Oden Corporation Factory Air Purifier Video Now Available

A product with a processing air volume of 50m³/min as a higher model of HG311!

The HG511 is an industrial air purifier equipped with two dust collection units measuring 470mm square. As a higher model than the HG311, it achieves an airflow rate of 50m³/min. Its applications are the same as those of the HG311, but it meets a wider range of needs. It is well-suited for cleaning the entire factory as a broad-area application. The dust collection method employs a needle discharge system. 【Specifications (partial)】 ■ Model: HG511 ■ Power supply: 3-phase AC200V (50/60Hz) ■ Power consumption: 370W (50Hz) / 500W (60Hz) ■ Airflow rate: 45m³/min (50Hz) / 55m³/min (60Hz) ■ Dust collection method: Needle discharge system *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

It effectively cleans oil mist and dust in the factory with high static pressure and more power!

The "HG220" is an air purifier designed for direct connection or local use with a φ200 duct. It has high static pressure and effectively cleans oil mist and dust in factories with greater power. It is suitable for direct and local applications. Airflow adjustment can be made in five stages, and it employs a needle discharge method for dust collection. 【Specifications (partial)】 ■ Model: HG220 ■ Power supply: AC200V (single phase) ■ Power consumption: 300W ■ Processing airflow: 22m³/min ■ Airflow adjustment: 5-stage adjustment ■ Dust collection method: Needle discharge method *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

Adopts a horizontal airflow mechanism with high air circulation efficiency! Ultra-thin design with a ceiling-mounted dimension of 20cm.

The "TZ4000" is a ceiling-mounted air purifier. It draws in dirty air from the bottom of the unit and blows out clean air from two directions on the sides. Because the air can reach far, it improves the overall air circulation in the room, enhancing the purification effect. It features an ultra-thin design with a ceiling installation dimension of 20 cm, allowing it to be embedded in narrow ceiling spaces. It can accommodate areas where there is limited space for other equipment to be installed in the ceiling. 【Features】 ■ Adopts a horizontal blowing mechanism with high air circulation efficiency ■ Ultra-thin design with a ceiling installation dimension of 20 cm, suitable for narrow ceiling spaces *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.