Renewed the kitchen exhaust deodorization site to "kitchen-smell-countermeasures.com".

No power supply needed, just connect to the exhaust duct. A commercial deodorizing device that can be easily installed and start tackling odors from the same day. It effectively suppresses unpleasant cooking odors and deodorizes efficiently.

This is a deodorizer specifically designed for small to medium-sized kitchen exhaust systems in restaurants, supermarkets, daycare centers, convenience stores, and similar establishments. It sends plant essential oil deodorants into the exhaust duct to neutralize cooking odors that cause unpleasant smells. Since the deodorant is in gas form, there is almost no pressure loss in the duct, and there is no need to significantly change the capacity of the existing fan. Starting with the 4SII, which can be quickly and easily installed on the side of the duct, it can also flexibly adapt to sites with round ducts or where installation space is limited. The deodorant is a complete gas and contains no moisture, so it does not cause rust or damage to the equipment inside the duct.

• Other environmental equipment
• Ventilation and Exhaust
• Other air conditioning equipment

For deodorizing odors emitted from ducts in food processing plants, meal centers, painting factories, etc. No power supply needed and easy to install afterward! Refreshingly eliminates unpleasant odors.

No power supply needed, just connect to the duct. This is a commercial deodorizer that does not put a load on existing equipment. It can be used not only for odor control in various factories but also for finishing odors that could not be eliminated by other deodorizing devices. The 'VFD-N/TM' is a basic type of neutralizing deodorizer that can efficiently mix deodorizing agents into the exhaust duct. It effectively deodorizes foul-smelling substances using plant essential oil deodorants. 【Case Studies】 ■ Food manufacturing factories, school lunch centers ■ Paint and printing ink manufacturing factories ■ Automobile repair shops, foundries ■ Fertilizer manufacturing factories, etc. ■ Kitchens in hotels, supermarkets, hospitals, etc. *For more details, please click the link or feel free to contact us.

• Gas recovery/treatment equipment
• Other environmental equipment
• Ventilation and Exhaust

Recommended for exhaust and outdoor odor control! A compact commercial deodorizing device that can improve various odors.

The "DMD Series" is a commercial deodorizer that vaporizes plant essential oils to neutralize and eliminate unpleasant odors. Its portable size (332W×150D×243H) and lightweight design (approximately 5kg) make it highly praised for installation in limited spaces. It is widely used not only in various factories such as livestock facilities, printing and painting factories, food factories, and composting plants, but also in restaurants with strong kitchen exhaust odors, such as yakiniku (grilled meat) restaurants, Italian restaurants, and rich ramen shops. Safety complies with IFRA standards, allowing for safe diffusion in spaces with workers present. Since the deodorizer spreads as a gas, installing it within a factory can improve the indoor environment while also addressing unpleasant odors in the surrounding area. 【Features】 ■ Compact yet capable of handling high-concentration odors ■ Suitable for outdoor odor control without partitions ■ The number of deodorizing molecules is over 1,000 times that of spray methods ■ Very low initial cost ■ Easy to install ■ Deodorization tests can be conducted with temporary installation (depending on the site; please consult us) ■ Rental options for limited-time use are available *For more details, please click the link or feel free to contact us.

• Other painting machines
• Other environmental equipment
• Ventilation and Exhaust

The gas phytoncide deodorization system "Neutralization Deodorization" is a commercial deodorizer that can be installed without burdening air conditioning and exhaust equipment. A thorough explanation of its features!

Phytoncide," which is generated from the leaves and trunks of trees and contains components for deodorization and mold prevention. Our company has developed a deodorization method called 'Neutralization Deodorization,' which vaporizes this component and allows it to come into contact with odors. Thanks to the advantage of being in gas form, it eliminates concerns associated with liquid deodorants, such as "load on air conditioning systems" and "installation of auxiliary equipment," and it has been adopted for odor control nationwide. 【Three Functions of 'Neutralization Deodorization'】 1. Odor substances and plant essential oils undergo a chemical reaction, transforming into odorless substances. 2. When odors and plant essential oils coexist in a certain ratio, the mixed odor becomes odorless or nearly odorless. 3. The unique fragrance of plant essential oils masks any remaining odors. ★ Our company is currently offering free materials that explain the benefits of 'Neutralization Deodorization!' Please request the materials from the following page: https://deodor.co.jp/catalog.html#etc

• Other environmental equipment
• air conditioning
• Other air conditioning equipment

In civil engineering sites, in addition to construction feasibility and safety, material selection that takes environmental considerations into account is required. Materials used for temporary roads, access roads, heavy machinery work yards, and material storage areas are now focusing not only on traditional steel plates but also on materials that can contribute to reducing environmental impact. Hyper CLT sheets are civil engineering CLT materials made from wooden CLT. Because they utilize wood, they are characterized by their ability to easily connect to proposals that consider site environments, such as CO2 fixation, glare reduction, and noise reduction. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to handle even with small machinery, thus helping to reduce the burden of transportation, installation, and removal. Furthermore, they can be used in a wide range of applications as an alternative to steel plates for measures against muddy conditions, ground protection, and ensuring work pathways. In public works, they are also easy to propose as materials that demonstrate the adoption of environmentally friendly materials and ingenuity during construction, which can lead to improved site evaluations. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they can also be utilized as materials for proposals on creativity and environmental measures in public works. We recommend them as a new alternative to steel plates for companies considering environmental considerations, NETIS, civil engineering utilization, and civil engineering CLT. Please feel free to consult us.

Hello everyone! We are Nikken Coating Industry Co., Ltd., a specialized manufacturer of contract processing for fluororesin coatings and PEEK coatings. Thank you very much for visiting our booth at the recent "Mechanical Elements Technology Exhibition." Thanks to you, we were able to conclude the event successfully. At the exhibition, we proposed surface treatment solutions for the "five challenges (release, sliding, corrosion resistance, impurity measures, and environmental response)" that arise in manufacturing sites. Were there any technologies that caught your interest? ■ We are currently responding to inquiries made at the venue We are sequentially contacting those who made technical inquiries or requests for prototypes at our booth on the day of the event. If you have requests such as "I would like you to look at additional drawings" or "I need a quote urgently," please feel free to let us know. ■ For those who could not attend the exhibition or missed our booth We also welcome inquiries from customers who could not come to the venue, such as "coating for special shapes that other companies have declined" or "switching from existing coatings." If you have any concerns regarding "surfaces," please feel free to consult or contact us.

The particle visualization technology developed under our brand "ViEST" has a very high level of detection sensitivity that allows for real-time visualization of the suspended and adhered states of micro and nano-sized particles. We are engaged in the sale of visualization systems and contract services for evaluation (investigating particles and airflow in production processes, manufacturing equipment, and factory environments, evaluating the performance of cleaning products, proposing yield improvement measures, etc.) both domestically and internationally. In manufacturing environments, invisible fine foreign substances, dust generation, particle adhesion due to static electricity, and airflow disturbances can lead to quality defects and reduced yield. Our company clarifies these contamination factors through visualization technology and provides consistent support from identifying the source of the problem to considering and confirming improvement measures. Do you have any of the following concerns? - Unable to identify the cause of foreign matter contamination - Want to check airflow and cleanliness in clean rooms - Want to understand dust generation from manufacturing equipment and transport systems - Want to reduce particle adhesion to films and substrates - Want to improve contamination that causes yield reduction

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.