[Report] Dairy and Dairy Product Analysis Equipment Open House and Seminar (Tokyo, Fukuoka)

Technical specifications are also included! High-precision analysis results can be obtained even in the measurement of various dairy products.

This document introduces the FT-IR dairy component analysis device "Milkoscan FT3," which can measure a variety of dairy products all at once. It includes features such as an automatic standardization function (patented), a double syringe system that enables continuous multi-subsampling measurements up to 40 times, and technical specifications. The device provides next-generation dairy component analysis for all scenarios, from raw milk quality inspection and dairy component standardization to process control and final product quality management. [Contents (excerpt)] - Automatic standardization function (patented) - Excellent calibration curve transfer performance - Double syringe system enabling continuous multi-subsampling measurements up to 40 times - Dedicated software compatible with Japanese - Technical specifications *For more details, please refer to the PDF document or feel free to contact us.

• Food Testing/Analysis/Measuring Equipment

Equipped with various newly developed technologies in a compact package!

The "MilkoScan Mars" is an FT-IR (Fourier Transform Infrared) type milk component measurement device designed for raw milk and drinking milk. It can measure up to six components in about one minute. Additionally, by adopting a flow system that eliminates the need for a homogenizer and incorporating an automatic standardization function, it significantly reduces equipment maintenance costs. Furthermore, it is equipped with an abnormal milk screening function that can be applied to foreign matter contamination testing, achieving excellent levels of measurement accuracy, running costs, and functionality. 【Features】 ■ Equipped with FT-IR (Fourier Transform Infrared) measurement mechanism ■ Standard milk calibration curve included ■ Maintenance costs significantly reduced by newly developed flow system ■ Automatic standardization performed upon device startup, allowing for equipment management with minimal calibration management ■ Automatic zeroing/automatic cleaning functions included *For more details, please refer to the PDF materials or feel free to contact us.

• Food Testing/Analysis/Measuring Equipment

Simultaneous measurement of bacterial count and somatic cell count! Measurement is possible even with low-temperature samples due to the built-in heater.

"Baksomatic" is a raw milk testing solution that can be used for hygienic milk quality testing at raw milk reception sites and raw milk inspection facilities. It can be used for monitoring mastitis and hygiene management at the producer level, as well as for the acceptance testing of raw milk at dairy factories. It is capable of continuously suctioning and measuring four samples in succession. With excellent performance, operability, and safety, it can simultaneously measure low levels of bacterial counts and somatic cell counts with high precision. 【Features】 ■ Simultaneous measurement of bacterial counts and somatic cell counts ■ Equipped with flow cytometry measurement mechanism ■ Measurement of total bacterial count in raw milk (IBC) within 9 minutes ■ Measurement of somatic cell count within 2.5 minutes ■ Space-saving compact design *For more details, please refer to the PDF materials or feel free to contact us.

• Food Testing/Analysis/Measuring Equipment

Advanced measurement performance and ease of use, network performance. The ideal form of near-infrared analyzers.

The "NIRS DS3" is an innovative NIR analysis solution that evolves the globally popular "NIRS DS2500," pursuing business improvements through the utilization of measurement data and adding new features. It contributes to the efficiency of manufacturing and quality control through a diverse range of application packages that cater to the food and feed sectors, from unground grains and feed to powdered samples and liquid samples like edible oils. Additionally, we offer models with different measurement wavelength ranges, such as the "NIRS DS3F," while maintaining the basic performance, as well as the "NIRS DS3 A" auto-sampler capable of continuous measurement of up to 20 samples. 【Features】 ■ Standardized equipment ■ Smart start ■ Lamp guard ■ Dustproof and waterproof cabinet (IP65) ■ Auto-sampler: capable of continuous measurement of 20 samples *For more details, please download the PDF or feel free to contact us.

• Analytical Equipment and Devices

No reagents needed, safe and easy measurement for anyone! Achieving outstanding measurement accuracy.

The "Food Scan 2 Daily Analyzer" is a near-infrared component measurement device designed for butter, cheese, and fermented products such as yogurt. Equipped with a unique measurement mechanism developed to achieve optimal performance in dairy product measurement, it features the ANN Global calibration curve, which provides exceptional stability and outstanding measurement accuracy. It streamlines operations in quality control tasks for final products, achieving significant cost reduction and improved economic efficiency in dairy manufacturing at an excellent level. 【Features】 ■ High-precision measurement using transmission-type near-infrared analysis ■ Fast measurement (15 seconds) ■ Equipped with global calibration curves for each dairy product, eliminating the need for calibration curve development ■ Extensive scanning area (approximately 50% of the sample area) ■ Simultaneous measurement of color tone using a color module *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

For quality evaluation of wheat, rice, and various grains! Measurement can be done without preprocessing the grains in their whole form.

The "InfraTech NOVA Grain Analyzer" accurately measures various components of unground grains using transmission near-infrared spectroscopy. By utilizing a low wavelength range of 400-1100nm, including the visible light region, it employs high-energy near-infrared light for measurements. The near-infrared light irradiated on the grain sample penetrates the seed coat, allowing it to collect spectral information from inside the grain rather than just the outer skin or surface, enabling more accurate measurement values. 【Features】 ■ Can measure grains without preprocessing them ■ Simple operation with just a push of a measurement button ■ No chemical reagents used ■ Simultaneous measurement of multiple components in a single test ■ Can measure high moisture samples (such as raw barley) ■ Rapid measurement in just 30 seconds ■ Ministry of Agriculture, Forestry and Fisheries certification: protein, moisture, and bulk density for polished and brown rice * Certification for bulk density of brown rice was obtained as of April 1, 2022! * For more details, please refer to the PDF document or feel free to contact us.

• Food Testing/Analysis/Measuring Equipment

With the current processing methods and technologies, it is difficult to create complex shapes, integrated structures, lattice/honeycomb structures, porous structures, hollow structures, hybrid structures, and direct manufacturing from 3D data. Furthermore, through topology optimization and collaboration with generative design, we can achieve the creation of innovative aluminum parts that are not available from conventional or other companies, rapid development and prototyping of parts, dramatic reduction in the number of parts, ultra-lightweight and compact designs, cost reduction, and significant decreases in the number of processes and personnel involved. In this seminar, leading users such as J·3D, ODEC, and pioneers in white copper, who have achieved remarkable results in aluminum part manufacturing using metal 3D printers, will discuss key points and precautions for implementation and utilization, various manufacturing methods and technologies, rapid, low-cost, high-quality manufacturing techniques, uniquely developed next-generation AM technologies, groundbreaking case studies that significantly differentiate from other companies' parts, as well as factors for failure and secrets to success. Based on numerous research results and rich manufacturing achievements, we will provide a clear and concrete explanation for those considering implementation, beginners with interest, and those who have just started in the field. [Currently, half-price tuition] When applying, please write "Other [8,500 yen]" in the "Other" section above the application form on our website.

Connectors exist in very large numbers in the world. It is very difficult for customers to find connectors that match their specific applications from among them. The "Product Finder" on the ODU website serves as a tool to help find the right connector products. You can search for the optimal connector from various approaches, such as matching it to your cable, electrical specifications, waterproofing, etc. The connectors you search for will provide information on electrical specifications, durability, and also CAD data. In the online seminar, we will introduce how easy and quick it is to search for connectors using the "Product Finder" in a live format. ------------ Date and Time: November 19, 2026 (Thursday) 14:00 - 14:35 Venue: Online (A URL for the venue will be sent via email after you register) Speakers: Miho Kato, Sales Department, Kamex ONE Co., Ltd. Masaru Kimura, Sales Manager, ODU Japan Co., Ltd. ------------

KAI Group will be exhibiting at the "Advanced Materials Technology Exhibition 2026" held at Tokyo Big Sight. This exhibition widely introduces advanced materials and technologies in the industrial sector, covering everything from materials to their processing. It provides an essential venue for business discussions that are crucial for the development of new technologies and products in advanced fields. We plan to showcase industrial blades, cutters, and scissors with exceptional sharpness, leveraging the technology we have cultivated through our razor products. We sincerely look forward to your visit.

We will be exhibiting products that have undergone surface treatment through thermal spraying. Specifically, we will showcase products that have been ceramic thermally sprayed on metal rolls and aluminum alloy products that have undergone hard surface treatment. We provide a comprehensive service for thermal spraying repairs of parts that have lost thickness due to wear, surface modification of metal components, and other related machining processes. Exhibition Dates: November 11 (Wednesday) to 13 (Friday), 2026 - 3 days Opening Hours: 10:00 AM to 5:00 PM Venue: Tokyo Big Sight, East Hall 2

Kinoshita Corporation will exhibit at "N-Plus 2026," held at Tokyo Big Sight from November 11 (Wednesday) to 13 (Friday), as a member of the Japan Nonwoven Fabric Association's joint pavilion. In this exhibition, we will introduce a wide range of products, including the water-soluble and biodegradable nonwoven fabric "Haibios," themed "Returning to Paper," as well as the pulp nonwoven fabric "Kinari-to," which can be thermoformed. Additionally, we will have a mini sound absorption experience corner where you can actually test the differences in sound using our pulp-based sound-absorbing material "Otocell." We will showcase the various possibilities of our airlaid nonwoven fabrics through actual product displays and demonstrations. Please come and see our products and samples at the venue.