[Online Seminar] Changing Machining: What Companies Can Achieve with the Implementation of Monitoring Systems (February 12)

To streamline the quality control of shafts and fastening components, and to eliminate setup time. A free online seminar on non-contact measurement will be held.

Our company offers a non-contact measurement solution that contributes to the realization of a flexible line through "OptoQuick" and "OptoFlash." "OptoQuick" enables precise non-contact scanning using optical sensors. It can measure eccentric workpieces, crankshaft pin bearings, joints, and more with high reliability. Additionally, it can be used very close to machine tools, contributing to faster quality inspections. It boasts excellent operability, allowing for easy setup changes and modifications to measurement programs. The "OptoFlash" for small parts excels in measurement speed due to the absence of vertical movement of the sensor and workpiece, executing 100 static measurements in just 2 seconds. 【We respond to the following needs】 ◎ Considering the introduction or switch to a non-contact measurement solution ◎ Planning to eliminate setup times and mix flows for a variety of products ◎ Wanting to enhance traceability while conducting flexible production ★ We are holding a free online seminar on non-contact measurement solutions. Please refer to the basic information section or materials for seminar details. *Detailed information on each product can be viewed via PDF download.

• Other measurement, recording and measuring instruments

Supports on-site productivity with a superior balance of measurement performance, speed, and versatility.

OptoQuick captures and analyzes optical images to measure various workpieces such as cams, cranks, gears, and drive shafts with high precision and in a short time. <Main Features> 1. High Speed and High Precision - Achieves accurate and stable high-precision measurements in seconds using cutting-edge image processing technology. 2. High Flexibility - Capable of measuring various parts with a single unit, allowing for the production of different workpieces in the same manufacturing area. - Excellent operability, with measurement results that are easy to understand, enabling efficient and rapid work. 3. Multi-Sensor - In addition to optical sensors, it supports measurements of various shapes such as holes, shaft runout, cams, and half-strokes using three types of contact sensors. - Combining contact and non-contact technologies creates significant synergies. 4. Improved Workability - By installing it right next to the manufacturing machine, it reduces unnecessary time spent on moving and verifying parts. - Easily accommodates new parts by simply adding configuration files.

• Other measurement, recording and measuring instruments

Achieve high-precision non-contact measurement in seconds <Test measurement of workpieces available (please inquire)>

OptoFlash achieves high-precision measurements by acquiring and analyzing optical images. It enables fast and accurate measurements in production environments of small parts where high precision is required, such as in automotive, general manufacturing, aerospace, and medical fields. It is particularly suitable for dimension verification of electric motor shafts, electronic connectors, hydraulic circuit components, screws, and more. <Main Features> 1. Ultra-fast - The 2D optical technology enables a reduction in cycle time. - The cycle time is remarkably fast, executing 100 static measurements in just 2 seconds. 2. High flexibility - Capable of measuring a wide variety of shapes, from bolts to small shafts. - Achieves static and dynamic measurements of outer diameter, length, roundness, cylindricity, coaxiality, taper, grooves, chamfers, R (shape), shaft runout, screw dimensions, etc., in just a few seconds. 3. Ease of use - The measurement screen is user-friendly while equipped with multi-level access features, allowing level settings according to the operator's tasks and permissions. - Open loading without doors enables robot compatibility, allowing for automation without the need for an operator. 4. Durability - The fixed position of the 2D sensor eliminates mechanical stress. Measurement performance remains consistently stable over millions of cycles. - The need for maintenance is also minimized.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Optical Measuring Instruments

High flexibility! Capable of measuring various components and dimensions without gauge remastering.

"SUPER-MECLAB+.X" is a high-precision measuring instrument for ultra-high precision diameter measurement. It employs NO-VAR technology, ensuring no measurement drift due to temperature changes. Through feed measurement allows for easy and quick multi-diameter measurement. Additionally, it enables checking multiple dimensions for high flexibility in measurement, allowing users to choose from various measurement types. 【Features】 ■ Capable of measuring details that cannot normally be detected ■ Can measure various components and dimensions without remastering the gauge ■ Reduces inspection time and improves measurement performance ■ Provides objective and highly reproducible measurement results that do not depend on the operator's skill ■ Non-contact measurement that does not damage or scratch the workpiece *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.