Co-creation proposal! Added 'Sports Tech × Optical Thin Films' as a technology trend keyword.

Craftsman's Point: Achieved optical properties with a periodically varying refractive index. Application: Expected applications in notable fields such as Raman spectroscopy.

We will achieve optical characteristics that have not been realized before by periodically changing the refractive index. Conventional optical filters (optical thin films) consist of alternating layers of high-refractive-index and low-refractive-index films, which exhibit specific optical properties. In contrast, notch filters (band-stop filters) are deposition products designed to periodically change the refractive index in the thickness direction. A characteristic feature is that no optically unnecessary ripple occurs outside the stopband. We can achieve optical characteristics that were not possible with previous optical thin film processing. (Do you have such challenges?) ■ Is it possible to reflect only around the wavelength of 532nm? ■ I would like the unnecessary parts to be unable to transmit optically. ■ Notch filter? Band-stop filter? Rugate filter? ■ I have heard that the measurement difficulty after deposition is high; can you accommodate this?

• Other optical parts
• Color camera
• Sensors

It is an optical filter that selectively transmits light below a specific wavelength and blocks light of longer wavelengths.

The short pass filter selectively transmits light with wavelengths below a specific wavelength (800nm) while blocking light with longer wavelengths. This allows for effective handling of light in specific wavelength bands. (Do you have any of the following concerns?) ■ Is it possible to customize due to high wavelength dependence? ■ If light is incident at an angle, performance decreases; can it be controlled? ■ When blocking specific wavelengths, there may be a decrease in transmittance. ■ Can it cause chromatic aberration? ■ Is it difficult to control multiple wavelengths simultaneously?

• Other optical parts
• Color camera
• Sensors

It is a mirror that reflects light of a specific wavelength and transmits light of other wavelengths.

【1】Are you facing any of these issues? ◆ Is it possible to maintain a uniform reflectance for multiple wavelengths? ◆ Is it manageable if the reflectance decreases at specific wavelengths? ◆ Is color reproducibility achievable? ◆ Is there no problem with the stability of optical performance due to temperature changes or variations in environmental conditions? ◆ Is it possible to ship parts with a special shape? 【2】What is a dichroic mirror? A dichroic mirror is a mirror that reflects light of specific wavelengths while allowing other wavelengths to pass through. It consists of multiple layers, each with different optical properties. This characteristic allows for the effective separation, combination, or blocking of light at different wavelengths. 【3】Features of dichroic mirrors - Spectral separation Dichroic mirrors are used for spectral separation by selecting and reflecting or transmitting light of specific wavelengths from incident light. For example, they are used in optical devices that extract and detect light of specific wavelengths. - Light filtering They are used as filters to selectively remove light of specific wavelengths. This allows for the removal of unwanted light, enabling only the desired wavelengths to pass through.

• Other optical parts
• Distance measuring device
• Sensors

ND stands for "Neutral Density," which is a filter used to adjust the light transmission rate.

【1】Are you facing any of these issues? ◆ I want to address concerns about flares and ghosts. ◆ Is it possible to adjust the transmittance with a custom setting? ◆ I am looking for a filter for adjusting laser equipment. ◆ The shape is special; can it be shipped as a part? 【2】What is an ND filter? ND stands for "Neutral Density," which is a filter used to adjust the transmittance of light. It is attached to the lens to reduce the amount of light entering from outside. It is an essential optical component for controlling shutter speed and aperture in bright environments when taking photographs with cameras, in order to achieve the appropriate exposure. 【3】Design and customization available for your desired wavelength range At Adachi New Industries, we can design and coat (film) according to your desired wavelength range. The characteristic chart at the beginning shows a transmittance of 50%, but we can accommodate other transmittance levels as well. Please feel free to contact us. Additionally, we will design according to the characteristics of the substrate and your requirements, so please let us know your desired substrate type and wavelength range when you inquire.

• Other optical parts
• Distance measuring device
• Sensors

A bandpass filter that achieves sharp rise and high transmittance in the visible light range (660nm). It is ideal for red laser diodes and LED applications.

Are you having trouble with something like this? - Is it possible to only allow a specific wavelength (633nm) to pass through? - I would like to expand the stop band because light other than the desired wavelength becomes noise. - Can you take into account the range of incident angles? - The shape is special; can it be shipped as a component? Optical bandpass filters are used in various optical applications and are essential for selectively extracting light of specific wavelengths. Passband: An optical bandpass filter allows a specific range of wavelengths to pass through. This range of wavelengths is called the passband and is typically defined by the center wavelength and the wavelength bandwidth. Wavelength selectivity: Optical bandpass filters can have very high wavelength selectivity, emphasizing light of specific wavelengths. This is important in many fields where precise wavelength selectivity is required. A 660nm bandpass filter, which selectively allows light in the specific wavelength range of 660nm to pass through, is commonly used in optical applications. This bandpass filter amplifies or allows light within the wavelength range around 660nm while blocking light of other wavelengths.

• Distance measuring device
• Image Processing Equipment
• Sensors

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only transmit specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can you create a film for that? - Since light other than the desired wavelength will cause noise, I would like to widen the stop band. - Given the range of incident angles, can this be taken into account? - Is it possible to mount this on AGVs or OHTs? The 905nm bandpass filter is a filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our proven results in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (such as TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Distance measuring device
• Image Processing Equipment
• Sensors

Standard stock items include anti-reflective films, bandpass filters (BPF filters), and infrared cut filters (IR cut filters), among others.

We will start selling some optical thin film products (optical filter products) and patterned processing products as "standard stock items." We have responded to such requests! ◆ It's difficult to bear the cost of a whole batch when only a few pieces are needed for experiments... ◆ I want to see product development and performance tests quickly, so I need a few pieces at different levels... ◆ I just want to try it out for now... We often hear such voices through inquiries from our website. Even if custom-made filters are ultimately needed, I believe it is very difficult to define complete filter performance from the beginning.

• mirror
• Distance measuring device
• Sensors

Dear Sir/Madam, I hope this message finds you well and thriving. I would like to express my sincere gratitude for your continued support. We would like to inform you that our company will be closed for summer vacation during the following period: ■ Summer Vacation Period From Saturday, August 8, 2026, to Sunday, August 16, 2026. We will resume normal operations on Monday, August 17, 2026. Inquiries received during the vacation period will be addressed sequentially after the start of business. We apologize for any inconvenience this may cause and appreciate your understanding.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, the use of sheet piling methods is essential for safely utilizing the site, including temporary roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates have been widely used, but due to their weight, they can be cumbersome to transport, install, and remove. Hyper CLT sheet piles are civil engineering materials made from wooden CLT for civil use. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to handle with small machinery, contributing to reduced burdens during installation and improved work efficiency. They can be utilized in a wide range of civil engineering sites for measures against muddy conditions, ground protection, heavy machinery scaffolding, and ensuring pedestrian pathways. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A," it is also recommended as a material for innovative ideas, safety measures, and environmental considerations in public works.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!