Behind the Scenes of Gentle Flow by Daniel Cole

Pulsation Reduction Gentle Flow Diaphragm Liquid Pump

- The pulsation reduction feature allows for the transfer of liquids with minimal pulsation. - Due to the reduced pulsation, pressure loss in the tubing can be minimized. - It enables the transfer of liquids with fewer air bubbles. - It can reduce the optional parts for pulsation reduction measures. - Equipped with a newly developed valve, it can achieve self-priming suction even at lower motor speeds. - Flow rate adjustment is possible through brushless motor control. - Materials with NFS certification are also available. Basic flow rate: 700 ml/min Diaphragm material: EPDM / PTFE

• Other pumps

Pulsation-reducing liquid pump, a high-output diaphragm liquid pump that significantly reduces pulsation generated during pump suction and discharge. Exhibiting at JASIS 2025.

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. It features a high discharge specification. - FP1.7 Series / FP1.25 Series We have integrated the pulsation reduction damper with the pump. Two types are available: brushed DC motors and brushless DC motors. The brushless DC motor also allows for digital customization. We will be exhibiting at JASIS 2025, one of Asia's largest cutting-edge science and analysis systems & solutions exhibitions, where manufacturers of analytical and scientific instruments gather. Please visit our booth. We look forward to seeing you there. ■ Exhibition Name: JASIS 2025 ■ Date: September 3 (Wed) - 5 (Fri), 2025 (3 days) ■ Venue: Makuhari Messe International Exhibition Hall and Conference Center ■ Participation Fee: Free (Pre-registration required) ■ Booth Number: 6B-703

• Other pumps

Pulsation-reducing liquid pump, a diaphragm liquid pump that significantly reduces pulsation generated during pump suction and discharge.

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Previously, pulsation reduction was achieved using dampers, but now the pump itself significantly suppresses pulsation. - FP7 Series / FP25 Series The pulsation reduction damper has been integrated with the pump. Two types are available: brushed DC motors and brushless DC motors. Digital customization is also possible with the brushless DC motor.

• Other pumps

Introduction to the mechanism of the low-pulse liquid pump FP400 series. You can see the five-diaphragm system and the movement of the valves.

Introduction to the FP400 series mechanism *The FP150 series has the same mechanism.

• Other pumps

Maintenance procedure video for low pulsation liquid pumps FP150 and FP400 series.

Maintenance can be performed by the users themselves using general-purpose tools.

• Other pumps

High-output type, pulsation control design diaphragm liquid pump, ideal for inkjet printers, high-pressure cleaning systems, etc., with corrosion-resistant components also available.

- High discharge design, maximum allowable discharge pressure 0.6 MPa - Reduced pulsation in liquid delivery - Long lifespan design - Excellent linearity - Self-sustaining - Transfer of sensitive liquids - Abundant wetted materials Significantly reduces pulsation using five diaphragms, controls flow rate with an external signal to a brushless DC motor, and demonstrates a linear flow curve based on the control signal. It offers extensive customization for users' technical challenges and various optional parts are available.

• Other pumps

Pulsation control design diaphragm liquid pump

- Reduced pulsation in liquid delivery - Long lifespan design - Excellent linearity - Self-sustaining - Transfer of sensitive liquids - Abundant wetted materials Basic flow rate: 1.5 l/min (KP) / 1.3 l/min (KT) Suction lift: 2.7 mH2O (KP) / 2.5 mH2O (KT) Discharge lift: 20 mH2O

• Other pumps

Pulsation-reducing liquid pump, a diaphragm liquid pump that significantly reduces pulsation generated during pump suction and discharge.

We have reviewed the design of the pump itself as a liquid pump for pulsation reduction measures. Traditionally, pulsation reduction was achieved using dampers, but we have significantly suppressed pulsation with the pump itself. - FP70 Series We have integrated the pulsation reduction damper with the pump. - FP150 / FP400 / FK1100 Series We have increased the number of diaphragms to a maximum of five, allowing for the cancellation of pulsation within the pump. - FP1.150 / FP1.400 / FK1.1100 Series We have increased the number of diaphragms to a maximum of five, allowing for the cancellation of pulsation within the pump. Additionally, we have improved the maximum allowable discharge pressure to 6 bar (0.6 MPa), achieving smooth liquid transfer even under challenging pressure conditions.

• Other pumps

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.