About the "Automatic Stop Function after 10 Years" for the Underfloor and Attic Ventilation Fan Series.

Exhaust type + diffusion type unit! A subfloor ventilation series that detects humidity conditions and draws in dry air from beneath the floor.

The system detects the amount of water vapor (absolute humidity) and independently controls the exhaust ventilation system and the diffusion fan. When there is a high amount of water vapor, only the diffusion fan operates, and when it is low, the exhaust ventilation system also operates to bring in dry air from below the floor. POINT 1: Optimal independent operation of exhaust and air supply with absolute humidity sensor POINT 2: Optimal deodorization operation with standard phytoncide POINT 3: Detects abnormalities in the underfloor ventilation fan and water issues, displaying them on the controller. 【Features】 ○ Effective against underfloor humidity, condensation, and mold ○ Powerful exhaust and diffusion For more details, please contact us or download the catalog.

• Ventilation and Exhaust

Exhaust type + stirring type unit type

It detects the amount of water vapor (absolute humidity) and independently controls the exhaust ventilation system and the mixing fan. When there is a lot of water vapor, only the mixing fan operates, and when there is less, the exhaust ventilation system operates as well, bringing in dry air from below the floor. POINT 1: Optimal independent operation of exhaust and air blowing with absolute humidity sensors POINT 2: Optimal deodorization operation with standard phytoncide POINT 3: Detects abnormalities in the underfloor ventilation fan and water issues, displaying them on the controller. 【Features】 ○ Effective against underfloor humidity, condensation, and mold ○ Powerful exhaust and mixing For more details, please contact us or download the catalog.

• Ventilation and Exhaust

24-hour ventilation (strong/weak, switchable) type

This product addresses the importance of ventilation highlighted by the Sick House Law. By specializing in underfloor ventilation, it responds to the negative pressure that occurs indoors due to ventilation fans (Type 3 ventilation system), which causes the indoor air to be depressurized, allowing air from under the floor to flow into the room. This characteristic prevents the inflow of dust, moisture, and other contaminants into the indoor environment that accompany the inflow of underfloor air during negative pressure conditions. Additionally, it simultaneously prevents the indoor inflow of harmful substances such as "formaldehyde." The dedicated controller detects the amount of water vapor in the outside air with sensors and automatically adjusts the ventilation system's operation strength, enhancing ventilation efficiency. 【Features】 - Effective against underfloor moisture, condensation, and mold - Powerful exhaust and mixing For more details, please contact us or download the catalog.

• Ventilation and Exhaust

24-hour ventilation (strong/weak, switchable) type

High functionality and innovative design backed by data. A diffuser shape aimed at efficient stirring, blowing air in a 90-degree wide direction. Used as a "relay" to maximize the capabilities of exhaust-type ventilation systems and to circulate air within the underfloor space through powerful blowing and suction. Additionally, it offers various new usage suggestions based on purpose and location, such as localized use in moisture-prone areas like bathrooms. Of course, it adopts a large sirocco fan type with high airflow. With a three-dimensional design that minimizes air resistance and a quiet design, it smoothly draws in heavy, moisture-laden air. 【Features】 ○ Effective against underfloor moisture, condensation, and mold ○ Powerful exhaust and mixing For more details, please contact us or download the catalog.

• Ventilation and Exhaust

24-hour ventilation (strong/weak, switchable) type

High functionality and innovative design backed by data. A large airflow type of Sirocco fan is adopted to more effectively stir the air under the floor and in the ceiling space. The powerful airflow is emitted in four directions. With a unique scroll shape that minimizes waste, it achieves approximately twice the wind reach distance compared to conventional types, with a diameter of about 9 meters (wind speed of 0.5 m/s). The three-dimensional design with low air resistance and quiet operation smoothly draws in heavy, moisture-laden air. The body is made of lightweight and durable aluminum alloy, eliminating concerns about rust. 【Features】 ○ Effective for moisture, condensation, and mold prevention under the floor ○ Powerful exhaust and mixing For more details, please contact us or download the catalog.

• Ventilation and Exhaust

A comfortable indoor environment! Prevents condensation and extends the lifespan of the building.

The underfloor ventilation "Kazetaro" maintains a comfortable condition for wood by forcibly introducing air into the underfloor space. It is particularly effective in eliminating condensation. Underfloor ventilation also affects the indoor environment, reducing the conditions for the growth of dust mites and mold, which benefits the health of the family. The Kazetaro unit uses a hybrid sensor to detect the amount of water vapor (humidity) in the outside air, and the hybrid controller independently controls the Kazetaro blower type and Kazetaro mixer type, creating optimal ventilation operation for the wood under the floor. 【Features】 ○ Improves ventilation effectiveness to prevent pest breeding ○ Forcibly introduces air into the underfloor space to prevent condensation ○ Maintains a comfortable condition for wood, extending the lifespan of the building ○ Reduces the conditions for the growth of dust mites and mold, making the indoor environment comfortable For more details, please contact us or download the catalog.

• Ventilation and Exhaust

Equipped with a water immersion sensor! Detects leaks due to flooding under the floor, deterioration, and damage to drainage pipes, etc.!

"Kazutarou Basic" is a localized underfloor ventilation system designed to address areas prone to high humidity and stagnation, such as water-related areas and the north side. Equipped with a flooding sensor, it quickly detects not only underfloor flooding due to water damage but also leaks caused by deterioration or damage to drainage pipes, providing peace of mind by alerting you to abnormalities. We offer two models: the timer type with a flooding sensor, "Kazutarou Basic SS," and the standard timer type, "Kazutarou Basic." 【Features】 ■ Equipped with a flooding sensor ■ Detects underfloor flooding and leaks due to deterioration or damage to drainage pipes ■ Supports environments where natural ventilation is insufficient with forced ventilation ■ Safety measures against increasing underfloor flooding and leaks *For more details, please refer to the external link page or feel free to contact us.

• Safety Sensors
• Ventilation and Exhaust

Contributes to the prevention of condensation and mold under the floor. A new model compatible with the foundation packing method has been introduced.

The "DRY PRO" Ver3 is an electronic dehumidifying and blowing unit for underfloor use, combining a Peltier cooling device with a dedicated stirring and diffusion-type blower. In addition to the diffusion-type model "TYPE-D" for foundation insulation construction, a new model "TYPE-C" compatible with foundation packing construction has been added to the lineup. It can dehumidify even in areas where moisture tends to accumulate by stirring a wide range of air. It helps suppress moisture and condensation under the floor, contributing to the prevention of mold, pests, and decay fungi in wooden parts under the floor. Furthermore, with the version upgrade in June 2024, a powerful dehumidification operation mode will be added. The surrounding temperature range for dehumidification operation (low-temperature dehumidification operation range) has been expanded, allowing operation at surrounding temperatures down to 5°C. 【Features】 ■ Easy installation with a φ22 drainage hole (no drainage pump required) ■ Automatic operation possible with a dedicated indoor controller ■ The direction of the aluminum duct of the blower can be set freely ■ Dehumidification capacity of 1800mL per day (depending on conditions) ■ Uses fluorine-free electronic cooling technology ■ Compatible with underfloor flooding sensors (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Dehumidifier

Measures against heat in the attic! Expels accumulated heat and improves air conditioning efficiency! Effective against humidity, condensation, and VOCs!

Modern houses have become highly airtight and well-insulated, resulting in issues such as the heat accumulated in attics reducing air conditioning efficiency during hot seasons. "Attic Ventilation Wind Helper" helps to forcibly expel the heat from the attic, improving air conditioning performance and assisting with condensation and VOC measures. We will present a demonstration unit, so please contact us for details and conditions. *The demonstration schedule will be arranged separately. 【Effects】 ○ Expels heat from the attic, improving air conditioning efficiency ○ Shuts out condensation ○ Effectively expels formaldehyde and VOCs, which are causes of sick house syndrome, protecting the health of your family and home. For more details, please contact us or download the catalog.

• Ventilation and Exhaust

24-hour ventilation (strong/weak, switchable) type

High functionality and innovative design backed by data. A large high-volume type of Sirocco fan is adopted to more effectively stir the air under the floor and in the ceiling space. The high-volume air blows out in four directions. With a unique scroll shape that minimizes waste, it achieves about twice the wind reach distance compared to conventional types, with a diameter of about 9 meters (wind speed of 0.5 m/s). The three-dimensional design with low air resistance and quiet operation smoothly draws in heavy, moisture-laden air. The body is made of lightweight and durable aluminum alloy, eliminating concerns about rust. The controller with a temperature sensor detects the temperature in the ceiling space and switches between strong and weak operation. The newly designed high-performance two-speed motor operates strongly to expel heat when the ceiling temperature rises, and operates weakly when the temperature drops. 【Features】 ○ Effective for heat and condensation measures in attics ○ Automatic operation based on temperature detection For more details, please contact us or download the catalog.

• Ventilation and Exhaust

Exhaust type + stirring type unit type

High functionality and innovative design backed by data. With a unique blower shape and intake design, it achieves approximately six times the static pressure compared to conventional models. It powerfully exhausts hot air with a three-dimensional design that minimizes air resistance and features a quiet operation. Through a flexible duct, it exhausts air from a pipe hood under a gable roof, allowing for easy installation by simply drilling a ∅100 hole in the ceiling. 【Features】 ○ Effective for heat and condensation control in attics ○ Automatic operation triggered by temperature detection For more details, please contact us or download the catalog.

• Ventilation and Exhaust

Effective for heat and condensation prevention in the shed.

With its unique design, the "Stirring Blower" has become even more powerful. It features a large silencer-type Sirocco fan that efficiently stirs the air drawn in. A large volume of air is blown out in four directions. The efficient scroll shape achieves an air delivery distance of approximately 9 meters in diameter. The body is made of lightweight and durable aluminum alloy, so there is no worry about rust. 【Features】 ○ Effective for heat and condensation prevention in attics ○ Automatic operation triggered by temperature sensing For more details, please contact us or download the catalog.

• Ventilation and Exhaust

Features: ● Equipped with Intel Core Ultra 9 285H/7 255H/5 225H ● DDR5 SODIMM x 2 (up to 128G) (sold separately) ● VGA Switch DDI x 1, LVDS colay eDP x 1, DDI x 2 ● USB 2.0 x 8, USB 3.2 Gen 2 x 4 ● PCIe [x1] x 4, PCIe [x4] x 1, PEG [x8] + [x4] + [x4] ● 2.5GbE x 1 ● COMe Type6 standard, 95mm x 95mm size ● Operating temperature -20~70℃ ● Sold separately ECB-920A: Development carrier board COM-MTHC6-FAN01: CPU fan COM-MTHC6-HSP01: Heat spreader (※ Heat dissipation is required in the enclosure)

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Processor: Qualcomm QCS6490 with Arm Cortex-A78 ×4 + Cortex-A55 ×4 (Octa-core) up to 2.7GHz ● LPDDR5 onboard memory (up to 8GB) ● Display: MIPI-DSI (4 lanes) ×1, DisplayPort ×1 ● USB 2.0 ×4 (one port supports OTG), Gigabit Ethernet ×2

In civil engineering sites during extreme heat, the surface temperature of the ground plates and the heat reflection significantly affect the working environment. In particular, steel plates tend to retain heat when exposed to sunlight, posing challenges for workers' heatstroke prevention and safety management. Hyper CLT ground plates are civil engineering materials utilizing wood CLT. As wooden ground plates, they can be used for temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways, making them a versatile alternative to steel plates in various civil engineering sites. In actual sites, there are cases where the surface temperature differs by about 20 degrees compared to steel plates, making them effective as a solution for heat prevention and reflection suppression. The 5×10 plate weighs approximately 230 kg, and the 5×20 plate weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which helps reduce the burden of transportation, installation, and removal. They are materials that easily promote noise reduction, CO2 fixation, and environmental consideration unique to wood. Registered as a Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A," they can also be utilized for creative ideas and safety measures in public works. They are recommended for companies looking to reassess the summer site environment. We also accept inquiries for consultations and requests for materials tailored to site conditions. We can propose solutions for temporary plans during summer for both public and private civil engineering projects. Please feel free to consult with us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.