Hakkou Hose Piping Webinar [Days with 8]

Outstanding transparency and flexibility that you wouldn't expect from a fluorine hose. A super hose made of tetrafluoroethylene that withstands most chemicals!

Outstanding transparency and flexibility that you wouldn't expect from a fluorine hose. A super hose made of tetrafluoroethylene that withstands most chemicals! Super flexible fluorine hose (reinforced type) [E-SJB] - all non-PVC! Improved pressure resistance with reinforced threads!

• Piping Materials

An improved version of the super flexible fluorine tube. The ultra-flexible fluorine tube that responds to the demand for "a softer fluorine tube"!

"E-SJUS" is an improved version of the super flexible fluorine tube, designed to respond to the demand for "softer fluorine tubes." ● Super flexibility… Its laminated structure offers superior flexibility compared to commercially available single-layer fluorine tubes and our conventional super flexible fluorine tube (E-SJ), enhancing workability. ● Chemical resistance… The inner layer is made of tetrafluoroethylene-based fluororesin (ETFE), providing resistance to most chemicals. ● Resistance to bending… Compared to commercially available single-layer fluorine tubes, it is less prone to bending and can partially recover even if bent. ● Non-stick properties… The fluororesin in the inner layer has excellent water-repellent and non-stick properties, resulting in minimal fluid residue and superior cleanability (it also has good slip). ● Abrasion resistance… The fluororesin in the inner layer has excellent abrasion resistance and can withstand slurry-like chemicals. ● Phthalate-free… It uses a non-oil material that contains no phthalates, which can be a source of leachables. ● Non-PVC… It is made from non-PVC materials. ● Low leachables and low odor… Due to the extremely low resin odor and leachables, it is suitable for food, beverage, and cosmetic applications.

• tube

Industry first! The electrical resistance value of the hose complies with international guidelines! It can safely discharge static electricity associated with the transfer of flammable liquids, regardless of the length of use.

● Conductivity… A hybrid system of conductive resin and stainless steel wire achieves stable electrical resistance values (conductivity: dissipative grade) regardless of hose length. *Dissipative refers to a grade of electrical resistance suitable for static electricity discharge, falling within the standard of 1KΩ≦R＜1MΩ among conductive materials. ● Compliance with guidelines… The electrical resistance value of the hose complies with ISO 8031 and IEC/TS 60079-32-1:2013 (Guidelines for explosive atmospheres Part 32-1: Static electricity hazards). ● Chemical resistance… The inner layer is made of tetrafluoroethylene resin (ETFE), which is resistant to most chemicals. ● Non-stick properties… The fluororesin of the inner layer has excellent water repellency and non-stick properties, resulting in minimal fluid residue and superior cleanability. ● Vacuum compatibility… It can be used for both pump suction (negative pressure) and pressure delivery, with excellent bending retention. ● Phthalate-free… It uses a non-oil material that does not contain phthalates, which can cause leachables.

• hose

Hakkou Ferrule Fitting Fastening Product / Minimal liquid accumulation inside the nipple, contributing to reduced cleaning time.

1. Safety and Security The flexible fluorine hose series designed by hose manufacturer Hakkou is equipped with specially designed ferrule fittings that are mechanically tightened. Every unit undergoes pressure and leak testing before shipment. As these are manufacturer-assembled products, there is no fluid leakage or fitting disconnection, ensuring safety and security. The ferrule fittings allow for easy piping work, enhancing work efficiency and standardization. 2. Hygienic Fittings with Minimal Liquid Trapping By adopting a nipple shape that minimizes liquid trapping, hygienic fluid transport is made possible. Additionally, the liquid-contacting parts of the fittings are lined with PFA, which offers excellent chemical resistance similar to the fluororesin (PVDF and ETFE) on the inner surface of the hose, making it suitable for a wide range of applications and fluids. 3. The hose is highly transparent, with excellent chemical resistance, hygiene, and cleanability! The flexible fluorine hose series is highly transparent, allowing for easy visibility of the fluid, providing peace of mind. The inner layer of the hose is made of fluororesin, offering superior chemical resistance and compatibility with most chemicals (refer to chemical resistance data). Furthermore, the inner layer of fluororesin has water-repellent and non-stick properties, making it difficult for fluids to remain and facilitating easy cleaning. It complies with the Food Sanitation Act and standards for food and additives (Ministry of Health and Welfare Notification No. 370 of 1959).

• hose

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube