Free registration for attendance here" Decision to exhibit at the 40th Nepcon Japan! "January 21-23, 2026

Storage shelf for metal masks that can be connected one step at a time.

▶ This is a dedicated storage shelf for metal masks that can be stacked and connected. ▶ Dimensions of the target metal mask: 650×550×30 [mm] (customizable) ▶ Storage capacity: 13 pieces per shelf (a type with increased storage capacity is also available) ▶ It is easy to manage as it can be organized on the shelf, and the sliding mechanism makes retrieval effortless. ▶ The sliding dividers compress the gaps that were necessary for inserting fingers. If you would like a quote, please feel free to let us know.

• Printed Circuit Board
• Other mounting machines
• rack

Here are some good points about the product that we heard from customers who adopted it!

【Dedicated Shelf with Slide Function for Metal Masks】 We are currently sharing the positive feedback we've received from customers who have adopted our product, along with photos in our catalog data! 1. Working while wearing anti-static gloves 2. Wanting to compress the storage space for metal masks 3. Handling metal masks in a clean room 4. Frequent changes in the layout of the manufacturing line If any of these apply to you, please consider our products!

• Other mounting machines
• rack
• Other clean room equipment and facilities

Compressed storage with sliding dividers! A sturdy metal mask storage shelf!

▶ This is a storage shelf for metal masks with a frame. ▶ It can store 52 metal masks, each assumed to be 30mm thick and weighing approximately 4kg. ▶ The sliding dividers compress the gaps that were necessary for inserting fingers. ▶ The dimensions can be customized to fit your metal masks. ▶ We can also accept inquiries for custom external dimensions and the number of masks stored per unit. [Features] - Made of stainless steel, it is less likely to experience deterioration over time due to rust. - It is easy to move and set up with casters and adjusters.

• Printed Circuit Board
• Other processing machines
• Other mounting machines

Only the necessary features! Simple rack for metal masks.

▶ This is a storage shelf for metal masks with a focus on simplicity and a frame. ▶ Dimensions of the target metal mask: 650×550×30 [mm] (customizable) ▶ Storage capacity: 15 pieces per shelf (30 pieces per unit) ▶ It is easy to manage as it can be organized on the shelf, and the sliding mechanism makes retrieval effortless. ▶ The sliding dividers compress the gaps that were necessary for inserting fingers. ▶ It is also possible to adjust to the size of the customer's metal masks. [Features] - Made of stainless steel, it is less likely to suffer from durability degradation over time due to rust.

• Printed Circuit Board
• Other mounting machines
• rack

Achieve an easy-to-access and efficient storage shelf for metal masks with sliding dividers!

【Features】 ■ High storage efficiency - Can store 52 sheets of 650×550×30mm - Shelf bottom area is approximately 0.8m², saving space ■ Slide mechanism - The slide mechanism compresses the gap needed for retrieval, improving storage efficiency - A grip area is created, making retrieval very easy even while wearing safety gloves! ■ Attention to detail - Made primarily of stainless steel for clean usage - Equipped with casters for easy movement, allowing flexible adaptation to line construction - Customization options available for size and storage capacity, among other details

• Printed Circuit Board
• Other mounting machines
• rack

Which metal mask storage shelf is suitable? Three types to choose from based on storage capacity, installation space, and usage method.

In the storage of metal masks, the suitable storage shelf varies depending on the number of units to be stored, installation space, ease of access, and future expansion plans. Our company offers multiple metal mask storage shelves that utilize sliding dividers, allowing you to choose according to your needs. For example, if you want to implement a space-saving solution focused on essential functions, the "30-mask storage type" is ideal. If the number of masks to be stored is a priority, the "52-mask storage type" is more suitable. If you are considering future expansion or phased implementation, the "connectable type" is appropriate. All of these are stainless steel storage shelves designed for storing framed metal masks. The sliding dividers compress the gaps for finger access, balancing storage efficiency and ease of retrieval. Customization to fit the dimensions of the metal masks is also possible.

• Printed Circuit Board
• Other mounting machines
• rack

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall