We will exhibit at the "2026 Automotive Technology Exhibition" in YOKOHAMA.

"The convenience of plastic and the eco-friendliness of biomass" - Bio-based composite resin blended with wood-derived cellulose that contributes to sustainability

*During the process from resin manufacturing to incineration, the CO2 emissions of GREEN CHIP CMF, containing 55% cellulose fiber, are expected to be reduced by approximately 35% compared with petroleum-derived ABS resin and by approximately 20% compared with petroleum-derived PP resin. (*1, *2). *Cellulose fiber functions as a reinforcing material, improving tensile strength, flexural strength, flexural modulus, and heat resistance (heat load deflection temperature) compared with unreinforced PP resin. This makes it possible to make molded products thinner and, therefore, contributes to weight reduction. *By adding GREEN CHIP CMF to recycled resin as a modifier, physical properties such as strength, elastic modulus, and heat deflection temperature can be improved, thereby contributing to increased use of recycled resin. *Despite containing 55% cellulose fiber, it achieves flowability equivalent to PP resin and delivers excellent moldability. Existing molds can be used, and the material exhibits low molding shrinkage and excellent dimensional stability. *1 Calculated in-house based on the results report of commissioned work to Osaka University by the Ministry of the Environment (FY2019). *2 Calculated in-house based on the Ministry of the Environment’s "Guidelines for the Utilization of Cellulose Nanofibers."

• Composite Materials

Improved adhesion strength and sealing properties without curing process by mold temperature and sealability during resin molding. Surface modification and potting are not required

[Features] - Improving sealing and adhesive performance without curing process due to mold temperature and heat during resin injection molding - Because the tape itself is slightly sticky, temporary lamination with metal insert materials is possible at room temperature - No surface modification or potting - Applicable to various materials Metals: Aluminum, stainless steel, copper, steel, etc. Resin: PPS, PBT, PA, etc. [Application] - Insert molded products such as connectors, bus bars, and terminal blocks - Resin and metal composite parts such as car interior panels

• Vehicle body parts
• Other Auto Parts

Highly filled composite material sheet containing inorganic fibers and powders, developed using advanced papermaking technology refined over many years

[Features] - Thin inorganic fiber sheet holding functional powder - Excellent low thermal conductivity and high thermal insulation - Thinness available to be combined with other sheet materials [Application] - Measures against ignition and heat generation for various batteries - Partial insulation of industrial equipment

• Secondary Cells/Batteries
• Lithium-ion battery

Enable usage in environments up to 1600°C

These products are sheets made by adding a small amount of organic binder to various inorganic (ceramic) fibers such as rock wool, AES (alkali Earth Silicate) fiber, alumina fiber, and others. It equipped with cushioning and flexibility and can be customized to a range of thicknesses and hardness levels. * Since these products contains an organic binder, smoke or gas may be generated during initial heating.

• Ceramics

By forming sheets using papermaking technology, we combine the characteristics of the material with the flexibility, processability, and porosity unique to paper

TOMOEGAWA designs and develops various functional materials according to customer requests. We create sheets with a variety of functions through contract manufacturing or collaboration using customer-supplied or specified materials. Customization of various properties is also possible by controlling fiber diameter, thickness, and porosity. Please share your requirements with us.

• stainless
• Other metal materials
• Ceramics

A sheet that possesses heat resistance up to approximately 800°C as well equipped with cushioning and flexibility. We respond to a wide range of thickness and hardness requirements.

Features 1: Excellent heat resistance - Primarily composed of rock wool, offering heat resistance up to 800°C. Features 2: Low Shot Content - Compared to general rock wool (slag wool) products, it contains less shot (un-fiberized material), resulting in a smooth surface. Features 3: processability and Flexibility Can be easily cut with scissors or a cutter. The hardness of the sheet can be controlled, making it possible to meet needs such as punching and winding properties. *For physical property technical data, please refer to the detailed information. - Sheet thickness: 1 to 6mm - Sheet width: 630 mm to 1,260 mm *For details regarding thickness, width, or length other than those listed above, please feel free to contact us. *Please note that smoke or gas may be generated during initial heating due to the inclusion of organic binder.

• Heating device
• Ceramics
• Heat exchanger

A sheet material primarily composed of alumina fiber (PCW/crystallized alumina short fiber).

Features 1: Excellent heat resistance - Primarily composed of alumina short fibers (PCW), offering heat resistance up to 1600°C. Features 2: Low Shot Content - With an extremely low content of shot (un-fiberized material), the sheet has a smooth surface. Features 3: processability and Flexibility Can be easily cut with scissors or a cutter. The hardness of the sheet can be controlled, making it possible to meet needs such as punching and winding properties. - For detailed technical data, please refer to the additional information provided. - Sheet thickness: 0.5–6 mm - Sheet width: 630 mm to 1,260 mm. *For additional thicknesses, widths, lengths, or other detailed specifications not listed above, please feel free to contact us. * Because this product contains an organic binder, smoke or gas may be generated during the initial heating process.

• Heating device
• Fine Ceramics
• Heat exchanger

A sheet primarily composed of alkali Earth Silicate fiber (AES fiber/biocompatible soluble fiber), that possesses heat resistance up to approximately 1100°C to 1300°C.

Features 1: High heat resistance - Mainly composed of alkali Earth Silicate fibers, heat resistance of 1100°C to 1300°C. (The primary fiber can be selected according to the temperature range.) Features 2: Shot Amount Control - Removal processing of shot (un-fiberized material) contained in the bulk fiber is available. Features 3: processability and Flexibility Can be easily cut with scissors or a cutter. The hardness of the sheet can be controlled, making it possible to meet needs such as punching and winding properties. - For detailed technical data, please refer to the additional information provided. - Sheet thickness: 1–20 mm - Sheet width: 630 mm to 1,260 mm * For details on other thicknesses, widths, or lengths, please feel free to contact us. * As this product contains an organic binder, smoke or gas may be generated during the initial heating process.

• Heating device
• Ceramics
• Heat exchanger

Riken NPR Corporation will be exhibiting at the 31st Mechanical Components Technology Exhibition held at Tokyo Big Sight. We plan to showcase three items: "motors," "actuators," and "wave gear reducers," along with "surface treatment technology." ■ Riken NPR Corporation ■ East Exhibition Hall E6-55 We sincerely look forward to your visit to our booth.

Explaining Practical Know-How to Improve the Accuracy of PFAS Analysis In this webinar, we will clearly introduce practical points that make a difference in the field of PFAS analysis, incorporating specific challenges and countermeasures. Additionally, we will answer as many questions as possible that were submitted during pre-registration, sharing insights that contribute to improving analytical accuracy. <Recommended for the following individuals> ✅ Those who are about to start PFAS analysis ✅ Those who are troubled by not knowing the causes of analytical issues ✅ Those aiming for more accurate and efficient analysis ✅ Those who want to gain the latest information and practical knowledge about PFAS analysis https://register.gotowebinar.com/#register/1088563146654203739?source=iPROS

We plan to showcase a demo system incorporating our products. We look forward to welcoming many of you.

Nihon Computer Development Co., Ltd. will exhibit at the "38th Monozukuri World Tokyo." We sincerely look forward to your visit.

Central Automotive Industry Co., Ltd. will be exhibiting at "SPORTEC 2026" held at Tokyo Big Sight. We plan to showcase "C.A.W Antibacterial Deodorizing Titania," which decomposes bacteria and viruses attached to surfaces, and alkaline ionized water "CPC ALE." At our booth, we will demonstrate the deodorizing and antibacterial effects of C.A.W Antibacterial Deodorizing Titania and display the effects of CPC ALE.