We will exhibit at the EcoPro 2025 exhibition.

Utilizing existing molding equipment, biodegradable plastic, high moldability, inflation molding, calcium carbonate-based, samples available from 25kg.

This is a biodegradable plastic compounded with PBAT and based on calcium carbonate. It can mainly be used for inflation molding. You can use your existing molding equipment as is, so no new capital investment is required. With proper disposal after use, it is harmless and biodegradable. It can contribute to decarbonization by replacing existing petroleum-based plastics. Sample materials for testing are available from 25 kg. We offer a lineup that complies with biodegradable certifications such as DIN, ASTM, and ISO. Customization is also possible according to your needs.

• plastic

Utilize existing molding equipment as is. Biodegradable plastic with high moldability. Injection molding, PLA-based. Samples available from 25 kg.

This is a biodegradable plastic compounded with materials such as PBAT based on PLA. It can mainly be used for injection molding. You can use your existing molding equipment as is, so no new capital investment is required. With proper post-use disposal, it is harmless and biodegradable. It can contribute to decarbonization by replacing existing petroleum-based plastics. Sample materials for testing are available starting from 25kg. We offer a lineup that complies with biodegradable certifications such as DIN, ASTM, and ISO. Customization is also possible according to your needs.

• plastic

Utilize existing molding equipment as is. Biomass plastic with high moldability, such as injection molding, PP-based. Samples available from 25 kg.

This is a biomass plastic compounded with starch and based on PP. It can be used for injection molding, extrusion molding, and blow molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 60%. By replacing existing petroleum-based plastics, it contributes to decarbonization. Sample materials for testing are available starting from 25 kg. There are grades that have obtained the biomass mark from JORA (Japan Organic Resources Association). There are also grades that comply with the Ministry of Health, Labour and Welfare's No. 370 test. Customization is possible according to your needs.

• plastic

Utilize existing molding equipment as is Biomass plastic High moldability Inflation molding PE-based Samples available from 25kg

This is a biomass plastic compounded with starch based on PE. It can mainly be used for inflation molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 20%. It can contribute to decarbonization by replacing existing petroleum-derived plastics. We provide sample materials for testing starting from 25 kg. Customization is also possible according to your needs.

• plastic

Utilize existing molding equipment as is Biomass plastic High moldability Injection molding PA-based Samples available from 25kg

This is a biomass plastic compounded with starch and based on PA. It can mainly be used for injection molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 30%. By replacing existing petroleum-based plastics, it contributes to decarbonization. We provide trial samples starting from 25 kg. Customization is also possible according to your needs.

• plastic

Utilize existing molding equipment as is Biomass plastic High moldability Injection molding PC-based Samples available from 25kg

This is a biomass plastic compounded with shell powder based on PC. It can mainly be used for injection molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 16%. It can contribute to decarbonization by replacing existing petroleum-based plastics. We provide trial samples starting from 25 kg. Customization is also possible according to your needs.

• plastic

Utilize existing molding equipment as is Biomass plastic High moldability Injection molding ABS-based Samples available from 25kg

This is a biomass plastic compounded with shell powder and PLA based on ABS. It can mainly be used for injection molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 30%. By replacing existing petroleum-based plastics, it contributes to decarbonization. Sample materials for testing are available starting from 25 kg. There are grades that have obtained the biomass mark from JORA (Japan Organic Resources Association). There are also grades that comply with the Ministry of Health, Labour and Welfare's No. 370 test. Customization is possible according to your needs.

• plastic

Utilize existing molding equipment as is Biomass plastic High moldability Injection molding HIPS-based Samples available from 25kg

This is a biomass plastic compounded with shell powder and PLA, based on HIPS. It can mainly be used for injection molding. You can use your existing molding equipment as is, so no new capital investment is required. Coloring is also possible. It achieves a biomass content of up to 30%. By replacing existing petroleum-derived plastics, it contributes to decarbonization. Sample materials for testing are available starting from 25 kg. There are grades that have obtained the biomass mark from JORA (Japan Organic Resources Association). There are also grades that comply with the Ministry of Health, Labour and Welfare's No. 370 test. Customization is possible according to your requests.

• plastic

Utilize existing molding equipment as is Biodegradable plastic High moldability Inflation molding PBAT-based Samples available from 25kg

This is a biodegradable plastic compounded with PLA and other materials based on PBAT. It can mainly be used for inflation molding. You can use your existing molding equipment as is, so no new capital investment is required. With proper post-use disposal, it is harmless and biodegradable. It can contribute to decarbonization by replacing existing petroleum-based plastics. Sample for testing is available from 25 kg. We have a lineup that complies with biodegradable certifications such as DIN, ASTM, and ISO. Customization is also possible according to your needs.

• plastic

We will be exhibiting at the "12th Conference of the Advanced Power Semiconductor Subcommittee" held at the Toyama International Conference Center. We will be introducing our latest analysis technology services, so please stop by! We sincerely look forward to your visit.

Our company will exhibit at the Measurement and Measurement Comprehensive Technology Exhibition in Hokuriku, showcasing safety products with Gemba Reporter. Please be sure to stop by booth number "72" when you visit. 【Date and Time】 November 6, 2025 (Thursday) 9:00 AM - 5:00 PM 【Venue】 Ishikawa Industrial Exhibition Hall, Building 2 From JR Kanazawa Station, take the Hokutetsu Bus bound for "Shimo-Yasuhara" and get off at "Fukurobatake Town West Green Park," then walk for 5 minutes. Alternatively, take the Hokutetsu Bus bound for "Saiseikai Hospital," get off at "Seibu Green Park," and it will take about 15 minutes by taxi. 【Materials】 https://www.line.co.jp/wp-content/uploads/2025/10/MepTechhokuriku2025.pdf 【Notes】 Please register in advance using the 2D barcode in the PDF.

Sekiguchi Iron Works Co., Ltd. will exhibit at the "Environmental Industry Expo 2025" held at S-Bird in Iida City, Nagano Prefecture. This exhibition aims to pave the way for a sustainable future from the local community. It is a trade fair for environmental-related industries originating from the Minami-Shinshu region of Nagano Prefecture. Our company will introduce next-generation solutions for reducing environmental impact and effectively utilizing energy, including our "smokeless small incinerator" and "stove," along with product panels and case studies. No pre-registration is required, and admission is free. We sincerely look forward to your visit.

Recently, fine bubbles, which are tiny bubbles smaller than 100 μm and are referred to as "fine bubbles," have attracted attention in various fields such as the environment, agriculture, food, fisheries, and medicine, due to their ability to impart various functions to liquids. Fine bubbles are classified into two types based on their size: microbubbles and ultrafine bubbles. Recently, there has been a growing interest in ultrafine bubbles, which have a lifespan of several weeks to months. However, listening to the voices of researchers and users reveals some skepticism, which has become one of the issues hindering the spread of fine bubble technology. On the other hand, we have challenged the elucidation of the stabilization mechanism of ultrafine bubbles from a new perspective by enabling the control of number density exceeding 10 billion particles/mL without pressure or concentration operations using our ultrafine bubble generation technology. In this seminar, we will provide a fundamental explanation of fine bubble technology, including the basic physical properties, characteristics and functions, device technology, measurement and evaluation methods, and case studies, to promote research and utilization of fine bubbles based on a correct understanding.

Sekiguchi Iron Works Co., Ltd. will exhibit at the "Minami-Shinshu Environmental Messe 2025" held at S-Bird in Iida City, Nagano Prefecture. This exhibition will be held simultaneously with the "Environmental Industry Trade Fair" taking place the day before. It will be held over the weekend, with many family-friendly events planned. We encourage those who usually find it difficult to visit to take this opportunity to come. Our product exhibition area is located about 10 minutes from the venue. We sincerely look forward to your visit.