POWTEX2025 will exhibit at the International Powder Technology Exhibition Osaka!

All pins and discs rotate! Centrifugal force acts, allowing even adhesive and cohesive materials to be finely ground without sticking.

The "EM-1A" is a dual-side disc rotation type exceed mill. The raw materials supplied in a measured amount from the feed inlet are introduced to the crushing section from the center of the rotating main body disc. They are crushed by the impact of 346 pins attached to the main body and door side discs, which rotate at high speeds in opposite directions, and are discharged from the lower outlet. The clearance between the pin tips and the disc is maintained at a minimal level, and the relative rotation of the two discs generates a powerful impact force due to the combined peripheral speed of the material disc, enabling fine grinding. 【Standard Specifications (Partial)】 ■ Rotational Speed - Door Side: Up to 12,000 rpm (Variable Speed) - Main Body Side: Up to 8,000 rpm (Variable Speed) ■ Required Power - Door Side: 3.7 kW + Inverter - Main Body Side: 3.7 kW + Inverter *For more details, please download the PDF or feel free to contact us.

• Crusher
• Fine grinding machine

A unique classifier that carries powder particles on an air flow and passes them through a screen.

To classify powder particles into the required sizes (a process called classification), there are two common methods: using a screen (sieve) and using air flow to classify based on differences in specific gravity (air classification machine). It is not feasible to achieve 100% or a mixing ratio of 0% with an air classification machine, and a vibrating sieve cannot handle large volumes due to issues like clogging. The "Micro Shifter" is a unique classification machine that allows powder particles to pass through a screen while being carried by an air flow. The newly developed fan-less type (NF type) incorporates a specific gravity sorting mechanism, achieving higher precision classification. The "Air Jet Sieve Particle Size Analyzer" uses dedicated JIS standard sieves and can measure down to a minimum of 20μ. 【Features】 ■ High precision classification and sorting ■ Can handle easily agglomerated fine powders ■ Can process adhesive powders ■ High reliability due to screen type ■ Screen replacement is easy with a one-touch mechanism ■ Easy internal cleaning ■ Minimal vibration ■ Can be used for removing foreign materials such as hair and debris from powders, as well as removing powder from particles ● For more details, please contact us or download the catalog.

• Other powder equipment

A shock-type crusher with a proven track record of over 10,000 units delivered across a wide range of fields.

The raw materials are struck by the impact force of the rapidly rotating rotor and are crushed until they are smaller than the hole diameter of the screen. Specifically, coarse crushing and dispersion are performed by the protrusions of the inner rotor and the fixed plate, while the outer rotor and the screen add shear action to the impact force, simultaneously causing the raw materials to collide with each other and become finer. This process is repeated until they are smaller than the hole diameter of the screen, at which point they are discharged. Inside the crushing chamber, air generated by the rotation acts on the suction, dispersion, discharge, and cooling of the raw materials. For more details, please contact us or refer to the catalog.

• Crusher

Small body, high power. A formidable high-tech stone mill that can grind down to ultra-fine powder.

Micropowder is a "small milling machine" that combines the traditional principle of a stone mill with modern ideas and the latest technology. It can grind dried ingredients into ultra-fine powder, producing high-quality powder with uniform particle size due to the stable up-and-down movement of the lower millstone. You can easily adjust the desired particle size using the dial setting for particle size adjustment. Additionally, the alteration of ingredient components and flavor degradation caused by milling has been a significant challenge. By controlling the friction heat during milling with circulating cooling water and applying a cut-and-grind method based on the stone mill principle, we have eliminated the alteration of ingredient components and flavor degradation. ● For more details, please download the catalog or contact us.

• Fine grinding machine

Just set up the commercially available stainless steel container! It enables soft mixing and three-dimensional mixing and stirring.

The pot blender (swing type) is a small-scale mixing machine that uses commercially available stainless steel tanks. It is ideal for mixing tasks that require frequent product changes, as the containers are easy to remove and replace. Cleaning is straightforward, and since it uses standard stainless steel containers, there is no need to transfer the mixture after blending. The entire container rotates slowly, allowing for gentle mixing. The mixing time can be easily set, enabling mixing tailored to the raw materials. 【Features】 - Addresses safety concerns and physical strain associated with manual labor - Mixing parts use commercially available stainless steel containers - Easy to set up for mixing tasks as it can be used as is - Simple container removal - Gentle mixing allows for soft materials to be blended - Simple structure makes maintenance easy *For more details, please refer to the catalog.

• Other powder equipment

Further cost reductions can be achieved! Didaster with inlet deflector.

The "XP Series" deduster with an inlet deflector effectively removes foreign substances when incorporated into plastic manufacturing plants. It can increase the ability to remove foreign substances from plastic pellets and resin pellets compared to standard dedusters with simple operation. Additionally, by introducing this deduster with an inlet deflector, there is no need to install expensive and heavy rotary valves that are typically used as supply devices for dedusters. 【Features】 ○ Processing capacity ranges from 18t/h to 150t/h ○ The deflector can be moved to any desired position For more details, please contact us or download the catalog.

• Hazardous material processing

Easy operation and simple configuration. Speed can be selected according to the materials! Designed with safety measures in mind during operation.

The "Ribbon Mixer" is an easy-to-handle mixing machine with a simple structure. By rotating the ribbon while supplying raw materials and discharging them, it reduces the load at startup, allowing for mixing with a small amount of power. This contributes to reducing equipment costs and running costs. We can also accommodate custom specifications such as casing jackets, integrated weighing devices, and inverted main bodies (small size) according to your requests. 【Features】 ■ Custom-made capacity and shape are possible ■ No leakage of powder and granules outside the process ■ Small installation area and low height ■ The top cover can be adapted for supply port installation as desired ■ A sanitary type that allows for complete cleaning is also available * For other functions and details, please download and view the catalog. Feel free to contact us as well. * Test machines are also available! We are ready with test machines to meet your needs for crushing, classification, sorting, and transportation. ★ Exhibited product at the "International Powder Technology Exhibition Osaka 2021"

• Mixer/agitator

Easy to move with casters! It crushes easily with a small amount of raw materials in a simple manner.

The "MM-1-120" is a crusher designed for easily crushing small amounts of easily crushable raw materials. The raw materials are spread in the supply hopper and fed into the crusher gradually through a hole. The supplied raw materials are crushed instantly by a disc attached to the rotating plate, reducing them to a size smaller than the hole diameter of the installed screen (a perforated metal plate), and collected in a lower bucket (stainless steel can). 【Features】 ■ Internal inspection can be easily done without tools by simply removing two knobs at the front of the main unit. ■ Screen replacement is one-touch. ■ The air generated by rotation is filtered through an exhaust cloth to prevent dust generation. ■ The frame is equipped with casters for easy movement. *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

Achieving astonishing vertical vibrations! A strong vibration sieve suitable for classifying fine powders, oil content, and adhesive powders.

The "FS High Shifter" is a strong vibration sieve that adds vertical strong vibrations to normal gravity drop. The raw materials on the screen are violently bounced up by wave motion, successfully adding crushing and dispersion classification effects to conventional screening. As a result, it is also effective for classifying fine powders, oil content, and adhesive powders. 【Features (Comparison with Conventional Products)】 ■ Improved vertical amplitude 2-3 times that of conventional machines (compared to our company) ■ No contamination concerns without mesh tapping ■ Suitable for classification, foreign matter removal, and liquid filtration ■ Compact design allows for inline operation ■ Movable with caster wheels equipped with adjustable feet *For more details, please refer to the PDF document or feel free to contact us.

• Sieve/Shaker

High-speed mixing of chemical products, resins, food, etc. A wide range of products in various sizes. Mixing tests are currently being accepted.

The "AVALONG High-Speed Mixer" mixes by stirring with rapidly rotating blades, enabling high-precision mixing in a short time due to its powerful convection and diffusion effects. It can achieve over 2000 rotations per minute, preventing uneven mixing. From a compact model with a total capacity of 15L to a large model of 1500L, you can choose from a wide range of products to meet your needs. It can be utilized for various purposes such as mixing, dispersing, drying, granulating, and surface modification. 【Features】 ■ Liquid addition during mixing is possible ■ Heating and cooling control through a jacket structure ■ Minimal internal residue, making cleaning easy when the lid is opened ■ Standard two-stage blades are incorporated, and four-stage blade specifications are also available *You can view product materials from the "PDF Download." ★ Mixing tests for your desired raw materials are possible. (Please prepare the raw materials.) For more details, feel free to contact us.

• Mixer/agitator

Cleaning technology suitable for all pellets before product shipment, after transportation, and before manufacturing.

"Pelletron Didasters" is a super high-precision separation and removal device that efficiently separates and removes dust such as cutting chips, fines, powdery fluff, and strip fluff (which may mix in during processes like air transport) from pellets.

• Resin processing machine

Direct connection pin-type crusher without a screen

The High-Speed Pin Mill Exceed Mill EM-2 is a grinding machine that can achieve fine grinding without the use of a screen, as it crushes with numerous pins. It produces finely powdered materials in a short time. It is a highly efficient and compact grinding machine with a direct motor connection. By adopting a direct motor connection for the pin mill, energy loss has been significantly reduced, improving grinding efficiency. With fewer components, the running costs and maintenance requirements have been greatly improved.

• Other food machinery

Fusing the principles of traditional stone mills with modern ideas. Easy maintenance as well.

A small milling machine that combines the traditional principle of a stone mill with the latest modern technology. It is an amazing high-tech stone mill that can grind down to ultra-fine powder.

• Food Processing Equipment
• Crusher

Crush powerfully with a small motor! Ideal for coarse crushing in a wide range of applications from ores to food and chemicals.

The "Hammer Crusher" is a coarse crusher that powerfully crushes large raw materials. The hammer pins attached to the rotor stand upright due to the centrifugal force of high-speed rotation, and the tips of the hammers deliver a significant impact force at maximum peripheral speed, crushing lump, sheet, and granular raw materials to about a few millimeters. When the hammer strikes hard or difficult-to-crack materials, it swings and repeatedly delivers impacts, allowing for a large crushing capacity with a small motor compared to crushing all at once with fixed hammers. The product particle size is determined by the rotation speed of the hammers and the hole diameter of the attached screen.

• Other processing machines
• Crusher
• Crusher

Fully cleanable mixing machine, ribbon mixer, sanitary specifications.

A mixing machine with a body casing that has a fully welded structure and can be completely cleaned. ■Features■ ■ The case is designed with a fully welded structure and a clever connection of the shaft to achieve complete cleaning. ■ The ribbon part is also designed with cleaning in mind. ■ The seals in the bearing section are made of a two-part resin for easy removal. ■ Volume: 50 to 1,500 liters (actual capacity). ■ Discharge methods: slide gate, swing gate, choke valve. ■ Materials: contact parts made of SUS304/316/316L; seal resin made of nylon and others. ■ For other functions and details, please download the catalog or contact us.

• Mixer/agitator

Low wear and high durability crusher. Multi-purpose, high performance, and low price with over 10,000 units sold.

The "Makino Type Crusher DD Series" features a directly connected rotating plate that reduces transmission loss, while also achieving cost reduction through simplified structure. The attached blades on the rotating plate are hardened, making them resistant to wear and providing excellent durability. Additionally, the shape of the blades has been modified from previous models to achieve further fine grinding. It is compatible with various raw materials such as ores, resins, gypsum, glass, and grains. 【Features】*For details, please refer to the catalog. ■ Achieved approximately 30% cost reduction (compared to our company) through structural simplification ■ No maintenance required for belt adjustments due to direct motor connection ■ Special cast steel used for blades extends the lifespan of consumables ■ Capacity increase is possible with only motor replacement ■ Consideration of blade arrangement reduces noise and airflow generation ■ Changing the rotation speed is easy with an inverter ◎ For more information, please refer to the PDF materials or feel free to contact us.

• Crusher
• Crusher/Mill

Creating a new "form" of powder and particle transport. Transporting without breaking - Pivot Conveyor.

The pivot conveyor KLS type and KLL type are pivot conveyors that safely, reliably, and quickly transport all types of powders and granules in horizontal, vertical, and directional movements. Once the material is supplied into the bucket, it is conveyed to the exit without losing its original shape, ensuring safe transport of granular materials. The flanges of the buckets overlap between each bucket, preventing spills during supply. Additionally, a skirt is equipped at the supply opening to prevent lateral bouncing. For more details, please contact us or refer to the catalog.

• Powder Conveyor Device

About ROAD: The "Roundtable on the Purpose of Autonomous Driving (ROAD)" conference series has evolved into a unique platform for interdis-ciplinary dialogue and international collaboration in the field of autonomous driving and autonomous mobility. Established in 2016, ROAD has brought together researchers, industry leaders, and public sector stakeholders from six countries across three continents. Based on this background, the upcoming ROAD 2026 will focus on "safety” and "driving AI”—the final pieces of the autonomous driving puzzle—to advance discussions on establishing the foundational framework for ensuring safety quality and obtaining regular-tory approval for autonomous driving. We also intend to discuss the international commonalities and differences regarding the social value brought about by ADS vehicles in terms of automation, intelligent driving, and mobility. We have established a total of five compelling themes for the Round Workshops, consisting of two topics related to “The Last Piece” and three topics related to the social value of ADS, as shown below. 1) Round Workshop 1 - Horizons of E2E Driving AI → Can AI Understand the Driving Environment Like Humans? 2) Round Workshop 2 - Beyond the Unknown: Safety Cases for ADS → Can Safety Ever Be Proven? 3) Round Workshop 3 - Envisioning Smart City Mobility → Can Smart City Mobility Bridge the Mobility Divide? 4) Round Workshop 4 - Logistics Enhancement Through Autonomous Tracking → Will Logistics Become Human-Free? 5) Round Workshop 5 - The Evolution of CASE: SDV/AIDV → Will Automakers Become AI Companies? We hope you’ll all join us!

[Speaker] Masashi Sugita, President and CEO of LEX Style Co., Ltd. [Key Lecture Content] The power consumption of AI servers used in data centers has significantly increased, making traditional air cooling insufficient for operation. This lecture will organize the requirements for introducing a liquid cooling system into air-cooled data centers and explain the implementation method using free cooling with specific design details. When handling high-density AI servers, energy efficiency is required, and the widely used energy efficiency indicator, as well as the Ministry of Economy, Trade and Industry's Resource and Energy Agency's PUE regulation of "1.3 or below," will be explained along with practical operational insights. [Lecture Items] 1. Heat dissipation methods for high-density, high-heat AI servers 2. Basics and importance of PUE/pPUE 3. PUE regulation of "1.3 or below" by the Ministry of Economy, Trade and Industry's Resource and Energy Agency 4. AI server implementation and requirements for new data centers 5. Summary and future outlook 6. Q&A / Business card exchange

[Key Lecture Content] 1. Promotion of SAF Introduction Yasushi Yamashita, Director, Carbon Neutral Promotion Office, Aviation Bureau, Ministry of Land, Infrastructure, Transport and Tourism 1. Importance of SAF in the decarbonization of the aviation sector 2. Initiatives to promote the introduction of SAF 3. Q&A / Business card exchange 2. Japan Airlines' Challenge Towards Net Zero CO2 Emissions by 2050 Kazuki Hirotani, Group Leader, GX Planning Group, Sustainability Promotion Department, Japan Airlines Co., Ltd. 1. Introduction of our five initiatives for CO2 emission reduction 2. Initiatives for reducing fuel consumption (introduction of fuel-efficient aircraft, operational improvements) 3. Initiatives for fuel transition (sustainable aviation fuel SAF) 4. Initiatives for reductions outside the value chain (carbon credits, new removal technologies) 5. Initiatives to deepen collaboration with society 6. Q&A / Business card exchange

[Instructor] Yuichiro Kabushiki, Partner Lawyer at TMI Comprehensive Law Office [Key Lecture Content] With the spread of AI, there is growing attention on the civil liability of developers, providers, and users of AI. The Ministry of Economy, Trade and Industry will publish "Guidelines on the Interpretation and Application of Civil Liability in AI Utilization" in April 2026, and the Ministry of Justice will also establish an expert meeting to examine civil liability related to unauthorized use of images and voices generated by AI in the same month. As the full enforcement of the AI Promotion Act and the revision of AI guidelines are underway, it is necessary to design and operate governance based on the potential responsibilities that may arise retrospectively. In this seminar, based on the guidelines from the Ministry of Economy, Trade and Industry and drawing on litigation practice experience as a judge and lawyer, we will organize the basic framework for assessing civil liability and explain fundamental methods for designing and operating governance based on risk analysis. Furthermore, we will examine the framework for civil liability and the design and operation of governance using hypothetical cases that are likely to pose practical issues.

In this seminar, we will welcome Mr. Satoru Hayami from Waseda University, who will explain the latest trends in AI utilization in manufacturing, as well as the evolution of technologies such as agent-based AI and physical AI, and the opportunities and key points for practical application in the manufacturing industry. Furthermore, Mr. Tsubasa Shibata, representative of Next Opt, will introduce processes aimed at practical implementation, incorporating actual case studies from manufacturing sites. We hope you will envision the "potential for AI utilization in your company" and take home hints that will lead to improvements in your operations starting tomorrow. We look forward to your participation.