An advertisement for the NMR pipe protector was published in five columns at the bottom of the Daily Sports article on the WBC.

Extend the life of your current water pipes and air conditioning pipes for over 40 years! By converting red rust to black rust, we can rehabilitate the pipes and eliminate the need for expensive pipe replacements.

■Features - Cumulative installation record of over 4,400 buildings as of July 2025 - Extends the lifespan of water pipes for over 40 years, until the building's lifespan - Installation costs are about 1/5 to 1/10 of pipe renewal construction - Patented in Japan and the United States, registered in the Ministry of Land, Infrastructure, Transport and Tourism's NETIS new technology utilization system - No need for water outages, no running costs (electricity or chemicals) - Installed on the outside of pipes, allowing for short-term installation and ensuring hygiene - Comes with a product warranty ■Product Overview By converting red rust that occurs inside old pipes into black rust, we improve and strengthen the pipes, rehabilitating them. It also prevents the new occurrence of red rust. Red rust deteriorates pipes, while black rust has completely different properties. Black rust is smaller in volume, more robust, and insoluble in water, which strengthens the pipes and extends their lifespan by over 40 years. Typically, the lifespan of pipes is shorter than that of buildings (around 20 years), but it can be extended to match the building's lifespan without expensive pipe renewal. ■ Japan System Planning Co., Ltd. ■ Toll-Free Number: 0120-320-390 Official Website: https://www.jspkk.co.jp/jp/contact/

• Piping Materials
• Water treatment equipment
• others

Piping that has been in use for over 25 years poses a risk of leakage!

Pipe deterioration measures are shifting from "replacement" to "extension of life." The NMR Pipe Protector demonstrates a life extension effect greater than that of pipe replacement at one-tenth the cost. It has numerous implementation records both domestically and internationally, converting existing red rust into passive black rust and extending the life of pipes to match the lifespan of the building. ◆ Features and Benefits - Long-term extension of water supply and air conditioning pipes is possible at about one-tenth the cost of pipe replacement work. - Early installation reduces the cleaning costs of drainage pipes. - No water outage work is required during installation. - Numerous verification data: Prevents red rust in galvanized steel pipes with a lifespan of 20 years in buildings that are 60 years old (Teigeki Building, Yaesu Entrance Hall, Shinjuku Famous Bookstore Building, Liberal Democratic Party Hall). ◆ Implementation Records (partial excerpt) [United Kingdom] Buckingham Palace, BBC, Houses of Parliament, Cambridge University Hospital, etc. [Japan] Japanese Red Cross Hospital, famous hotels, department stores, and many others.

• Piping Materials

Replace everything when it gets old? You’ll miss out if you don’t know! Gentle management methods for piping and the reasons behind them. Rust prevention technology that eliminates the need for pipe replacement!

<Aren't you misunderstanding something?> - There won't be any red water, so it should be fine... - If it's VLP pipes or anti-corrosion cores, they won't rust, so it's okay... - For now, we're cleaning the pipes, so it should be alright... - If they get old, we'll just have to replace everything, right... =Knowing will definitely benefit you= - Examples of red rust problems caused by piping as seen in images - What is "black rust" that completely solves the red rust issue? - The chemical change "reduction" that transforms red rust into black rust - Pipe-friendly management methods and the reasons behind them *You can download the materials for free. *Please feel free to contact us first.

• Water treatment equipment

Incredible... Over 4,300 installations! Old piping can be kept without replacement thanks to rust prevention effects! We will introduce various case studies from different buildings all at once.

～Recommended for those who:～ ■ Want to continue using old piping ■ Do not want to cut or grind the piping ■ Prefer to avoid water outage construction ■ Do not want to spend much time or money...! The introduction cost is less than 1/5 to 1/10 of the cost of piping renewal! *Please download the PDF materials below to view the "Case Studies." *Feel free to contact us if you would like to know a rough estimate!

• Piping Materials

We have published numerous costs for when you actually implement it. We will provide a "cost comparison table" that clearly shows the comparison with the costs of updating piping!

~For those who are troubled by such issues~ ■ I don't have the money to rebuild or update the plumbing... ■ I want to quickly address the red water and plumbing clogs... ■ Water outage construction is quite a hassle... ★ Please download and view the PDF materials for the 'Case Studies' below. ★ Feel free to contact us if you want to know a rough estimate of the costs!

• Piping Materials

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.