We will be exhibiting at the "Decoration Technology Exhibition 2026."

Vacuum deposition is a processing technique that heats and evaporates metals or oxides in a high vacuum to deposit them onto a substrate surface.

Our company has been establishing vacuum deposition technology since the 1950s. A representative deposition metal is aluminum, which is deposited on the surface of glass substrates and plastic molded products, and further coated with oxide films such as SiO2 and TiO2 using electron beam deposition, being utilized as high-reflective mirrors like reflectors.

• Processing Contract
• Surface treatment contract service

Sputtering is a physical thin film formation technology (PVD) that allows for the coating of metals and dielectrics on the surfaces of substrates such as glass and plastic.

Sputtering is a new surface treatment technology that applies ion engineering, characterized by the absence of pollution issues like those associated with resin plating, and the ability to plate chromium (Cr), which is difficult with vacuum deposition. It can also plate Cr on various engineering plastics other than ABS resin, marking the dawn of a new era in plastic surface treatment with this new technology. In addition to Cr, almost all metals can be used, and it can produce color tones similar to resin-plated Cr, among many other excellent features. As a result, the range of applications is broad, and sputtering products are expected to be widely used for decorative purposes in automobiles, consumer electronics, audio equipment, cosmetics, and more.

• Processing Contract
• Surface treatment contract service

This is a "comb-shaped electrode chip" made by thin-film pattern processing of various metals. We handle everything from electrode configuration to thin-film processing and chip processing in a consistent system.

Are you troubled by such issues? - It’s difficult to manage delivery times when ordering thin film processing and pattern processing separately. - I haven’t put it into a drawing, but could you provide some consultation? - I want to achieve fine wiring, but I would like advice on the deposition materials. - Can you accept orders for pattern processing alone? - Can you accommodate a line and space (L/S) of 10μm? ■ Microfabrication Technology We realize fine patterning through photolithography, etching, and metal masks. Depending on customer requirements, we select the best processing methods and resists. However, it is necessary to align conditions such as deposition materials, substrates, film thickness, and thin film stacking configurations. Please consult us regarding sub-micron or nanometer level patterns. ■ Small-scale prototyping is also possible. In manufacturing, the cycle of hypothesis and verification is an essential process. No matter how advanced simulation technology becomes, verification cannot be omitted. Therefore, at Adachi New Industry, we are happy to undertake prototyping for characteristic verification. Please contact us first.

• Circuit board design and manufacturing
• Other physicochemical equipment
• Analytical Equipment and Devices

It is a historic chemical products trading company founded in the 7th year of the Taisho era, and at the same time, it is a technology company that performs cutting-edge processing such as optical thin films and patterns in its own factory.

Adachi New Industry Co., Ltd. is a company primarily engaged in the manufacturing and sales of chemical industrial products and synthetic resin materials, as well as the production and processing of optical thin films and functional films. Additionally, we are involved in cutting-edge technologies such as pattern processing using photolithography and etching techniques, as well as research and development. 【Business Activities】 (Surface Treatment Business) - Optical thin films, vacuum deposition, sputtering - Pattern processing (electrochemical analysis chips, comb-shaped electrodes, etc.) (Trading Business) - Sales of chemical industrial products (various synthetic resins, adhesives, silicones, hot melts, etc.) - Processing of resin molded products and mold processing - Sales of nanomaterials and nanoparticles *For more details, please refer to our catalog or feel free to contact us.

• Laser Components
• Surveillance Cameras
• Sensors

Over 500 successful projects and a rich lineup of film deposition processing. With 100 years of experience since our founding, we contribute to our customers' technological innovations through optical thin films and precision processing technologies.

Adachi New Industries does not simply perform film deposition. We aim to be a company that can provide comprehensive proposals, from thin film design to deposition processes and product shape processing, according to our customers' specifications. Do you have any of the following concerns? - Is it possible to change characteristics based on the performance of the light source or photodetector? - If characteristics change with angle, can simulations be performed? - I would like to see product characteristics with a small batch prototype first. - After starting mass production, can you provide efficient proposals? - Can you measure filters with unknown optical characteristics? 【Features】 ■ High transmittance and reflectance ■ Product stability ■ Film deposition on various substrates ■ Comprehensive coverage as a product ■ Small batch prototype support available (single item support possible) * For more details, please refer to the catalog or feel free to contact us.

• Other optical parts
• Sensors
• LED lighting

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.