A new lineup has arrived at Quitto: "EPDM Packing."

Reduce the filling machine's Heller clamp attachment and detachment work to 4 seconds! Moreover, with one hand.

We have introduced an automatic filling machine in a factory that handles OEM for cosmetics. Previously, when cleaning hoses, the process involved attaching and detaching with a heel clamp, which particularly for those who are not skilled, posed several issues: - It took a long time to attach and detach. - It was not securely clamped, leading to leaks. - Gaskets were dropped on the floor during installation. - There were risks of cuts and other injuries. These tasks were cumbersome and the fear of injury sometimes led to part-time workers leaving their jobs. Since this factory is located in a rural area, they also struggled to hire replacement staff. The new product, Quitto, allows anyone to easily attach and detach with one hand! *This new product was co-developed with PACRAFT and is currently under patent and trademark application. With its unique structure, it presses a large gasket while being installed, completing the attachment and detachment process in just a few seconds. Additionally, since the gasket is securely fixed to the piping, the risk of dropping the gasket on the floor during installation is almost eliminated. By using it in existing heel clamp connection points, especially in areas with frequent attachment and detachment (such as the end of hoses), it contributes to increased productivity and safety.

• Pipe Fittings

The connection work of the Heller joint is now "4 seconds with one hand"!

Quitto has been adopted at a food manufacturing factory. The hose connection between the tank and the filling machine required the removal and attachment of the hose clamp every time the filling material was changed in order to clean the hose. Traditionally, this removal and attachment process of the hose clamp took about 20 seconds to 1 minute. Additionally, when reattaching it to the piping after cleaning, there were instances where the gasket would fall to the floor, necessitating another cleaning, leading to time loss during setup changes and piping cleaning. Our Quitto can be easily attached and detached with one hand by anyone. Its unique structure allows for the attachment of a large gasket while pressing it in place, completing the attachment and detachment process in just a few seconds. Since the gasket is securely fixed to the piping, the risk of dropping it on the floor during attachment is almost eliminated. By using it at existing hose clamp connection points where frequent attachment and detachment occur (such as at the end of hoses), it contributes to increased productivity and safety. We also have demo units available, so please feel free to reach out if you're interested. This product is a new development in collaboration with PACRAFT, a packaging machine manufacturer (part of the same Nabtesco group as us). *Patent, trademark, and design applications have been filed.

• Pipe Fittings

You can easily and safely perform the Heller clamp connection work with one hand.

This is a new product developed in collaboration with PACRAFT (part of the same Nabtesco Group as our company). *Patent and trademark applications have been filed. Traditionally, the process of attaching and detaching the Heller clamp took about 20 seconds to 1 minute. Additionally, when attaching it to the piping after cleaning, there were instances where the gasket would fall to the floor, necessitating re-cleaning, leading to time loss during setup changes and piping cleaning. Our Quitto allows anyone to easily attach and detach with one hand. With its unique structure, it presses a large gasket while being attached, completing the process in just a few seconds. The gasket is securely fixed to the piping, significantly reducing the risk of dropping it on the floor during attachment. By using it in existing Heller clamp connection points where frequent attachment and detachment occurs (such as at the end of hoses), it contributes to increased productivity and safety. We also have demo units available, so please feel free to reach out if you're interested.

• Piping Materials

● What is a pneumatic regulator? It is a self-developed pneumatic regulator with a control reproducibility of ±0.1%. We offer a wide range of products from low flow to high flow. ● What is a regulator? Please use it to adjust the test pressure for leak testing. By supplying a stable test pressure, it enables more accurate measurements.

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In a civil engineering site material yard, not only is material storage conducted, but also the frequent movement of trucks and heavy machinery, unloading, and the movement of workers. On unpaved ground, mud and ruts can occur due to rain, which may reduce work efficiency. Hyper CLT mats are civil engineering CLT materials that utilize wood CLT. By laying them in material yards or storage areas, a work space that facilitates the movement of vehicles and heavy machinery can be established while protecting the ground. They can be laid only in necessary locations, and relocation or repurposing in accordance with construction progress is also possible. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery. After use, they can also be utilized as temporary roads, access routes, or heavy machinery work yards. Additionally, they offer unique benefits of wood, such as glare reduction, noise suppression, and CO2 fixation. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," these wooden mats can also be used for environmental improvement in material yards and innovative public works.

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 24GB ● Onboard UFS storage: up to 256GB ● 2.5GbE (2.5 Gigabit Ethernet): 1 port ● HDMI 2.1 (TMDS): 1 port ● USB 3.2 Type-A: 3 ports ● 10-pin GPIO: 1 port ● Power input: 12V DC * This model does not include an operating system.