Introduction of the batch printing function! Announcement of the November WEB seminar.

Standalone type with high rigidity and quality, equipped with e-F@ctory utilization error prevention features, automatic router bit exchange, and image teaching capabilities.

The "MR2535H2" is a device that divides multiple small and complex-shaped circuit boards using a router method. It can cut printed circuit boards with low stress, thereby reducing the risk of damage to mounted components (such as multilayer ceramic capacitors) caused by stress in traditional hand-breaking or pressing methods. By utilizing automation and IT technologies cultivated at Mitsubishi Electric's Nagoya Works for equipment design and manufacturing, it supports improvements in factory productivity and quality. 【Features】 ■ Cuts unnecessary parts of complex-shaped printed circuit boards after mounting using a router bit ■ Improves setup efficiency by widening the opening width of the device's access door ■ Achieves space-saving by incorporating a dust collector within the device's lower section ■ Significantly enhances productivity by increasing the movement speed of the X-Y axis (three times faster than our conventional models) ■ Allows for setting the Z-axis position for each cutting point, enabling shorter takt times ■ Supports image teaching functions for setting cutting points on various types of circuit boards *For more details, please download the PDF or contact us.

• Circuit board processing machine

Improvement of productivity through parallel setup in the printed circuit board division process, also accommodating inline production processes!

By being able to prepare the next workpiece in parallel during substrate processing, we can eliminate waiting time during substrate exchanges. Additionally, by shortening the cycle time, productivity can be improved without increasing the number of operators. The entire process of supplying printed circuit boards, cutting the substrates, and palletizing the cut substrates onto discharge trays can also be automated. (Substrate cutting machine + robot transport system) 【Features】 ■ Equipped with a dual-table automatic turn system that allows for parallel setup ■ Adaptable to general inline specifications through the use of robots ■ Reduction of cutting time through Z-axis height settings for each router location ■ Improved operating rate by monitoring the usage distance of bits and automatically replacing them ■ Built-in dust collector for compact device size *For more details, please download the PDF or contact us. ★ For those interested in the single type, click here▽ https://mono.ipros.com/product/detail/2000569194 ★ Free seminar here▽ http://www.mtco-web.co.jp/products/web_seminar.html

• Printed Circuit Board
• Other processing machines
• Circuit board processing machine

【Monthly Web Seminars Now Held!】Automating the processes from PCB supply to PCB cutting, palletizing onto output trays, and PCB discharge!

The "PCB Cutting Machine Robot Transport System" can accommodate inline PCB cutting by connecting with the preceding and following processes. Additionally, it can handle batch processing by consisting of a magazine for loading PCBs and a magazine for storing the cut PCBs in trays. With the turntable PCB cutting machine (MR2535H2T) and a robot with a traveling axis, it contributes to reducing takt time, while also expanding the flexibility of the line layout and tray packing of printed circuit boards after cutting, thereby aiding in the automation and labor-saving of factory production. 【Features】 - The line configuration can flexibly adapt to factory layouts, including straight, U-shaped, and L-shaped arrangements. - The multi-joint robot allows for the discharge of cut PCBs, enabling the setting of PCB placement positions in the discharge tray, which is effective for PCB positioning in the next automation process. *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• Other processing machines
• Circuit board processing machine

Inline model that automates the printed circuit board cutting process.

Automatically cuts various printed circuit boards in-line on the manufacturing line. It eliminates the need to always have an operator at the board cutting machine, achieving labor savings. 【Features】 ■ Monitors the usage distance of the bit and automatically replaces it to improve operational efficiency. ■ Waste boards are automatically collected into a waste board box located at the bottom of the device. ■ Selecting a twin spindle enables simultaneous cutting, achieving high productivity. *For more details, please download the PDF or contact us.

• Printed Circuit Board
• Other processing machines
• Circuit board processing machine

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

Yazaki Energy System will be exhibiting at the "14th Agricultural WEEK (commonly known as J-AGRI)" held at Makuhari Messe. In response to challenges surrounding agriculture, such as record heat and soaring energy prices, our company proposes an agricultural system that utilizes surplus solar heat and waste heat from factories during the summer to support stable cultivation throughout the year, from winter heating to summer cooling. ■ Exhibition Details (Booth Number: 25-47) <Closed-type Agricultural House> Results from the second season and initiatives for the third season <Localized Cooling in Solar-Powered Agricultural Houses> Mechanism of substrate cooling, comparison of energy consumption with spatial cooling, growth conditions this summer <Cooling and Heating with Solar Heat> Examples of crown heating and house cooling, utilization of surplus heat in summer <Cooling of Crops and Workers with Well Water> Exhibition of a prototype well water cooler and proposals for the use of cooling jackets When you visit, please be sure to stop by our booth.

We would like to inform you about the autumn and winter internship opportunities for the 2028 graduates. 1. Open Company Dates: October 23, 2026 (Friday), November 11, 2026 (Wednesday), December 10, 2026 (Thursday), January 21, 2027 (Thursday) Time: 13:30 - 15:30 Location: Online (Microsoft Teams) 2. 1-Day Job Experience Dates: November 17, 2026 (Tuesday), December 16, 2026 (Wednesday) January 15, 2027 (Friday), January 27, 2027 (Wednesday), February 4, 2027 (Thursday), February 10, 2027 (Wednesday), February 18, 2027 (Thursday) Time: 10:00 - 17:30 (tentative) Location: Takaya Corporation Headquarters (661-1 Ibara-cho, Ibara City, Okayama Prefecture)

Notice of participation in the "FOOD Expo 2026." 【Date and Time】 　November 11 (Wednesday) - 13 (Friday), 2026 　Opening hours: 10:00 AM - 5:00 PM 【Venue】 　Tokyo Big Sight 　East Hall 2, Booth Number B-36 【Exhibits】 　Cardboard insulated boxes 　Craft cooler cubes 　Vacuum insulated panel 　Pallet cubes

[Lecture Topics] 1. Co-creation Strategy to Deliver AI to the Field - Business Development and Joint Ventures in the Era of Generative AI and Physical AI Mr. Haruto Suzuki, Industrial and Regional Research Department, Development Bank of Japan 1. The Mechanism of Generative AI and Its Current Utilization by Companies 2. Expansion of the Generative AI Market and AI Infrastructure 3. Transition from Generative AI to Physical AI 4. Bottlenecks in Social Implementation and Solutions through Joint Ventures 5. Formation of an Implementation Ecosystem through Policy and Finance 6. Q&A / Business Card Exchange 2. Needs, Development Trends, Future Possibilities, and Challenges of Physical AI Mr. Kazushi Asama, Senior Researcher, Next-Generation Robot Research Organization, Waseda University / Emeritus Professor, University of Tokyo 1. What Physical AI Means 2. Needs for Physical AI and the Technological Trends of Generative AI Behind It 3. Development Trends of Physical AI 4. Future Possibilities and Challenges of Physical AI 5. Q&A / Business Card Exchange