We will be exhibiting at "MEX Kanazawa 2026 (62nd Kanazawa Machine Industry Exhibition)."

The design currently under patent application allows for easy visual confirmation of the coolant's condition, which also helps extend the lifespan of both the tool and the coolant.

The Abanaki Oil Boss is an innovative tool that keeps coolant oil-free. Its portability and magnetic base reduce production loss and maintenance time, making it easy to clean various samples and tanks around factories and workspaces. 【Features】 - Can be installed anywhere in the factory thanks to the magnetic base. - The reversible design prevents tangling of hoses and cords. - Lightweight and easy to carry. - Easy oil collection and discharge, making cleaning simple. - Does not require floor space. - Tubes, mops, discs, and belts do not wear out. The filtration material can be easily cleaned and reused. - Removes floating oil that traditional skimmers cannot eliminate.

• Other environmental equipment
• Other filters

[Example] Application of tapping processing using horizontal machining!!

[Case Study] Introduction of tapping processing using horizontal machining!! - Before Improvement For taps with short protrusions, it was difficult to aim for a pinpoint from the upper side of the tool's groove due to water splashing on the arbor or workpiece. - After Improvement By using elbows and conversion joints to avoid interference with the ATC and tool temporary storage, and by allowing for flexible bending, we were able to hit the target area precisely. Successfully cooled the tool and workpiece at pinpoint locations. This led to improved finishing of the workpiece and extended tool life.

• Other machine tools
• Other processing machines

Can be combined according to the whetstone.

【Features】 This is a specially designed slot and tube nozzle for grinding applications that can accurately supply coolant to the contact point between the grinding wheel and the workpiece, with minimal diffusion.

• nozzle
• Piping Materials

Efficiently changing nozzles and iron pipes through quick changeover.

**Features** ■ Quick Position Connection The quick change system uses a ball locator method, where pulling back the outer sleeve releases the coupling on the OS side. Once connected, rotation is locked, and nozzle readjustment is unnecessary. Simply connect the steel coolant nozzle and copper pipe to the coupler to complete the installation. This enables rapid setup changes and tool exchanges. ■ Quick Position Connection This new system consists of two parts, with one part being screwed into the other. The outer diameter has a knurled finish (anti-slip processing) to allow for hand tightening and loosening without tools. It has no play and is suitable for connecting numerous joint components. Installation is complete by simply connecting the steel coolant nozzle. It supports high-pressure coolant up to 70 Bar. This enables rapid setup changes and tool exchanges.

• nozzle
• Piping Materials

Compact design magnet filter. Just install it in the piping! Sludge removal is also easy.

The "Micromag" is a magnetic filter that can remove fine iron particles at a submicron level simply by being attached to existing piping. The patented "magnetic circuit design" prevents pressure drops during use! The cover is transparent, allowing for visual confirmation of sludge conditions. It is ideal for use in machine tools such as grinding machines, machining centers, and lathes, contributing to the longevity of pumps and filters. 【Features】 ■ Economical due to minimal consumables ■ Uses 4500 Gauss neodymium magnets ■ Easy removal of sludge ■ No electricity required ■ Capable of removing some particles that do not adhere to abrasives or magnets due to heterogeneous coagulation *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other machine tools
• Machining Center

Simultaneous back and double-sided machining!! This labor-saving tool allows for back machining, which is impossible with conventional tools, as well as double-sided machining, all in one process!

● The deburring tool is the definitive labor-saving tool that allows for both back deburring and simultaneous double-sided deburring in a single process, which is impossible with conventional tools. ● You can perform back deburring and double-sided deburring in one pass while the spindle rotates in the forward direction. ● No skill is required at all. ● It is most suitable for multi-axis operations. ● It can be used on a variety of materials, from aluminum to stainless steel. ● No special tools are required.

• Other cutting tools
• Other work tools

Ideal for removing burrs and surface edges! For deburring and chamfering cross holes, pipes, tubes, liners, housings, flanges, and more.

● The bar-off tool (chamfering tool for cross holes) is a chamfering tool for cross holes. ● It can remove troublesome burrs and thread surfaces on both sides of cross holes. ● The bar-off tool was developed as a chamfering tool for mass production processing in dedicated multi-axis machines. ● Since the bar-off tool is integrated, there is no need for troublesome adjustments, and there are no concerns about the issues of traditional deburring tools, such as chips getting stuck. ● The bar-off tool can be re-sharpened about 4 to 5 times, and the tool life depends on the material being machined, ranging from 5,000 to 15,000 holes.

• Other cutting tools
• Other work tools

Cross holes and oval shapes can be easily backed. Compatible with a wide range of materials such as aluminum and stainless steel.

The "Orbital Tool" that we handle is a deburring tool capable of removing burrs from cross holes and oval shapes. It can be used with simple setup and programming. It accommodates a variety of work materials, from aluminum to stainless steel. It features no secondary burr generation and comes with a protective disc, ensuring that the inner surfaces of the workpiece are not damaged. 【Features】 ■ Capable of deburring cross holes with diameters of φ2mm and φ2.5mm ■ Supports angles of 90°, 60°, 45°, and 30° for cross holes ■ Suitable for hole diameters from φ1.3mm to φ51mm ■ Reference tool life is approximately 50,000 holes for aluminum and about 30,000 holes for steel ■ We also customize tool extensions and shank diameter changes to meet customer needs, so please consult with us. Photos 1. Comparison of both sides and one side 2. Deburring case 3. Comparison of standard type and special type 4. Tool extension with extension tool *For more details, please refer to the materials. Feel free to contact us. *Meetings via Zoom are also possible.

• Other cutting tools
• Other work tools

We are pleased to announce the upcoming webinar "Analytical Instruments Course - Basic Edition." This course is designed for anyone who will be involved in analytical work starting this spring, as well as those who wish to revisit the principles of analytical methods. This time, we will explain sulfur, nitrogen, and chlorine analysis instruments, as well as total organic carbon analysis instruments. If you are interested, please register for participation through the details and registration button. Start times: 14:00 - Nitrogen, Sulfur, and Chlorine Analysis Instruments 15:00 - Total Organic Carbon Analysis Instruments

We are pleased to announce the upcoming webinar "Analytical Instrument Course - Basics Edition." This course is designed for anyone who will be involved in analytical work starting this spring, as well as those who wish to revisit the principles of analytical methods. We believe that everyone will find the content satisfying. If you are interested, please register for participation using the application button. This time, the program will be held as follows: 1:00 PM - Microwave Sample Digestion System 2:00 PM - Atomic Absorption Spectrophotometer 3:00 PM - ICP Emission Spectrometer

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely invite you to visit us during this busy time. 【 Exhibition Name 】 Automotive Technology Exhibition 2025 YOKOHAMA https://aee.expo-info.jsae.or.jp/ja/yokohama/ (An "online exhibition" will also be held during and around the event period) 【 Dates 】 May 21 (Wednesday) - 23 (Friday), 2024 10:00 AM - 6:00 PM *On the final day, 9:00 AM - 4:00 PM (Online exhibition: May 14 (Wednesday) - June 4 (Wednesday)) 【 Venue 】 Pacifico Yokohama (1-1-1 Minatomirai, Nishi-ku, Yokohama, Kanagawa Prefecture) Our booth number: "Concourse 505"

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 27th INTERPHEX Week Tokyo https://www.interphex.jp/tokyo/ja-jp.html 【 Dates 】 July 9 (Wednesday) - 11 (Friday), 2025 10:00 AM - 5:00 PM 【 Venue 】 Tokyo Big Sight (3-11-1 Ariake, Koto-ku, Tokyo 135-0063)

The next official Yocto Project practical course (LFD461-JP) is scheduled to be held over three days from June 9 (Tuesday) to June 11 (Thursday), 2026. This practical course integrates the knowledge and know-how gained from Yocto-related development, support, and seminars conducted by Lino. We encourage companies that want to learn Yocto or utilize it more effectively to consider participating.