The product catalog has been updated: AC Electronic Load 63800 Series.

AC electronic load with optimal power factor and crest factor for three-phase output product applications.

The 63800 series is suitable for testing power devices such as uninterruptible power supplies (UPS), off-grid inverters, AC power sources, switches, and breakers. Even when the voltage waveform is distorted, the 63800 series can simulate load conditions with high peak factors and varying power factors while performing real-time corrections. This capability allows for real-world simulations, yielding reliable and unbiased test results. Additionally, using DSP technology, it can simulate nonlinear rectifier loads through a unique RLC operating mode. In this mode, it detects the DUT's impedance and dynamically adjusts the control bandwidth of the load to ensure system stability. The comprehensive measurement capabilities of the 63800 series allow for monitoring the output characteristics of the DUT. Furthermore, voltage and current signals can be verified on an oscilloscope via analog output. Standard interfaces such as GPIB and RS-232 are used for remote control and measurement data transfer for system integration. Additionally, the built-in digital output can be used to control external relays for short-circuit (crowbar) testing.

• Electronic Load Unit

A high-performance multifunctional AC power supply ideal for various power environment simulations and IEC standard tests.

The 61500 series is a high-performance AC power supply equipped with the capability to simulate phenomena such as abnormal voltage surges, drops, and short circuits in power line disturbance (PLD) simulations. By utilizing the software, it is possible to conduct international standard tests IEC61000-4-11/4-13/4-14/4-28, and inrush current tests can also be performed through phase control during ON/OFF operations. This power supply can be used in a wide range of fields, from R&D testing based on various standard tests to automated testing systems on production lines.

• power supply

High-performance stabilized AC power supply with excellent cost performance.

The 61600 series is a stabilized AC power supply that combines low cost, multifunctionality, and convenience. The output voltage variable range is 0 to 350 VAC, and the frequency variable range is 15 to 2000 Hz. By adopting PWM technology, it is capable of delivering a peak current that is six times the rated current.

• Power Supplies

DC electronic load with a module + mainframe structure. Multi-channel type, high precision, high output, equipped with constant impedance mode.

The 63600 series is designed to test multi-output AC/DC power supplies, DC-DC converters, mobile phone chargers, batteries, PC adapters, and power electronics products, making it suitable for applications such as research, development, production, and acceptance testing. It features a CZ (constant impedance) mode that simulates capacitive loads and can also emulate nonlinear loads. The minimum operating voltage is (0.4V @ 80A Typical, 63640-80-80), allowing it to draw rated current even at low voltages, making it suitable for applications requiring low voltage, such as fuel cells. Additionally, it meets the testing requirements for ATX power supplies by providing extensive simulation capabilities for dynamic loading applications. The built-in EEPROM memory allows for the immediate recall of 100 sequences of stored data for testing. The 16-bit measurement circuit performs real-time voltage and current measurements, enabling voltage measurement, adjustment, and short-circuit testing to be simulated through both the front panel and software via a PC.

• Electronic Load Unit

A DC electronic load that can simulate LED electrical characteristics in a module + mainframe configuration.

The LED driver supplies the energy that serves as the light source for the LED and is designed as a constant current source for the LED. The characteristics of an LED driver differ from those of a typical switching power supply, but the structure is very similar. To evaluate an LED driver, it is possible to perform operational checks using actual LEDs, resistors, and electronic loads with CR/CV modes, but it can be challenging to meet the testing conditions. When evaluating an LED driver with a resistor, the relationship between voltage and current becomes linear, as shown by the blue line, which does not fully utilize the characteristics of the LED. When using a DC electronic load with CR/CV modes, it is desirable for both CR and CV modes to operate stably. However, during LED ON/OFF tests or dimming tests, the protection circuit of the LED driver may cause instability in the operation of the electronic load, posing a risk of not being able to conduct the tests successfully. Using actual LEDs as a load can lead to degradation issues over long-term use and requires significant labor to test various types of LED drivers. Chroma has prepared the 63110A/63113A/63115A, based on the 6310A series, to solve the testing issues for LED drivers.

• Electronic Load Unit

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In summer construction sites, the surface temperature of the ground plates and the heat reflection can affect the working environment. In particular, steel plates tend to retain heat when exposed to sunlight, making it a challenge to implement heatstroke prevention measures and improve the site environment for workers. Hyper CLT ground plates are civil engineering materials that utilize wood CLT. As wooden ground plates, they can be used for temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways, serving as a versatile alternative to steel plates in various civil engineering sites. In actual sites, there are cases where the surface temperature can differ by about 20 degrees compared to steel plates, making them an easy-to-suggest material for reducing heat reflection and preventing heatstroke in summer. The 5×10 plate weighs approximately 230 kg, and the 5×20 plate weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which also helps reduce construction burdens. Additionally, they feature noise reduction, environmental consideration, and CO2 fixation, which are unique to wood. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," these ground plates are also easy to utilize for innovative ideas and safety measures in public works. Companies looking to improve summer site environments are encouraged to consider Hyper CLT ground plates.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.