We will be exhibiting at the "New Functional Materials Exhibition 2026" from January 28 (Wednesday) to January 30 (Friday), 2026.

It has excellent chemical resistance to acids, alkalis, and organic solvents!

The "PS type" is a wet non-woven fabric made from 100% PPS fiber (polyphenylene sulfide). It demonstrates excellent performance in heat resistance, steam heat resistance, chemical resistance, thermal insulation, and flame retardancy, making it suitable for filter substrates for water, oil, and air, as well as tape substrates. Additionally, it shows excellent hydrolysis resistance to steam, maintaining over 90% strength retention even at 160°C in an autoclave. 【Features】 ■ Heat resistance ■ Thermal insulation ■ Steam heat resistance ■ Flame retardancy ■ Chemical resistance *For more details, please refer to the PDF document or feel free to contact us.

• Paper and pulp products

This is a wet non-woven fabric suitable for applications such as filter substrates, printing substrates, and tape substrates!

The "TH type" is a wet non-woven fabric made of 100% polyester, featuring characteristics such as dimensional stability and resin impregnation. It comes in high-density 05TH, low-density 15TH, and ultra-high-density S, with thermal dimensional stability stable up to 200°C. Additionally, due to its high smoothness and resin adhesion, it can be used not only for industrial applications but also across a wide range of other fields. 【Features】 ■ Printability and insulation ■ Dimensional stability ■ Chemical resistance ■ Weather resistance ■ Smoothness *For more details, please refer to the PDF document or feel free to contact us.

• Paper and pulp products

No chemicals are used at all; it can be bonded using heat! Safe to use even for food and other items.

The "HOP type" is a wet non-woven fabric made of 100% polyolefin, which is finer and consists of single fibers compared to dry types. The polyolefin fibers are core-sheath fibers of PP/PE, where the PE sheath melts on the dryer surface, firmly bonding the fibers together without the use of any adhesives. Additionally, the sealing temperature is around 140°C. Since no chemicals are used and bonding can be achieved through heat, it can be safely used for food and medical applications. 【Features】 ■ Heat sealability (both sides can be heat sealed at approximately 140°C) ■ Thermoforming ■ Hydrophobic ■ Electrical insulation ■ Oil absorption ■ Chemical resistance *For more details, please refer to the PDF document or feel free to contact us.

• Paper and pulp products

Introducing non-woven fabrics that exhibit numerous excellent properties such as oil resistance, corrosion resistance, and heat resistance!

The "VN type" is an extremely distinctive wet non-woven fabric made of 100% strongly bonded vinylon fibers. In addition to high strength, it exhibits numerous excellent properties such as fold resistance, abrasion resistance, chemical resistance, oil resistance, corrosion resistance, and heat resistance. It is suitable for applications such as battery separators, civil engineering materials, plywood reinforcement materials, and acoustic components. 【Features】 ■ High strength ■ Fold resistance ■ Heat resistance ■ Chemical resistance (alkaline) ■ Abrasion resistance *For more details, please refer to the PDF document or feel free to contact us.

• Paper and pulp products

Nanofiber composite non-woven fabric

By combining the conventional wet non-woven fabric layer with the nano-fiber layer, we were able to significantly improve processing without losing the excellent properties of the nano-fibers. 【Features】 ● Since it is a spinning method that does not use nozzles, there is no decrease in spinning speed due to nozzle clogging. ● It is easy to increase the spinning area, allowing for a larger spinning quantity. ● By unitizing the spinning section that generates nano-fibers, it is possible to average the spinning quantity and reduce weight variation. ● It is possible to directly spin nano-fibers onto substrates such as non-woven fabrics, making it easy to combine with existing non-woven fabrics. ◆◇ For more details, please request materials or feel free to contact us ◇◆

• others

We will be exhibiting at the "P-MEC Japan 2025 Pharmaceutical Ingredients and Equipment Exhibition" held at Tokyo Big Sight. During the event, we will showcase various products. We invite all relevant parties to come and visit us. 【Suppliers】 ・LAUDA

In conversations with engineers in the manufacturing industry, I have increasingly received the following inquiries: - Confusion in interpreting experimental results - Taking time to organize hypotheses regarding the causes of troubles - Uncertainty about how to evaluate the impact of changes in raw materials or processes - Anxiety about the judgment of results from external testing organizations Considering the themes being discussed internally, I thought, "Could there be an opportunity to provide support as a third-party engineer for brainstorming?" Therefore, we have decided to establish a trial "Technical Consultation Opportunity." 【Overview of Technical Consultation】 - Target: Engineers and research and development personnel in the manufacturing industry, etc. - Content: Organizing experimental plans, interpreting results, organizing trouble hypotheses, etc. - Format: Online (approximately 60 minutes) - Cost: Free for the first consultation - Recruitment: Limited to 5 companies *Please note that we will take sufficient care to respect the confidentiality of each company's information and will not disclose anything externally. We hope you can consult with us with confidence. This will be more of a space for open exchange of opinions between researchers and engineers rather than a sales proposal. If you have any themes you are currently considering, please feel free to reach out. If you are interested, please contact us with "Request for Technical Consultation," and we will provide you with further details.

Thank you very much for visiting our booth this time. Thanks to you, we had the opportunity to introduce our products and technologies to many customers, making it a very meaningful time. If you have any questions regarding the exhibition content or if you would like to discuss specific considerations or estimates, please feel free to contact us. We will be happy to provide proposals tailored to your needs.

[Lecture Topics] 1. About AI Robotics Tomoya Yokoyama, Section Chief, Robot Policy Office, Industrial Machinery Division, Ministry of Economy, Trade and Industry *The content of the lecture may change. 2. Development of Remote-Controlled Robots Aiming for a Realistic Operating Experience ~Visual and auditory transmission through ultra-low latency, high presence, and high immersion~ Hiroshi Inagaki, Senior Manager, Collaborative Robotics Group, R-Frontier Department, Future Creation Center, Toyota Motor Corporation 3. The Impact of Japanese-Made Humanoids Yasuke Ono, President, Donut Robotics Inc.

[Speaker] Inclusive Design Designer Yoko Nakao [Key Lecture Content] Products are not selling, differentiation is difficult, and regulations are changing. As product development and facility management reach a significant turning point, inclusive design, which involves engaging people who have previously been excluded from the development process to collaboratively think of solutions, is gaining attention as a method for creating new value. Additionally, practicing inclusive design is expected to enhance not only customer engagement but also employee engagement. In this seminar, based on 20 years of experience leading universal design and inclusive design with diverse characteristics both inside and outside a comprehensive electronics manufacturer, I will specifically explain how to practice inclusive design to create new value. [Lecture Items] 1. Inclusive Design as a New Growth Engine 2. Increasing the Resolution of Diversity 3. Inclusive Design Process 4. Side Effects - Ripple Effects on Talent Development and Recruitment 5. Conclusion 6. Q&A / Business Card Exchange