[JASIS WebExpo Exhibition] Limited-time release! Archive seminar 'Basics - Kiso - Kiso' The first step towards strategic GC column selection.

Evolved Blue Liner! Innovative deactivation treatment, good reproducibility.

We would like to introduce our "Topaz GC Inlet Liner." By selecting a highly inert liner, we can prevent potential issues such as ghost peaks, tailing, peak disappearance, and deterioration of reproducibility. We offer a wide range of products for GC and Agilent GC. Please feel free to contact us if you have any requests. 【Features】 ■ Innovative inertization treatment ■ Good reproducibility ■ Improved productivity *For more details, please refer to the PDF document or feel free to contact us.

• Separation device

Important for food safety! Separation of isobaric polycyclic aromatic hydrocarbons.

The "Rxi-PAH GC Column" is a product designed by Restek that can uniquely separate polycyclic aromatic hydrocarbons (PAHs), which are important for food safety and cannot be separated by mass spectrometry, thanks to its high phenyl content stationary phase. It can easily separate difficult target substances like PAH4 from the European Food Safety Authority (EFSA) and allows for accurate quantification. You can achieve results that are not possible with general GC columns. 【Features】 ■ Separation of all EFSA PAH4 compounds ■ Suitable separation of chrysene from interfering PAHs ■ Complete separation of benzo[b], [k], [j], and [a] fluoranthene ■ 360℃ thermal stability ■ Analysis of low-volatility dibenzopyrene is possible *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

Low bleed, exceptional reproducibility! Groundbreaking Rxi column technology that lowers detection limits.

The "Rxi GC Column" is a high-performance GC column that combines excellent inertness, low bleed, and high inter-lot reproducibility. It excels in reproducibility of column efficiency, retention time, pre-bleed, and inertness for each column. Additionally, to provide high performance, all columns undergo individual quality inspections. Please utilize the more accurate and reliable results offered by this product for trace analysis. 【Features】 ■ Low detection limits ■ Highest level of inertness ■ Low bleed ■ Good reproducibility *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Packaged in a blister pack to maintain cleanliness! The evolved Blue Liner.

The "Topaz Liner for GC" is a blue liner with excellent stability. Since it is packaged in a blister pack, it can maintain cleanliness, and the conditioning time after liner replacement is reduced. With longer system uptime, more samples can be analyzed, leading to cost savings. 【Features】 ■ Inertness ■ Lot-to-lot reproducibility ■ Productivity ■ Blister packed *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

This is an online simulation software for GC method development/optimization that anyone can use for free by registering.

The EZGC Chromatogram Modeler has been renewed. It has become easier to use with the addition of advanced options such as selection of liquid phases, changes in carrier gases, and optimization of the obtained results.

• Analytical Equipment and Devices

Easy, no download required! Simulate the changes in separation.

Restek's "Pro EZGC Chromatogram Modeler" is a web application that provides free separation simulations using WCOT-type GC columns. You can easily simulate separation checks and changes in separation when modifying the temperature program directly on our website without downloading anything to your PC. Various columns with significantly different selectivities of liquid phases are registered, and each liquid phase also has an available compound library. 【Features】 ■ Free separation simulations ■ Simulations can be performed on the website ■ Various columns with significantly different selectivities of liquid phases are registered ■ Each liquid phase has an available compound library ■ Multilingual support *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

In civil engineering sites, steel plates have traditionally been the standard, but in recent years, more companies are choosing wooden mats to suit site conditions. Hyper CLT mats, utilizing wood CLT as civil engineering materials, are being introduced for a wide range of applications including public works, temporary roads, access routes, material yards, and temporary parking lots. The reasons for their selection are not simply because they are "made of wood." The 5×10 panels weigh about 230 kg, making them lightweight and easy to install and remove even with small machinery, with a maximum capacity of 40 panels on a 10-ton truck. This also leads to improvements in workability and transportation efficiency. Furthermore, they add different values to the site compared to steel plates, such as reducing glare and radiant heat, noise control, CO2 fixation, and consideration for aesthetics. They can be partially used only where needed, allowing for differentiation in use from steel plates. This technology is registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS, with the registration number "TH-250021-A." The introduction of Hyper CLT mats is expanding as a new option that combines wood, NETIS, and civil engineering.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.