Notice of Participation in the Ceramics Product Exhibition - "10th High-Performance Ceramics Exhibition [Tokyo]" from Wednesday, November 12 to Friday, November 14, 2025.

Microporous ceramics: Capable of producing pores with a minimum diameter of φ0.02mm. New possibilities opened up by pilot microporous ceramics.

For pores with a diameter of less than 1mm, it is generally considered difficult to create deep holes of 10mm or more using drilling or laser processing. Our company can manufacture deep holes of over 100mm with an inner diameter of φ0.02mm using high-precision extrusion molding. The inner diameter dimension tolerance is ±5%, and due to the extrusion molding process, the variation within the same lot is small. We can also create through holes with combinations of different shapes and hole diameters, allowing for structures with freely adjustable wall thicknesses from thin to thick. The materials used are high-purity alumina, zirconia, and aluminum nitride. 【Features】 ■ Capable of producing holes from φ0.02mm to a length of 100mm using our unique technology ■ Can produce deep holes with freely adjustable wall thicknesses from thin to thick *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Ceramics

Pilot, a comprehensive writing instrument manufacturer, can produce fine holes and multi-porous through-holes with an outer diameter of φ0.2 to φ8, an inner diameter of φ0.005 and a length of approximately 120mm.

Our company specializes in the manufacturing of ceramics with fine through-holes, utilizing the extrusion molding technology developed through the production of mechanical pencil leads. We focus on fine shapes and high precision, capable of producing outer and inner diameter tolerances with a dimensional accuracy of ±5%. If you require the characteristics of ceramics, such as wear resistance, chemical resistance, heat resistance, insulation, and chemical stability in production equipment, tools, or product design, and are considering fine or micro-hole shapes or long materials, please feel free to consult us.

• Ceramics

Can be utilized in processes that require wear resistance, insulation, and corrosion resistance. Achieves a small diameter of 0.5 to 2.0 mm.

Our company utilizes the technology cultivated in the manufacturing of mechanical pencil leads to produce fine, long-shaped ceramic products called "Zirconia Rods." Until now, we have offered these as original products, but in response to numerous requests, we have added standard products to our lineup. You can choose from four types with diameters ranging from 0.5 to 2.0 mm (in 0.5 mm increments). These are ideal for processes where "the use of metals is not suitable," such as those requiring wear resistance and insulation. They can also be used as materials for manufacturing components of precision equipment that are becoming smaller. 【Features】 ■ Capable of producing high-density molded bodies through our unique kneading, extrusion molding, and firing technology ■ Provides a smooth surface with an Ra of approximately 0.2 due to extrusion molding ■ Short lead times are possible because of domestic manufacturing ■ Sold stored in a dedicated slide tray that is easy to retrieve and has excellent preservation properties *For more details, please download the materials or feel free to contact us.

• Ceramics

High-precision processing with ±1μm accuracy supports a variety of parts and materials such as discharge guides and positioning pins.

In recent years, there has been a trend towards miniaturization of products, leading to a demand for precision processing of small components. Do you have any concerns regarding this? Our company, "Secondary Process Products," performs secondary processing on high-density, high-strength, and high-purity fan ceramics with sub-micron precision machining. We also accommodate high-precision surface finishing and the assembly of sleeves and parts with special hole diameters. 【Features】 - Capable of producing small diameters of less than 1mm with an aspect ratio of over 200. - Fine and high aspect ratio holes that penetrate in the extrusion direction. - Can be manufactured with a freely adjustable wall thickness, from thin to thick. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Processing Contract

For controlling the flow rate of gases and liquids. Achieving stable flow and reduced pressure loss.

The pilot's "porous ceramics" can create numerous through-holes for extrusion molding. It is possible to mold thin ceramics with a minimum outer diameter of φ0.3 mm, fine-pore ceramics with a minimum pore diameter of φ0.02 mm, and through porous ceramics with over 100,000 holes. These are used in fields such as analysis, automotive, and semiconductors. 【Features】 ■ Even for pores with a diameter of less than 1 mm, it is possible to produce items with an aspect ratio of over 200. ■ High aspect ratio holes are penetrated in the extrusion direction. ■ Since the holes are straight and pass through a dense body, stable flow rates can be achieved. *For more details, please refer to the product catalog available for PDF download. Feel free to contact us with any inquiries.

• Ceramics

It is possible to manufacture small-diameter rods and fine-pore pipe shapes.

Generally, there are many flat or sheet-like products, but are there any parts that require rod or pipe shapes? Our "Aluminum Nitride" utilizes the extrusion molding technology of mechanical pencil leads and can be produced in aspect ratios of 200 or more. "Aluminum Nitride" possesses an extremely high thermal conductivity among ceramics and is an excellent material for electrical insulation and thermal radiation. The available sizes can be manufactured in an outer diameter of φ0.5 to φ6.0, an inner diameter of φ0.02 to φ4.0, and a length of 100mm. [Features] ■ For parts requiring heat dissipation ■ Superior thermal conductivity compared to alumina and zirconia ■ Capable of forming small-diameter pipes with fine pores *For more details, please refer to the materials. Feel free to contact us as well.

• Ceramics

We will be exhibiting at the "43rd Nano Testing Symposium (NANOTS2023)" held at the Senri Life Science Center in Toyonaka City, Osaka Prefecture! We will be introducing our latest analytical technology services, so please stop by! We sincerely look forward to your visit.

We will be exhibiting at JAPAN PACK 2025 (Japan Packaging Industry Exhibition)! Please be sure to visit us. [Exhibited Products] Pineapple suction project Live demonstration of a collaborative robot hand 5kg dual-sided gripper Comparison of compressed air ejectors with other companies 【Gripper Sale】 We will be selling the following two products at a discounted price at our booth. Please inquire about the special price at the venue. ■ 'KENOS Gripper KVGL.400.100, N214.FR6.S2' URL: https://www.youtube.com/watch?v=HsNRwrDtjW0 ■ 'Collaborative Robot Hand KCS.Q110.N301.110.FR6.SX422.V1.X.X' URL: https://www.youtube.com/watch?v=GFKg3blZzdQ These products are ideal not only for actual applications but also for use as test machines. How about taking this opportunity?

"We want to digitize paper documents within the company, but we don't know which service to choose" and "We can't keep up with the changes in the Electronic Bookkeeping Law and the legal revisions in the construction and manufacturing industries." For those individuals, we have an announcement. The electronic contract and document management service, paperlogic, will be exhibiting at the event 'Serious DX & AI Strategy 2025' held on October 15 (Wednesday) at Sogo Yokohama. This time, there will also be a seminar led by our representative, certified public accountant and tax accountant Koichi Yokoyama. We will also be conducting product demonstrations at the exhibition, so please come and visit us. ● Our representative, Yokoyama, will also give a lecture! Luxurious Seminar At 'Serious DX & AI Strategy 2025', Koichi Yokoyama, the representative of Paperlogic Inc., will be speaking in [Seminar B Course]. On that day, he will introduce key points of laws including the revised Construction Industry Law, which will be enforced by December 2025, and related document management, from the perspective of a certified public accountant and tax accountant. Additionally, there will be seminars that are useful for utilizing AI and DX. For more details, please check the event website.

We will be exhibiting at the 20th Towa Shinseikai "Business Networking Event" to be held on Wednesday, November 5, 2025. We look forward to your visit. Please be sure to stop by our booth when you attend.

This time, Pilot Corporation will be exhibiting at the "10th Advanced Ceramics Exhibition [Tokyo]" held at Makuhari Messe. We will manufacture precision ceramics rods and pipes with an outer diameter of φ8 or less and an inner diameter of φ0.02 based on customer drawings, utilizing the extrusion molding technology developed with our sharp cores. The materials used will be high-purity alumina, zirconia, and aluminum nitride. We will display a large number of actual samples in various sizes and shapes. We look forward to welcoming you with a complete setup, and we kindly ask for your visit.