Exhibited at BioJapan 2025.

Alternative methods to animal testing: Pyrogenic substance testing (compatible with endotoxin and non-endotoxin testing)

Monocyte activation test kit, an alternative method to the rabbit pyrogen test and LAL test. It uses human monocytic THP-1 cells to detect the inflammatory cytokine TNF-α. Capable of detecting gram-negative bacteria, gram-positive bacteria, fungi, and viruses.

• Other analytical and testing equipment

Using neurons as bio-digital sensors. Toxicity prediction using a digital library. High-throughput device using MEA.

Microchannel technology enables compartmentalization and co-culture. Compatibility with other companies' MEAs allows for the recording of electrical activity. Determination of toxicity and efficacy through the creation of digital signatures of compounds tested on innervated target organs. Prediction of toxicity and efficacy by comparing digital signatures of compounds using a digital library.

• Culture vessel

A biomimetic system that tests by moving cultivated mini-organs.

Mechanical stimulation of cultured tissues such as 3D cardiac microtissues using actuators to mimic heartbeats and knee joint movements. Evaluation of changes in electrical activity after drug administration allows for in vitro safety assessment of drugs. *Measurement of heart rate, electrical activity, contractility, etc.

• Cell culture contract service

Aseptic sampling system with adapter

The disposable sampling port cartridge eliminates the need for time-consuming assembly of multi-port adapters. This allows for direct attachment to the container's port, creating a simple, fast, and immediately usable sampling system. It is a gamma-irradiated disposable system for aseptic liquid sampling at various stages of pharmaceutical and biopharmaceutical processing. These systems minimize the potential for false positives compared to traditional sampling systems and reduce the need for cleaning. A sealed system that maximizes operator safety and eliminates contamination. A simpler, faster, and completely disposable ready-to-use solution for sampling applications. There is no need for the cumbersome and time-consuming assembly of sampling system ports and multi-port adapters within the cartridge.

• Animal cells

Reliable single-use bags required for sterile processes such as storage and transportation of media, intermediates, buffers, etc., used in biopharmaceuticals.

AsptiBag Gold uses an inactive multilayer polyethylene film that is physically robust and inert to many chemicals and solvents, while also possessing excellent gas barrier properties. The contact surface is made of 130μm ultra-low-density polyethylene without any additives. It meets various regulatory and functional requirements, providing consistently high-quality products.

• Other bio-related products

FEP-made cell culture bags. Manufactured by TECHNOFLEX (France). Compliant with USP Class 6. DMF registered.

The SafeCell series is made of fluorinated ethylene propylene (FEP) and meets the demands of in vitro cell culture. FEP is chemically and biologically inert, making it perfectly suitable for cell suspension culture. Its anti-adhesion properties allow cells to freely float and proliferate in the medium. SafeCell bags are permeable to gases (oxygen, carbon dioxide, nitrogen), enabling the necessary exchanges for proper cell development, while also possessing another important characteristic: water impermeability. The low evaporation rate of SafeCell bags prevents issues even in humid incubators that increase the risk of bacterial and microbial growth.

• Culture vessel

To reduce contamination risks and streamline the cleaning process.

Single-use assembly tubes for biopharmaceuticals. Tube material, length, connector type, filters, etc. can be customized according to customer requirements. Manufactured in a Class 7 cleanroom. The facility is ISO 13485 and FDA certified. Compatible with gamma sterilization, with various certificates included.

• Filtration Filter

No need for centrifugation‼ Cultivation filtration depth filter

The combination of deep filtration and alluvial filtration allows for the removal of CHO cells, bacteria, etc., in a single step without the need for a centrifugation step. This reduces the cost and downtime of the bioprocess.

• Protein Extraction Kit

Sterilization applications for biopharmaceuticals and sterile preparations! Filters with high microbial retention, low protein adsorption, and extremely low elution performance.

Advanced Microdevices' sterilizing capsule filter achieves improved throughput through a pre-filter and high flow rates due to low hold-up volume. 【Features】 ■ Improved recovery rate due to low protein adsorption ■ Assurance of microbial capture performance through bacteria challenge testing ■ 100% integrity testing conducted ■ Certificate provided with each filter ■ Compatible with ethylene oxide and autoclave sterilization ■ Gamma radiation sterilization compatible

• Other bio-related products

Various lineups are prepared based on flow rate, effective surface area, and sterilization methods.

Consistent product quality using a quality management system Establishment of product traceability through lot number management Validation support through integrity tests, extractables, leachables, adsorption, and testing Compliance with various regulations such as FDA and USP Autoclave, steam sterilization Sterilization varies by each filter For details, please contact us

• Filtration Filter

Cell observation in the incubator.

▶ Compact design that fits multiple units in an incubator (height 105mm) ▶ Visualization of cellular changes through time-lapse photography ▶ Graphical display of cell count and cell area ▶ Compatible with 24-well plates, with individual imaging for each well <Features> - Equipped with 24 cameras in a compact housing - Focus and exposure can be set individually for each well - Compatible with commercially available 24-well plates - Individual display of imaging results for each well

• Other Culture

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube