Notice of Participation in the Ceramics Product Exhibition - "11th High-Performance Ceramics Exhibition [Osaka]" from May 13 (Wed) to May 15 (Fri), 2026.

Minimum aperture φ0.02mm; high-precision fine hole ceramics can be produced with a length of 100mm.

Pilot Corporation's ceramics can provide high dimensional accuracy for fine pores and deep holes of less than 1mm, which are difficult to manufacture through machining. Thanks to the expertise in mixing, extrusion molding, and firing developed in the production of mechanical pencil leads, we can achieve dense and homogeneous molding, resulting in minimal dimensional variation within the same lot. Additionally, we can produce single holes, multiple holes, and irregularly shaped holes. By utilizing high-precision fine holes, we enable precise microflow control. Our ceramics, which have excellent corrosion resistance, can also be used with corrosive liquids and gases. The materials used are high-purity alumina, zirconia, and aluminum nitride. 【Features】 ■ Capable of manufacturing fine ceramics with a minimum outer diameter of φ0.3mm and a minimum hole diameter of φ0.02mm ■ For inner diameters of less than φ1mm, we can produce long products with an aspect ratio of over 200 (maximum length of 120mm) ■ Free thickness can be achieved for deep holes, from thin to thick walls ■ High precision with a dimensional tolerance of ±5% *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Ceramics

Introducing ceramics manufactured through our unique extrusion molding, aimed at "smaller sizes," with outer diameters ranging from φ0.3mm to φ8mm and a minimum hole diameter of φ0.02mm.

Our company manufactures ceramics with small diameters and fine pores using extrusion molding technology developed through the production of sharp cores. We specialize in fine shapes and high precision, and we can produce outer and inner diameters with a dimensional tolerance of ±5%. Our products are used in various fields such as semiconductors, automotive, and medical industries. If you are facing challenges related to wear resistance, chemical resistance, heat resistance, or insulation in production equipment, tools, or product design, or if you are considering fine or micro-hole shapes and long materials, please feel free to consult with us.

• Ceramics

Can be utilized in processes that require wear resistance, insulation, and corrosion resistance. Achieves a small diameter of 0.5 to 2.0 mm.

Our company utilizes the technology cultivated in the manufacturing of mechanical pencil leads to produce fine, long-shaped ceramic products called "Zirconia Rods." Until now, we have offered these as original products, but in response to numerous requests, we have added standard products to our lineup. You can choose from four types with diameters ranging from 0.5 to 2.0 mm (in 0.5 mm increments). These are ideal for processes where "the use of metals is not suitable," such as those requiring wear resistance and insulation. They can also be used as materials for manufacturing components of precision equipment that are becoming smaller. 【Features】 ■ Capable of producing high-density molded bodies through our unique kneading, extrusion molding, and firing technology ■ Provides a smooth surface with an Ra of approximately 0.2 due to extrusion molding ■ Short lead times are possible because of domestic manufacturing ■ Sold stored in a dedicated slide tray that is easy to retrieve and has excellent preservation properties *For more details, please download the materials or feel free to contact us.

• Ceramics

High-precision processing with ±1μm accuracy supports a variety of parts and materials such as discharge guides and positioning pins.

In recent years, there has been a trend towards miniaturization of products, leading to a demand for precision processing of small components. Do you have any concerns regarding this? Our company, "Secondary Process Products," performs secondary processing on high-density, high-strength, and high-purity fan ceramics with sub-micron precision machining. We also accommodate high-precision surface finishing and the assembly of sleeves and parts with special hole diameters. 【Features】 - Capable of producing small diameters of less than 1mm with an aspect ratio of over 200. - Fine and high aspect ratio holes that penetrate in the extrusion direction. - Can be manufactured with a freely adjustable wall thickness, from thin to thick. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Processing Contract

For controlling the flow rate of gases and liquids. Achieving stable flow and reduced pressure loss.

The pilot's "porous ceramics" can create numerous through-holes for extrusion molding. It is possible to mold thin ceramics with a minimum outer diameter of φ0.3 mm, fine-pore ceramics with a minimum pore diameter of φ0.02 mm, and through porous ceramics with over 100,000 holes. These are used in fields such as analysis, automotive, and semiconductors. 【Features】 ■ Even for pores with a diameter of less than 1 mm, it is possible to produce items with an aspect ratio of over 200. ■ High aspect ratio holes are penetrated in the extrusion direction. ■ Since the holes are straight and pass through a dense body, stable flow rates can be achieved. *For more details, please refer to the product catalog available for PDF download. Feel free to contact us with any inquiries.

• Ceramics

It is possible to manufacture small-diameter rods and fine-pore pipe shapes.

Generally, there are many flat or sheet-like products, but are there any parts that require rod or pipe shapes? Our "Aluminum Nitride" utilizes the extrusion molding technology of mechanical pencil leads and can be produced in aspect ratios of 200 or more. "Aluminum Nitride" possesses an extremely high thermal conductivity among ceramics and is an excellent material for electrical insulation and thermal radiation. The available sizes can be manufactured in an outer diameter of φ0.5 to φ6.0, an inner diameter of φ0.02 to φ4.0, and a length of 100mm. [Features] ■ For parts requiring heat dissipation ■ Superior thermal conductivity compared to alumina and zirconia ■ Capable of forming small-diameter pipes with fine pores *For more details, please refer to the materials. Feel free to contact us as well.

• Ceramics

Ceramics such as zirconia and aluminum nitride can be manufactured, focusing on high-purity alumina.

The pilot utilizes the extrusion molding technology of sharp cores and conducts consistent production within Japan. They excel at creating ceramics that are long and thin, with fine holes, similar to sharp cores, using their unique molding technology. They offer high-purity alumina, zirconia, and aluminum nitride with outer diameters ranging from φ0.2 to φ8, inner diameters starting from φ0.005, and lengths of approximately 120mm. Additionally, they can provide single-hole, multi-hole, and porous bodies. Combinations of different outer and inner shapes are also possible. 【Features】 - Manufactured using extrusion molding technology for sharp cores - Specializes in small diameter sizes that are considered difficult to produce in rod or pipe shapes - Capable of molding from fine single holes to multi-holes through extrusion - Optimization in all processes, starting from raw materials - High-precision products can be provided

• Ceramics

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.