KELLER will exhibit at the International Space Business Expo SPEXA! May 27-29, 2026, at Tokyo Big Sight, South Hall 3-4, S8-40.

Small pressure sensor with welded structure covering from 0 to 10 kPa up to 0 to 100 MPa!

The welded structure small pressure sensor 23SY/25Y is designed to meet the advanced and diverse requirements of industrial applications, including pressure range, pressure connection, output signal, and electrical connection (25Y features a flush diaphragm structure). The modular concept allows for high flexibility in specifications and enables quick response times. A temperature sensor is integrated into the circuit, correcting errors caused by temperature changes and contributing to improved overall accuracy. We can also offer intrinsically safe explosion-proof types 23SYEi and 25YEi. 【Features】 - Wide temperature compensation: ± 0.7 %FS @ -10 ~ 80℃ - Minimum pressure range starting from 10 kPa - Excellent long-term stability - Robust SUS housing - Option: Intrinsically safe explosion-proof type (23SY-Ei) 【Technology】 - Piezo-resistive pressure sensor - Welded structure without internal seals - Analog output: 4 ~ 20 mA, 0 ~ 5 V, 0 ~ 10 V, etc.

• Pressure

Ultra-compact pressure sensor with a minimum diameter of 17mm, covering from 0 to 200kPa up to 0 to 100MPa!

The pressure sensor series 21Y features a welded structure that does not use internal seals. It has an insulation voltage of 300VDC, making it less susceptible to disturbances. A temperature sensor is integrated into the circuit to correct output errors caused by temperature changes, resulting in improved overall accuracy and TEB. 【Features】 • Wide range of temperature compensation • Ultra-compact, ideal for applications with limited installation space • Robust SUS housing • Excellent long-term stability 【Technology】 • Piezo-resistive pressure sensor • Welded structure without internal seals • Compact with analog output: 4–20mA, 0–10V, etc.

• Pressure

High-precision pressure sensor with RS485 digital output. Atmospheric pressure range (800 to 1200 hPa) is also available!

The pressure sensor 33X achieves an extremely high accuracy of 0.05% full scale (FS) in the temperature range of 10 to 40°C through a mathematical correction method. An additional option for high precision of 0.01% FS is also available. In addition to a digital RS485 interface, analog current or voltage outputs can be obtained. 【Features】 - Accuracy of ±0.05% FS in the temperature range of 10 to 40°C - Standard dual outputs of digital RS485 and analog output - Analog output can be range-adjusted via digital RS485 - Available in barometric range type (800–1200 hPa) and differential pressure range type (from 0–30 kPa to 0–3 MPa) - Temperature range of -20 to 125°C (optional -40°C also available) - Excellent long-term stability 【Technology】 - Piezo-resistive pressure sensor - Correction technology using a mathematical model to produce accurate pressure values

• Pressure

Ideal for measuring pulsations and unsteady behavior with a bandwidth of 50 kHz, temperature-resistant up to 180°C, built-in amplifier (0-10V output) high-precision pressure sensor.

The ultra-high-speed pressure sensor M5HB can measure not only static pressure but also pressure changes within a bandwidth of 0 to 50 kHz. This is achieved by the digital circuit continuously adjusting the analog signal in real-time, with an output of 0 to 10V. The compact sensor head with M5 fine thread can be used at temperatures up to 180°C. It has a pressure resistance of up to five times the measurement range and is an excellent model for vibration resistance. 【Features】 - Temperature resistance of the sensor head: 180°C - Output is an analog signal of 0 to 10V (with built-in amplifier) - Wide temperature compensation range: -20 to 125°C or -40 to 180°C - Bandwidth of 50kHz, ideal for measuring pulsations and unsteady behavior - Resistant to impacts and vibrations - Compact design, pressure connection is M5×0.5 fine thread

• Pressure

±0.05% accuracy / Digital pressure gauge with logging function, explosion-proof type available

The high-precision digital pressure gauge LEO Record can record pressure and temperature for extended periods thanks to its memory function. The data logger can be connected to a computer via an RS485 interface for reading the recorded data. The current pressure value can be displayed in multiple pressure units. It is powered by a 3.6V lithium battery. An intrinsically safe explosion-proof type is also available. 【Features】 - Can record pressure and temperature for long periods - High precision (±0.05%FS @ 20–25 °C) - Ultra-low power consumption, long battery life - Can display in various pressure units (bar, mbar, hPa, kPa, MPa, PSI, kg/cm2, cmH2O, mH2O, etc.) - Zero point calibration via button - Intrinsically safe explosion-proof type available

• Pressure

When adopting new civil engineering materials, it is important not only to consider performance but also to ensure that clients and designers can easily verify information. Our Hyper CLT panels are registered technologies with the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) under NETIS, with registration number "TH-250021-A." Additionally, they are registered with NNTD, which publishes technical information in the field of agricultural and rural development. In NNTD, they are listed as technologies that can be utilized for agricultural roads, drainage channels, field improvements, material storage areas, and temporary roads. They can also serve as information for considering new panels in agricultural civil engineering and rural development sites. Hyper CLT panels are wooden lightweight panels made from CLT (Cross-Laminated Timber) that is laminated in the orthogonal direction. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them relatively lightweight and easy to install, remove, or relocate depending on site conditions. Wooden panels, NETIS, civil engineering, CLT, wooden lightweight panels. Through registration with NETIS and NNTD, Hyper CLT panels are expanding new options not only in general civil engineering but also in agricultural and rural development sites.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)