The email newsletter "Epsilon Communication Issue 50" has been distributed.

Case Study: "Outdoor Exposure Measurement System with Remote Monitoring Function for Solar Cells" PDF

In a self-consumption solar power generation system with multiple strings, during the day, one I-V curve tracer will switch between the target modules to measure the I-V curve, and at night, one PV remote monitoring device will evaluate the bypass diode, blocking diode, and insulation resistance.

• Other electronic measuring instruments

Automatically detects the occurrence of "solar cell malfunctions" and "DC ground fault incidents" that lead to fire accidents in solar power generation systems, serving as a safety net!

In solar power generation systems, there is a risk of fire accidents caused by factors such as leakage current and failures of bypass diodes in solar cells. To detect these issues, manual inspection work using devices like megohmmeters and bypass diode testing equipment is necessary. However, this device automatically performs these inspection tasks. It captures changes in conditions that are difficult to detect through monitoring measurement values via power conditioners, significantly contributing to the safe operation of solar power generation systems and the maintenance of power generation capacity. Furthermore, it is an unprecedented remote monitoring device capable of detecting cable theft (disconnection) on the DC side. ◆ Measurement of insulation resistance of solar cell strings (DC ground fault detection and ground fault location identification) ◆ Measurement of bypass routes ◆ Measurement of blocking diodes (reverse current prevention diodes) ◆ Measurement of operating voltage of solar cell strings

• others

High-precision IV curve measurement device. Detailed measurement settings and automatic measurements can be performed without a PC. Ideal for the development and research of solar cells, such as outdoor exposure tests. [Demo unit available for loan◎]

We have adopted an electronic load method to achieve high-performance I-V curve measurement. Based on customer requirements, we will configure a solar cell evaluation system centered around this device. We can also propose systems such as measurement systems in open state and grid-connected measurement systems using power conditioners. Of course, it can also be used for maintenance purposes. ◆ Variable sweep direction: short circuit → open circuit, open circuit → short circuit, etc. ◆ Variable sweep time: 150[ms] to 1000[ms] ◆ I-V curves can be checked on-site using a high-resolution color monitor ◆ Measurement of special solar cells (CPV) from a single unit is possible ◆ Clear graph display through 1024-point measurement * For more details, please download the PDF or feel free to contact us. * Demo units are also available for loan, so please get in touch.

• Testing Equipment and Devices
• Other inspection equipment and devices

I-V curve tracer that measures the generation quadrant and reverse voltage quadrant with electronic load function and reverse voltage application function [Demo unit available for loan◎].

In addition to measuring the power generation quadrant characteristics of solar cells, measuring the reverse voltage quadrant characteristics allows for accurate short-circuit current (Isc) measurements and also enables the measurement of bypass diode characteristics within the solar cells. We will configure a solar cell evaluation system centered around this device to meet customer requirements. We can also propose systems such as measurement systems in an open state and grid-connected measurement systems using power conditioners. ◆ The electronic load and reverse voltage application function allow for I-V curve checks in both the power generation quadrant and the reverse voltage quadrant. ◆ The sweep direction is variable: short-circuit to open-circuit, open-circuit to short-circuit, etc. ◆ The sweep time is variable: 150 [ms] to 1000 [ms]. ◆ I-V curves can be checked on-site using a high-resolution color monitor. ◆ Measurements can be taken from a single special solar cell (CPV). ◆ Clear graph displays are achieved through 1024-point measurements. * For more details, please download the PDF or feel free to contact us. * Demo units are also available for loan, so please get in touch.

• Other electronic measuring instruments

It is a switching device used to measure multiple solar cells with a single measuring instrument during outdoor exposure tests and similar applications.

The connection method and number of channels can be adjusted to fit the system, and it will be delivered as a completely custom-made product. ● Capable of switching between 2-wire and 4-wire high voltage DC, with output to I-V curve tracers and PV analyzers, etc. ● Controlled by I-V curve tracers and PV analyzers, measuring each channel based on the set schedule. ● Can be connected to loads such as PCS and MPPT electronic loads.

• others

We have newly added a **"Frequently Asked Questions Q&A"** section to the Hyper CLT sheet website. It clearly summarizes many questions frequently asked by those considering the introduction of the product, such as "What types of civil engineering sites can it be used on?", "Can it be used on rainy days?", "Is it compatible with large machinery?", and "What is NETIS?". The Hyper CLT sheet is a lightweight wooden sheet utilizing wood CLT, suitable for a wide range of applications including temporary roads, access routes, and heavy machinery work yards. It is also registered as a **Ministry of Land, Infrastructure, Transport and Tourism NETIS registered technology "TH-250021-A"**. Since it is a new material, we will not leave any uncertainties unaddressed. We aim to create a website that makes it easy to resolve questions before introduction, including information on wood, NETIS, civil engineering, and CLT, and we will continue to enhance the Q&A section.

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

We have published the latest issue (No. 94) of the ISO-related information magazine "Intertek News." Intertek News delivers information and various topics related to ISO audits, certifications, and verifications. This issue features a special section titled "Interpreting Standard Revisions," which introduces key points of management system standard requirements that new personnel should understand as preparation for standard revisions. Additionally, we have included customer case studies, articles contributed by auditors, and information on certifications and standards, as well as the latest topics, so please take a look.