A pressure sensor that can change the pressure range! There's no need to prepare separate sensors for each range!

High-precision and low-cost pressure sensor

The pressure sensor series 23SX is a high-precision pressure sensor that compensates for temperature dependence and non-linearity through mathematical correction within the microcontroller. It comes standard with two outputs: digital RS485 and analog output via a D/A converter. With a fully welded structure that does not use internal seals, it can be used in a wide range of applications. Only stainless steel comes into contact with the measured medium. 【Features】 - Standard equipped with two outputs: digital RS485 and analog output - The analog output can be range-changed via digital RS485 - Achieves excellent long-term stability - Fully welded structure without internal seals 【Technology】 - Piezo-resistive pressure sensor - Correction technology using a mathematical model to provide accurate pressure values - Based on the technology used in the 33X series, achieving the highest level of accuracy

• Pressure

High-precision pressure sensor with RS485 digital output. Atmospheric pressure range (800 to 1200 hPa) is also available!

The pressure sensor 33X achieves an extremely high accuracy of 0.05% full scale (FS) in the temperature range of 10 to 40°C through a mathematical correction method. An additional option for high precision of 0.01% FS is also available. In addition to a digital RS485 interface, analog current or voltage outputs can be obtained. 【Features】 - Accuracy of ±0.05% FS in the temperature range of 10 to 40°C - Standard dual outputs of digital RS485 and analog output - Analog output can be range-adjusted via digital RS485 - Available in barometric range type (800–1200 hPa) and differential pressure range type (from 0–30 kPa to 0–3 MPa) - Temperature range of -20 to 125°C (optional -40°C also available) - Excellent long-term stability 【Technology】 - Piezo-resistive pressure sensor - Correction technology using a mathematical model to produce accurate pressure values

• Pressure

High-precision pressure sensor for OEM use

【Features】 - Accuracy of ±0.1% FS over a temperature range of -10 to 80℃ - Standard dual outputs of digital RS485 and analog output - Excellent long-term stability - Welded flush diaphragm 【Technology】 - Piezo-resistive pressure sensor - Correction technology using a mathematical model for accurate pressure values - Ideal for mounting with O-rings

• Pressure

High-precision pressure sensor in sensor head type, ideal for OEM applications!

The 20SX series pressure sensor head with screw connection is specially designed and optimized for OEM applications, achieving the highest level of accuracy, excellent long-term stability, and high pressure resistance. Features that many pressure sensor manufacturers offer only as options are standard in Keller products. The 20SX series is characterized by a compact, fully welded design and high-precision, range-changeable digital correction electronics. Accuracy errors, including thermal effects, are minimized or corrected using mathematical models. As a result, it achieves the highest accuracy and an extremely narrow Total Error Band (TEB). The introduction of the 20SX series has further expanded OEM products. 【Features】 • High accuracy of ±0.05% FS • Standard dual outputs of digital RS485 and analog output • Analog output can be range-changed via digital RS485 • Excellent long-term stability 【Technology】 • Piezo-resistive pressure sensor • Fully welded structure without internal seals • Correction technology using mathematical models to provide accurate pressure values • Based on the technology used in the 33X series, achieving the highest level of accuracy.

• Pressure

Digital output + high precision low-pressure pressure sensor explosion-proof type / differential pressure type also available

The capacitive pressure sensor series 41X is designed to measure gauge pressure in low pressure ranges. Through a mathematical correction method, it achieves high accuracy of ±0.2 to 0.3% FS even in low pressure measurements within a temperature range of 10 to 50°C. In addition to a digital RS485 interface, analog current or voltage outputs are also available. 【Features】 - Although calibrated in the standard range, programming of the analog output signal within the standard pressure range is possible using the license-free software CCS30 (e.g., standard pressure range 0-10 kPa/output 4-20 mA → pressure range 2-6 kPa/output 4-20 mA). - Using software CCS30 and converter K-114, pressure values can be displayed on a PC. Recording of pressure signals and graphic display, as well as zero adjustment, are also possible. - Up to 128 transmitters can be connected to the bus system. - Intrinsically safe explosion-proof type 41X-Ei / differential pressure type PD-41X.

• Pressure

High-precision differential pressure sensor with RS485 digital output (±0.05%). Liquid/liquid differential pressure measurement is also possible!

The differential pressure transmitter PD-33X is a high-precision differential pressure sensor capable of measuring liquid/liquid differential pressure. A single silicon diaphragm integrated inside directly measures the pressure difference exerted from both ports. This design allows for the measurement of small pressure differences even under very high line pressures. It achieves an extremely high accuracy of 0.05% full scale (FS) in the temperature range of 10 to 40°C using correction technology based on a mathematical model that provides accurate pressure values. 【Features】 - Accuracy of ±0.05% FS in the temperature range of 10 to 40°C - Capable of measuring liquid/liquid differential pressure - Standard equipped with two outputs: digital RS485 and analog output - Analog output can be range-changed via digital RS485 - Temperature range of -20 to 125°C (optional -40°C available) - High line pressure (up to 60MPa) - Excellent long-term stability 【Technology】 - Piezo-resistive pressure sensor - Correction technology using a mathematical model to provide accurate pressure values

• Pressure

Intrinsic safety explosion-proof pressure sensor achieves high precision!

The intrinsically safe explosion-proof pressure sensor 33XEi achieves an extremely high accuracy of 0.05% full scale (FS) over a temperature range of 10 to 40°C through a mathematical correction method. An additional option for 0.01% FS high precision is also available. In addition to a digital RS485 interface, analog current or voltage outputs can be obtained. The pressure connection of the 35XEi features a G1/2" flush diaphragm structure. 【Features】 - Accuracy of ±0.05% FS over a temperature range of 10 to 40°C - Standard dual outputs of digital RS485 and analog output - Analog output can be range-adjusted via digital RS485 - Excellent long-term stability 【Technology】 - Piezo-resistive pressure sensor - Correction technology using a mathematical model to produce accurate pressure values

• Pressure

Dear Sir/Madam, I hope this message finds you well and thriving. I would like to express my sincere gratitude for your continued support. We would like to inform you that our company will be closed for summer vacation during the following period: ■ Summer Vacation Period From Saturday, August 8, 2026, to Sunday, August 16, 2026. We will resume normal operations on Monday, August 17, 2026. Inquiries received during the vacation period will be addressed sequentially after the start of business. We apologize for any inconvenience this may cause and appreciate your understanding.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, the use of sheet piling methods is essential for safely utilizing the site, including temporary roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates have been widely used, but due to their weight, they can be cumbersome to transport, install, and remove. Hyper CLT sheet piles are civil engineering materials made from wooden CLT for civil use. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to handle with small machinery, contributing to reduced burdens during installation and improved work efficiency. They can be utilized in a wide range of civil engineering sites for measures against muddy conditions, ground protection, heavy machinery scaffolding, and ensuring pedestrian pathways. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A," it is also recommended as a material for innovative ideas, safety measures, and environmental considerations in public works.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!