Added 'Kansai Expo x Optical Thin Films Episode: 4' to the technology trend keywords.

It is a mirror that reflects light of a specific wavelength and transmits light of other wavelengths.

【1】Are you facing any of these issues? ◆ Is it possible to maintain a uniform reflectance for multiple wavelengths? ◆ Is it manageable if the reflectance decreases at specific wavelengths? ◆ Is color reproducibility achievable? ◆ Is there no problem with the stability of optical performance due to temperature changes or variations in environmental conditions? ◆ Is it possible to ship parts with a special shape? 【2】What is a dichroic mirror? A dichroic mirror is a mirror that reflects light of specific wavelengths while allowing other wavelengths to pass through. It consists of multiple layers, each with different optical properties. This characteristic allows for the effective separation, combination, or blocking of light at different wavelengths. 【3】Features of dichroic mirrors - Spectral separation Dichroic mirrors are used for spectral separation by selecting and reflecting or transmitting light of specific wavelengths from incident light. For example, they are used in optical devices that extract and detect light of specific wavelengths. - Light filtering They are used as filters to selectively remove light of specific wavelengths. This allows for the removal of unwanted light, enabling only the desired wavelengths to pass through.

• Other optical parts
• Distance measuring device
• Sensors

We propose a half mirror with abundant achievements. It is a functional half mirror that can arbitrarily split light into reflected and transmitted rays.

【1】Are you facing any of these issues? ◆ Can the degree of transmittance and reflectance be adjusted? ◆ Is there a way to modify it since the appearance changes with the angle? ◆ Is it possible to design and deposit even with dielectrics? ◆ Given the range of incident angles, can it be taken into consideration? ◆ The shape is special, but can it be shipped as a component? 【2】Features of the Adachi New Industry half mirror It is a functional half mirror that can arbitrarily split light into reflected and transmitted beams. By depositing dielectrics in multiple layers, it achieves extremely low absorption and minimal light loss, allowing for high-efficiency light splitting compared to using metal films. This product has a proven track record of being used in various devices, including FA sensors.

• Other optical parts
• Distance measuring device
• Sensors

It is a filter designed to transmit light in two specific wavelength bands while blocking (preventing) other wavelength bands. It is ideal for surveillance cameras and similar applications.

1) Are you facing issues like this? ■ I want to pass visible light and part of the infrared wavelength (850nm), is that possible? ■ I definitely want to cut out the blocking range that causes noise. ■ Since there is a range of incident angles, can that be taken into account? ■ The shape is special, but can it be shipped as a part? 2) Dual-band pass filter (multi-band pass filter) This is a filter designed to transmit light in two specific wavelength bands while blocking (stopping) other wavelength bands. In addition to regular IR cut, it has the function to selectively transmit only specific near-infrared wavelengths (such as 850nm, 905nm, 940nm, 1064nm). For example, it is ideal for applications that require monitoring during both day and night by transmitting specific visible light and specific near-infrared light. With 40 years of experience, we have achieved sharp wavelength separation and high transmission rates. Our unique control technology during film formation allows for high durability and reduced shift.

• Other optical parts
• Surveillance Cameras
• Sensors

It is a dielectric multilayer film filter that transmits visible light and reflects near-infrared light.

It is used as a near-infrared cut filter that adversely affects CCD devices such as video cameras. The optical characteristics, such as the wavelength position with a transmittance of 50%, transmittance, and cut wavelength band, can be set arbitrarily. (Are you facing such challenges?) Is it possible to cut only the wavelength of near-infrared light? I want to allow visible light to pass while blocking IR wavelengths. I want to suppress light that causes noise and increase the sensitivity of the sensor. Can the wavelength range I want to transmit be custom adjusted? Is it possible to process it to chip size?

• Other optical parts
• Color camera
• Sensors

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Introducing a "non-destructive testing device as an alternative to the submerged test" for pharmaceutical packaging products. "Complete vial leak testing device | MSQ-2002 series" Fully automating leak tests for various vials, bottles, eye drops, and cylindrical containers. Please check the link below for videos and catalogs.