Notice of the "FOOMA JAPAN 2026" Exhibition

Automating and streamlining the work of attaching and detaching pipes! [Case study collection available]

Our company designs and manufactures "Auto Connectors (automatic attachment and detachment devices)," "Auto Couplers," and "automatic piping switching devices" to automate the attachment and detachment of piping and electrical wiring for liquids, slurries, and powders. We contribute to the automation of factories, increased productivity, and improved safety for workers. Regardless of whether it is fluids or powders, we offer custom design and manufacturing from individual couplers to entire systems based on customer requirements. ■ Case Study Collection Available We provide a "case study collection" summarizing examples from the following industries: chemicals, pharmaceuticals, daily necessities, food, beverages, automotive, industrial machinery, and steelmaking. ■ New Product Launch (Patent Pending) A new case for "Quitto," which will be launched at the end of 2024, has been added. This groundbreaking new product can shorten the attachment and detachment time of the helical clamp to just a few seconds. It can be done easily by anyone with one hand. The risk of dropping the gasket during connection is also minimized. We encourage you to try it out. *For more details, please refer to the PDF materials or feel free to contact us. *Demo units and cut models of the products are also available.

• Other Connectors

Reduce the filling machine's Heller clamp attachment and detachment work to 4 seconds! Moreover, with one hand.

We have introduced an automatic filling machine in a factory that handles OEM for cosmetics. Previously, when cleaning hoses, the process involved attaching and detaching with a heel clamp, which particularly for those who are not skilled, posed several issues: - It took a long time to attach and detach. - It was not securely clamped, leading to leaks. - Gaskets were dropped on the floor during installation. - There were risks of cuts and other injuries. These tasks were cumbersome and the fear of injury sometimes led to part-time workers leaving their jobs. Since this factory is located in a rural area, they also struggled to hire replacement staff. The new product, Quitto, allows anyone to easily attach and detach with one hand! *This new product was co-developed with PACRAFT and is currently under patent and trademark application. With its unique structure, it presses a large gasket while being installed, completing the attachment and detachment process in just a few seconds. Additionally, since the gasket is securely fixed to the piping, the risk of dropping the gasket on the floor during installation is almost eliminated. By using it in existing heel clamp connection points, especially in areas with frequent attachment and detachment (such as the end of hoses), it contributes to increased productivity and safety.

• Pipe Fittings

The connection work of the Heller joint is now "4 seconds with one hand"!

Quitto has been adopted at a food manufacturing factory. The hose connection between the tank and the filling machine required the removal and attachment of the hose clamp every time the filling material was changed in order to clean the hose. Traditionally, this removal and attachment process of the hose clamp took about 20 seconds to 1 minute. Additionally, when reattaching it to the piping after cleaning, there were instances where the gasket would fall to the floor, necessitating another cleaning, leading to time loss during setup changes and piping cleaning. Our Quitto can be easily attached and detached with one hand by anyone. Its unique structure allows for the attachment of a large gasket while pressing it in place, completing the attachment and detachment process in just a few seconds. Since the gasket is securely fixed to the piping, the risk of dropping it on the floor during attachment is almost eliminated. By using it at existing hose clamp connection points where frequent attachment and detachment occur (such as at the end of hoses), it contributes to increased productivity and safety. We also have demo units available, so please feel free to reach out if you're interested. This product is a new development in collaboration with PACRAFT, a packaging machine manufacturer (part of the same Nabtesco group as us). *Patent, trademark, and design applications have been filed.

• Pipe Fittings

You can easily and safely perform the Heller clamp connection work with one hand.

This is a new product developed in collaboration with PACRAFT (part of the same Nabtesco Group as our company). *Patent and trademark applications have been filed. Traditionally, the process of attaching and detaching the Heller clamp took about 20 seconds to 1 minute. Additionally, when attaching it to the piping after cleaning, there were instances where the gasket would fall to the floor, necessitating re-cleaning, leading to time loss during setup changes and piping cleaning. Our Quitto allows anyone to easily attach and detach with one hand. With its unique structure, it presses a large gasket while being attached, completing the process in just a few seconds. The gasket is securely fixed to the piping, significantly reducing the risk of dropping it on the floor during attachment. By using it in existing Heller clamp connection points where frequent attachment and detachment occurs (such as at the end of hoses), it contributes to increased productivity and safety. We also have demo units available, so please feel free to reach out if you're interested.

• Piping Materials

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.