Added ITO/Near Infrared AR Coat to the Aronics sheet.

It is a special anti-reflective coating (AR coat) that can have peaks at multiple wavelengths. It is a filter that can be optimally designed for various optical devices.

【1】Are you facing any of these issues? ◆Is there a way to prevent reflection by matching the wavelength of CDs, DVDs, and Blu-rays? ◆Is there a method to improve visibility and achieve clear image quality? ◆Is it possible to design and fabricate custom solutions? ◆I want to increase light output to contribute to energy savings. ◆Can we design an anti-reflective coating (AR) that takes the angle of incidence into account? 【2】Features of Adachi New Industry's dual-wavelength AR (anti-reflective coating) 1) Multi-layer structure: The three-wavelength anti-reflective coating consists of multiple dielectric thin film layers. 2) Selective anti-reflection: It exhibits a high anti-reflection effect for specific wavelength ranges of light. Reflection of specific light is suppressed, improving the visibility of devices and displays. 3) Wide wavelength range compatibility: The three-wavelength anti-reflective coating is generally effective across a wide wavelength range, spanning the visible light region and near-infrared region. It can deliver high performance against light from various light sources. 4) Advances in thin film technology: It has been improved through advancements in thin film technology. With advanced manufacturing techniques and material selection, it is applied to compact devices and displays.

• Other optical parts
• lens
• Sensors

It is an optical filter that selectively transmits light below a specific wavelength and blocks light with longer wavelengths.

The short pass filter selectively transmits light below a specific wavelength while blocking light of longer wavelengths. This allows for effective handling of light in a specific wavelength range. (Do you have any of the following concerns?) ■ Is it customizable due to its high wavelength dependence? ■ If light is incident at an angle, will performance decrease, and can it be controlled? ■ When blocking a specific wavelength, there may be a decrease in transmittance. ■ Can it cause chromatic aberration? ■ Is it difficult to control multiple wavelengths simultaneously?

• Other optical parts
• Color camera
• Sensors

It is a high light-transmitting ITO coating that combines an ITO film (transparent conductive film) with a dielectric multilayer anti-reflective film. It prevents condensation while allowing high transmission.

- Achieving both excellent transparency characteristics and static electricity prevention functions with ITO. We can apply anti-reflective coating that is most suitable for the wavelength range according to your desired specifications. Furthermore, we can also coat metals such as aluminum or nickel on top of the ITO film with good adhesion, making it suitable for sensors that require electrodes on the glass surface. Are you facing any of these issues? - Can you coat a film that allows both light and electricity to pass through simultaneously? - Is it possible to apply anti-reflective functionality? - Can pattern processing be done after coating with ITO? - Is it possible to focus on resistance value in the coating?

• Other optical parts
• Surveillance Cameras
• Sensors

It is an optical thin-film filter that reduces the reflectance at specific wavelengths and improves transmittance. By increasing the amount of light, it contributes to energy saving and power reduction.

Light reflects at the boundary surface with air, causing 4% reflection on one side and 8% reflection on both sides of the glass, resulting in a reflection of one's own image. An anti-reflective coating (AR = Anti Reflection Coating) is an optical thin film that utilizes the principle of interference by alternately depositing dielectrics with different refractive indices, reducing the reflectance of specific wavelengths and improving transmittance. Are you facing any of these issues? - Want to reduce reflections and ghosting in window materials? - Is there a way to improve visibility and achieve clearer image quality? - Looking to reduce internal reflections and prevent flare? - Want to increase light levels to contribute to energy savings? - Can we design an anti-reflective coating (AR) that takes the angle of incidence into account?

• Other optical parts
• lens
• Sensors

The applications of Hyper CLT sheets are not limited to specific locations. Essentially, many civil engineering sites that have previously used steel plates are candidates for consideration. Wood CLT can be utilized in various places such as temporary roads, access routes, heavy machinery work yards, material yards, storage areas, temporary parking lots, and worker pathways. Of course, there are cases where steel plates are more suitable depending on site conditions, such as in areas with heavy loads or where heavy machinery needs to turn. The important thing is not to replace everything, but to use them appropriately according to the ground conditions, machinery, and intended use. Hyper CLT sheets are lightweight, easy to install and remove, and have unique characteristics of wood, such as reducing glare and metallic sounds, and fixing CO2. Furthermore, it is a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A."** By utilizing wood, NETIS, civil engineering, and CLT, it provides a new option for places that have previously used steel plates.

Event Date: October 7 (Wednesday) to October 9 (Friday), 2026 Time: 10:00 AM to 5:00 PM Venue: Intex Osaka Our company will be exhibiting at the 29th Monozukuri World Design and Manufacturing Solutions Exhibition, which will be held at Intex Osaka from October 7 (Wednesday) to October 9 (Friday), 2026. At the venue, we will showcase the upgraded "ReMacs Hybrid," as well as the eagerly awaited production management system for the precast concrete industry, "ReMacs TypePca," which will be unveiled for the first time following its release at the end of May! We will also display various solutions, including the newly equipped "AI Drawing Search System" with OCR functionality! We sincerely look forward to your visit.

In civil engineering sites, it is important to clearly communicate not only safety and workability but also "what kind of initiatives the site is undertaking." Hyper CLT mats are civil engineering mats that utilize wood CLT. They look significantly different from conventional steel plates, so when laid at site entrances, viewing routes, or material yards, they create a strong visual impact. In particular, during inspections by clients, site tours, and public open days for local residents, the use of wood, environmental considerations, and the application of new technologies can be conveyed in a "visible form." Additionally, they are lightweight and easy to install and remove, and they offer practical benefits such as reducing glare and metal noise, as well as CO2 fixation. Hyper CLT mats are registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." They combine wood, NETIS, civil engineering, and CLT, making them a new temporary material that can impressively convey the initiatives of the site.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Piab Group has proudly celebrated its 75th anniversary. We would like to express our heartfelt gratitude to our customers and partners who have supported us over the years. As we reach this milestone of 75 years, we reflect on our journey with appreciation and continue to strive to provide better solutions while staying close to our customers' needs. We look forward to your continued support for Piab.