[Optional Product Addition] WIRE CAM DX

By utilizing IT, we significantly enhance the productivity of board manufacturing! We support the reduction of lead times, prevention of variability, and reforms in work styles as well as the resolution of labor shortages.

WIRE CAM DX is a simulation software that can create manufacturing information for panels from design drawings. By digitizing the know-how of engineers, it is an IT solution that transforms the wire processing, component installation, and wiring tasks in the panel manufacturing process, which are often reliant on individual expertise, into tasks that anyone can perform, even without specialized skills. 【Features】 ■ Wiring design can be done using various files in addition to CAD data. * Files such as ECAD, DWG, PDF, TIFF, etc. are available. ■ In wiring design, wiring length measurement can be performed with automatic route selection. ■ Data for mark tube processing can be output to processing machines, and wiring length measurement data can be output to wire processing machines, allowing for pre-processing of wires. * Partner processing machine manufacturers: Lion Power, Kodera Electronics Manufacturing, CTK, Mibu Electric Manufacturing, Max, etc. ■ By preparing wires in advance and performing parallel tasks, manufacturing lead time can be shortened. ■ A function that guides component installation positions and wiring routes enables non-technical personnel to achieve high-quality work in a short period. ■ By introducing optional products, it is also possible to manage screw tightening torque. * For more details, please download the materials from the link below. Feel free to contact us with any inquiries.

• 2D CAD Electrical
• Other CAD related software

Eliminate defects during plate manufacturing! The system manages the appropriate screw tightening torque. Anyone can achieve proper screw tightening work.

The torque management system is an optional product of the panel manufacturing support system "WIRE CAM DX." Forgetting to tighten screws or insufficient fastening torque during screw tightening work can lead to wiring disconnections and contact failures caused by machine vibrations, making it a very important task. The torque management system is a completely new system that allows anyone to perform this screw tightening work by managing the fastening torque, ensuring that the work is always done with the appropriate torque. 【Features】 ● A screw tightening torque management system that operates in conjunction with WIRE CAM DX has been added as a hardware option. ● It is now possible to set torque values for terminal information. (WIRE CAM DX feature) ● Addition of terminal information monitoring function (WIRE CAM DX feature) ● The processing during terminal tightening has been subdivided to improve productivity during manufacturing, and status symbols have been added. (WIRE CAM DX feature) 　〇: Main tightening on the source side, ◎: Main tightening on both ends, ◇: Temporary tightening on the source side, ◆: Temporary tightening on the destination side.

• Other CAD
• Document and Data Management

We have newly added a **"Frequently Asked Questions Q&A"** section to the Hyper CLT sheet website. It clearly summarizes many questions frequently asked by those considering the introduction of the product, such as "What types of civil engineering sites can it be used on?", "Can it be used on rainy days?", "Is it compatible with large machinery?", and "What is NETIS?". The Hyper CLT sheet is a lightweight wooden sheet utilizing wood CLT, suitable for a wide range of applications including temporary roads, access routes, and heavy machinery work yards. It is also registered as a **Ministry of Land, Infrastructure, Transport and Tourism NETIS registered technology "TH-250021-A"**. Since it is a new material, we will not leave any uncertainties unaddressed. We aim to create a website that makes it easy to resolve questions before introduction, including information on wood, NETIS, civil engineering, and CLT, and we will continue to enhance the Q&A section.

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

We have published the latest issue (No. 94) of the ISO-related information magazine "Intertek News." Intertek News delivers information and various topics related to ISO audits, certifications, and verifications. This issue features a special section titled "Interpreting Standard Revisions," which introduces key points of management system standard requirements that new personnel should understand as preparation for standard revisions. Additionally, we have included customer case studies, articles contributed by auditors, and information on certifications and standards, as well as the latest topics, so please take a look.