We have added the '900nm bandpass filter (substrate: colored glass)' to our standard inventory.

A bandpass filter that achieves sharp rise and high transmittance in the visible light range (660nm). It is ideal for red laser diodes and LED applications.

Are you having trouble with something like this? - Is it possible to only allow a specific wavelength (633nm) to pass through? - I would like to expand the stop band because light other than the desired wavelength becomes noise. - Can you take into account the range of incident angles? - The shape is special; can it be shipped as a component? Optical bandpass filters are used in various optical applications and are essential for selectively extracting light of specific wavelengths. Passband: An optical bandpass filter allows a specific range of wavelengths to pass through. This range of wavelengths is called the passband and is typically defined by the center wavelength and the wavelength bandwidth. Wavelength selectivity: Optical bandpass filters can have very high wavelength selectivity, emphasizing light of specific wavelengths. This is important in many fields where precise wavelength selectivity is required. A 660nm bandpass filter, which selectively allows light in the specific wavelength range of 660nm to pass through, is commonly used in optical applications. This bandpass filter amplifies or allows light within the wavelength range around 660nm while blocking light of other wavelengths.

• Distance measuring device
• Image Processing Equipment
• Sensors

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only transmit specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can you create a film for that? - Since light other than the desired wavelength will cause noise, I would like to widen the stop band. - Given the range of incident angles, can this be taken into account? - Is it possible to mount this on AGVs or OHTs? The 905nm bandpass filter is a filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our proven results in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (such as TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Distance measuring device
• Image Processing Equipment
• Sensors

It is a filter designed to transmit light in two specific wavelength bands while blocking (preventing) other wavelength bands. It is ideal for surveillance cameras and similar applications.

1) Are you facing issues like this? ■ I want to pass visible light and part of the infrared wavelength (850nm), is that possible? ■ I definitely want to cut out the blocking range that causes noise. ■ Since there is a range of incident angles, can that be taken into account? ■ The shape is special, but can it be shipped as a part? 2) Dual-band pass filter (multi-band pass filter) This is a filter designed to transmit light in two specific wavelength bands while blocking (stopping) other wavelength bands. In addition to regular IR cut, it has the function to selectively transmit only specific near-infrared wavelengths (such as 850nm, 905nm, 940nm, 1064nm). For example, it is ideal for applications that require monitoring during both day and night by transmitting specific visible light and specific near-infrared light. With 40 years of experience, we have achieved sharp wavelength separation and high transmission rates. Our unique control technology during film formation allows for high durability and reduced shift.

• Other optical parts
• Surveillance Cameras
• Sensors

Over 500 successful projects and a rich lineup of film deposition processing. With 100 years of experience since our founding, we contribute to our customers' technological innovations through optical thin films and precision processing technologies.

Adachi New Industries does not simply perform film deposition. We aim to be a company that can provide comprehensive proposals, from thin film design to deposition processes and product shape processing, according to our customers' specifications. Do you have any of the following concerns? - Is it possible to change characteristics based on the performance of the light source or photodetector? - If characteristics change with angle, can simulations be performed? - I would like to see product characteristics with a small batch prototype first. - After starting mass production, can you provide efficient proposals? - Can you measure filters with unknown optical characteristics? 【Features】 ■ High transmittance and reflectance ■ Product stability ■ Film deposition on various substrates ■ Comprehensive coverage as a product ■ Small batch prototype support available (single item support possible) * For more details, please refer to the catalog or feel free to contact us.

• Other optical parts
• Sensors
• LED lighting

It is a dielectric multilayer film filter that transmits visible light and reflects near-infrared light.

It is used as a near-infrared cut filter that adversely affects CCD devices such as video cameras. The optical characteristics, such as the wavelength position with a transmittance of 50%, transmittance, and cut wavelength band, can be set arbitrarily. (Are you facing such challenges?) Is it possible to cut only the wavelength of near-infrared light? I want to allow visible light to pass while blocking IR wavelengths. I want to suppress light that causes noise and increase the sensitivity of the sensor. Can the wavelength range I want to transmit be custom adjusted? Is it possible to process it to chip size?

• Other optical parts
• Color camera
• Sensors

It is an optical filter that cuts ultraviolet and infrared light while having a high transmittance in the visible light range.

A UV-IR cut filter is a filter that cuts light in the ultraviolet and infrared regions while having a high transmission rate in the visible light region. In other words, it is an optical filter that simultaneously realizes the characteristics of both a UV cut filter and an IR cut filter. By placing it in front of CMOS sensors or CCD sensors, it serves multiple roles such as cutting noise light, providing heat protection against various light sources, and preventing degradation of liquid crystal components due to ultraviolet light. It is an excellent optical filter and optical thin film with multiple functions. Are you facing any of these issues? - Is it possible to cut both ultraviolet and near-infrared light? - Can a filter be made that allows visible light to pass while blocking IR and UV wavelengths? - I want to reduce noise light and increase sensor sensitivity. Can I consult about this? - Is it possible to customize the wavelength range that I want to transmit? - Is processing to chip size possible?

• Other optical parts
• Surveillance Cameras
• Sensors

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.