MD&M 2026 in Anaheim February 3 – 5, 2026

R37 type liquid R37_0002A! The rubber parts are mainly made of EPDM.

This is a small DC diaphragm pump with low noise and low pulsation. It features low noise, low pulsation, compact size, lightweight, and self-priming. Rubber components are mainly made of EPDM. It is used in various applications. 【Specifications】 ■ Material: Resin, rubber, assembled products ■ Lot: 1,000 to 10,000 units ■ Industries: Automotive (mass production), low voltage & home appliances, medical devices, beverage dispensers *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Achieving the transportation of large volumes of gas compared to our conventional pumps.

Achieve the transportation of large volumes of gas compared to our conventional pumps! In a three-cylinder structure compared to a single-cylinder structure: - The cycles of suction, compression, and discharge are evenly distributed, reducing pulsation. (Low pulsation) - Operating noise is also minimized. (Quiet operation) 【Specifications】 - Material: Resin, rubber, assembled products - Lot: 1,000 to 10,000 units - Industries: Automotive (mass production), low voltage & home appliances, medical devices, beverage dispensers *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

For liquids with a flow rate of 3.0L/min or more, and 3.7L/min or more! No shaft seal is required, eliminating concerns about liquid leakage.

The small DC centrifugal pump (micro pump) with a magnetic coupling system can be operated from a distance using magnetic power, allowing for the use of high-temperature water. It is a pump that utilizes centrifugal force. It adopts a method where the impeller in the water passage is rotated by the power of magnets. Since the water passage and the motor are separated, there is no need for a shaft seal, eliminating concerns about liquid leakage. Additionally, we offer a separable type that does not require drilling holes in the tank and is easy to maintain. 【Features】 ■ Operable from a distance using magnetic power ■ Can use high-temperature water, applying centrifugal force ■ Adopts a method where the impeller in the water passage is rotated by magnets ■ No need for a shaft seal, eliminating concerns about liquid leakage ■ Easy-to-maintain separable type also available *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

By eliminating the axis part, it maintains a consistently clean discharge! It complies with food sanitation laws.

The small DC centrifugal pump (micro pump) for liquids complies with the Food Sanitation Act. By optimizing the casing structure, we have achieved a compact, lightweight, and low-cost design. Utilizing a magnetic coupling method, this product eliminates the shaft component, ensuring a consistently clean discharge. 【Features】 ■ Complies with the Food Sanitation Act ■ Achieves compactness, lightweight, and low cost through optimized casing structure ■ Adopts a magnetic coupling method using magnetic force ■ Maintains a consistently clean discharge by eliminating the shaft component *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

Developing pumps in-house! We respond to various requests with high customization capabilities!

Our company develops its own pumps. The "Diaphragm Pump" is a compact small DC pump weighing 63g. Thanks to its robust design, it features a compact body with low power consumption while providing high pressure and flow rate. Additionally, it is self-priming and does not require a specific installation location. Furthermore, through the use of fluid analysis technology in its internal structure design, we have successfully achieved even lower noise levels while maintaining high efficiency. We are committed to our unique resin molding technology, which realizes excellent cost performance and weight reduction. 【Features】 ■ High vacuum, high pressure ■ Low noise ■ Low cost ■ Widely applicable for gases and liquids ■ Compact size (63g) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube