Notice of Exhibition at TECHNO-FRONTIER 2025 from July 23 (Wednesday) to July 25 (Friday).

A circuit protector compatible with industrial communication functions has arrived. An innovative product that allows for remote monitoring and control.

【Product Overview】 The 'REX12D-T' is an electronic circuit protector dedicated to DC24V that monitors current and voltage through industrial communication (IO-Link, ModbusRTU, with additional support planned for the future), allowing for appropriate protection. With the ability to monitor current and voltage, it becomes easier to understand equipment degradation, leading to preventive maintenance. It features a slim design with a width of 12.5mm for two channels and approximately 6.3mm or less for one channel. The elimination of bridging wiring on the top of the device enables the miniaturization of control panels. 【Capabilities of the Communication Function】 Remote operation of the circuit protector (On/Off/Reset) Monitoring of current and voltage Configurable alarm current values (50-100% of rated value) Acquisition of device and parameter information Disconnection information 【Hardware Features】 Push-in terminals Expansion possible up to 40A/maximum 16 channels Connection possible with lever wiring, eliminating the need for busbars One LED displays five status indicators Slim body of 12.5mm *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Other electronic parts

Adopts an electronic cutoff method! A smart circuit protector that safely protects the DC24V circuit.

This is an electronic circuit protector specifically designed for DC24V. It is a smart circuit protector that makes appropriate judgments for various events in DC24V circuit loads. It disconnects immediately during a short circuit, cuts off at the appropriate time during overcurrent, and ignores inrush current, allowing the load to operate safely for a longer duration. Additionally, it complies with UL1604 Class 1, Div 2, Group ABCD, which permits its use in hazardous locations, making it suitable for protecting DC circuits in plant equipment. It is also compliant with UL NEC Class 2 for currents between 0.5-3.8A. Remote ON/OFF operation is possible as an option. Rated voltage: DC24V (also available for DC12V and DC48V) Rated current: 0.5-16A

• Other FA equipment

Can be used for protecting machine control panels and branch circuits! Achieve multifunctional connections with a wide range of options such as bus bars and contact prevention covers.

The "4230" is a breaker certified under UL489 and UL1077, compliant with the testing standards of US UL standards and Canadian CSA standards. Breakers that meet the conditions of the National Electrical Code (NEC) can be used for the protection of branch circuits. It supports various rated capacities and interrupting capacities, making it suitable for use in the North American market. We offer UL489 1-3 poles (DIN rail mount) and UL1077 1-4 poles (DIN rail mount). 【UL489 Specifications (Partial)】 <1-3 poles (DIN rail mount)> ■ Interrupting method: Thermal-magnetic ■ Rated voltage: AC240V, AC415V, DC60V, DC125V ■ Rated current: 1-63A ■ Interrupting capacity: AC/DC 10,000A ■ Dimensions: D60.2×W17.6×H116mm (1 pole) ■ Modules: Auxiliary contacts, alarm contacts, remote OFF *For more details, please refer to the PDF document or feel free to contact us.

• Other process controls

Combining overcurrent protection and switch functions into one unit reduces the number of components. A design that blends well with the equipment. This product is suitable for circuit protection in applications.

The "Switch-Compatible Circuit Protector 3120 Series" eliminates the need for components such as switches, harnesses, fuse holders, and fuses, reducing the number of parts to achieve lower costs and compact size. It does not require fuse replacement, minimizing downtime. When an overcurrent occurs, the circuit breaker function activates, and the rocker switch automatically turns OFF. By removing the abnormal load and turning the rocker switch ON again, it can be reused. Its design harmonizes with various devices and equipment, making it suitable for a wide range of applications. 【Features and Specifications】 ■ Complies with international safety standards for medical electrical equipment (EN60601-1) ■ Also meets UL1077, CSA, VDE, and CQC standards ■ Suitable for a wide range of applications including machine tools, scientific instruments, construction machinery, vehicles, and motors ■ Dimensions: D25×W48×H52mm ■ Products with modules such as auxiliary circuit modules are also available Additionally, we offer: The "3130 Series" with 1-pole to 3-pole options, The fuse holder type "1110 Series," and The "3140 Series" with 3-pole and 4-pole options available in IP66 specifications. We provide circuit protection suitable for our customers.

• switch

The idea of implementing a circuit protector on the circuit board greatly contributes to the miniaturization of the product.

The "1410 Series" is a compact circuit protector that can be mounted on a circuit board. Our 1410 model is UL1077 certified and supports microcurrents from 0.63A to high currents of 10A. It is a product that can be used multiple times after the overcurrent protection function is activated. Additionally, there is no need to choose a large rated current (frame) to avoid startup current trips, allowing for miniaturization of PCB patterns. 【Features】 ■ Compact single-pole resettable circuit protector ■ PCB mountable ■ Fast tripping characteristics ■ Signal output possible with C contact circuit (B contact available) *For more details, please download the PDF or feel free to contact us. Related link - https://www.e-t-a.co.jp/%E3%83%9B%E3%83%BC%E3%83%A…

• Other electronic parts

Covers voltage from 60V to 1500V and current from 150 to 1000A! Introducing our compact-sized contactors available for sale.

We handle the high-voltage contactor "C300 Series." C310 is a single-pole bidirectional DC/AC NO (normally open) contactor. The voltage options are 60V, 1000V, and 1500V, with current ratings of 150A, 300A, and 500A. C300 is a single-pole bidirectional DC NO (normally open) contactor with a voltage of 1000V and a current rating of 500A. C320 is a single-pole bidirectional DC/AC NO (normally open) contactor with voltage options of 60V and 1500V, and a current rating of 1000A. It features a highly versatile voltage and current range, enabling safe switching under high loads. 【Features】 ■ Lightweight and compact ■ High safety ■ DC bidirectional with permanent magnet blowout ■ High-rated short-time current capacity of 3000A/1sec ■ Double-break contacts ■ Very efficient newly developed arc chamber *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

A contactor that supports high voltage up to 3000V and large current up to 2000A. It is a new contactor that can also function as a disconnector and changeover switch.

The "CP Series" is a high voltage and high current contactor that supports up to 3000V and 2000A. Thanks to patented technology, it enables bidirectional conduction (high voltage and high current) and has achieved compactness and lightweight design compared to contactors with the same specifications. With high switching performance and reliability, it enables cost-effective operation and contributes to the miniaturization and space-saving of embedded devices. Additionally, the drive section and arc chamber section have a separated structure, ensuring high maintainability. The product range is also wide, accommodating various applications. 【Features】 ■ Voltage: AC/DC bidirectional 3000V, 1500V ■ Current: Maximum current 2000A, 1500A, 1200A, 1000A, 800A, 600A ■ Main contacts: Normally open (NO), normally closed (NC), changeover (CO) *This product is single-pole, but can be used in multi-pole configurations by connecting multiple units. ■ Auxiliary contacts: Up to 4, compatible with mirror contacts Contactors from the German company Schaltbau are used in renewable energy and railway industries worldwide, making them highly reliable products.

• Other electronic parts

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.