates 1 meter has been introduced. Please use it for flood prevention. Japan's rainfall is on the rise due to the effects of global warming, and forecasts suggest that by the end of this century, Japan's rainfall could double compared to current levels. Hazard maps are being updated daily, and we have received requests from customers for a waterproof height of 1 meter. Each joint can be adjusted by ±3 degrees, making it suitable for curved installation locations. It is modularized for easy handling, and by simply connecting the joints, flood protection and water intrusion measures can be implemented. 【Features】 ■ Excellent high mobility waterproof barrier ■ No special tools required ■ Can be installed just by placing it on the ground ■ Utilizes water pressure to block floods ■ Easy management and high cost-effectiveness *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products

We will lend you a demo product for those who can't understand without actually seeing the item!

In response to voices saying they don't know what it actually is or how to arrange it, we will lend out demo products free of charge. Explanatory meetings are also possible. No anchors or tools needed! A simple water stop system that can be set up by two people in about two minutes for 10 meters! A flood prevention measure that replaces sandbags. The easy-to-install water stop board "Box Wall" is effective for flood prevention. It is fixed and stops water due to the water pressure acting on the main body. No tools are required. Because it is used in emergencies, it has a simple and easy-to-understand structure. 【Features】 - Can be set up in about 2 minutes for 10 meters (for a team of 2 people) - High mobility and easy installation method allow for quick preparation - Utilizes water pressure on the main body to block floods - Can be stacked for storage, saving space - Can be reused with simple cleaning - Suitable for small-scale protective measures 【Lending Details】 BW52: 2 main units Sealing strip material: 2 pieces Other lending options are also available, so please feel free to inquire. You only need to cover the shipping costs for the return. *For more details about the product, please contact us or download the PDF to view.

• Other safety and hygiene products
• Other office supplies
• others

By shortening response times during disasters, we will reduce on-site downtime!

This is a new flood and inundation prevention product that frees you from the concerns of decreased productivity and downtime caused by setting up sandbags and similar items for disaster preparedness. It is a water barrier that prevents water from entering through building doors and shutters. No anchors or tools are required! A simple water barrier system that can be set up by two people in about two minutes for a length of 10 meters, serving as an alternative to sandbags for flood prevention. The easy-to-install water barrier "Box Wall" is effective for flood prevention. It is secured by the water pressure acting on the main body, providing a watertight seal. No tools are needed. Because it is used during disasters, its structure is designed to be simple and easy to understand. 【Features】 - Can be set up in about two minutes for a length of 10 meters (with a team of two people) - High mobility and easy installation allow for quick preparation - Utilizes water pressure on the main body to block floods - Can be stacked for storage, saving space - Can be reused with simple cleaning - Suitable for small-scale protective measures *For more details about the product, please contact us or download the PDF to view.

• Other safety and hygiene products
• Other office supplies
• others

It can be used for leak prevention and extinguishing fires in electric vehicles by enclosing inward.

By combining parts designed for inner curves called "in-corners," it is possible to enclose objects. There is a proven track record of use for preventing chemical leaks and for firefighting activities involving electric vehicles. *Please note that this is merely a substitute for sandbags and does not guarantee complete water stoppage. No anchors or tools required! A simple water-stopping system that can be set up by two people in about 2 minutes for a 10m length! It is secured and stops water due to the water pressure acting on the main body. No tools are needed. Because it is used in emergencies, the structure is designed to be simple and easy to understand. 【Features】 - Can be set up in about 2 minutes for a 10m length (for a team of 2 people) - High mobility and easy setup allow for quick preparation - Utilizes the water pressure on the main body to block floods - Can be stacked for storage, saving space - Can be reused with simple cleaning (when the object is water) - Suitable for small-scale protective measures *For more details about the product, please contact us or download the PDF for more information. *Feel free to inquire about resistance to chemical substances as well.

• Other safety and hygiene products
• Other office supplies
• others

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.