[Media Information] Announcement of Publication in Packaging Times

High-pressure hot air shrink! Temperature management is possible with the digital screen of the heater, making it easy to set temperatures for various types of shrink with high reproducibility.

The shrink packaging machine "EZ-PACK" is equipped as standard with Leister's hot air heater and digital screen temperature control model, enabling precise and easy beautiful shrink wrapping. Since temperature management can be done with digital numbers, it allows for shrink wrapping at the same temperature consistently. It accommodates a wide variety of containers and various materials of shrink film with flexible hot air. 【Features】 - Easy temperature setting for a variety of shrink types with high reproducibility - Minimal thermal impact on contents and containers due to instant heating - Maximum power consumption reduced by 36% compared to conventional models, achieving significant energy savings - Quick startup and shutdown within approximately 5 minutes - Lightweight design with an aluminum frame for easy mobility Starting with the "LEP-IV type (4-direction blowing)" that applies high-pressure hot air from four directions to achieve a beautiful finish without wrinkles or unevenness, we also offer the "LEP-II LR type (2-direction blowing left and right)" and the "LEP-II UD type (2-direction blowing up and down)." We have a proven track record in a wide range of industries including cosmetics, pharmaceuticals, and miscellaneous goods. For more details, please refer to the PDF materials or feel free to contact us.

• Shrink Wrapping Machine
• Other packaging machines

Before printing on wet or frozen items! All models come standard with digital temperature control hot air machines, compatible with both 100V and 200V.

"EZ-DRY" is a device suitable for drying wet tofu and frozen products before printing, as well as for removing frost. The heater section is equipped with a high-durability, high-output Leister hot air blower, allowing for digital temperature control. It removes moisture and defrosts instantly with high-pressure hot air. Since it provides instant drying before printing, it has minimal impact on the product's exterior and contents. There are also models compatible with 100V voltage. 【Features】 ■ Instantly removes moisture and defrosts with high-pressure hot air ■ Minimal impact on the product's exterior and contents due to instant drying before printing ■ Compact design that saves space ■ Easy to move with a caster-equipped stand ■ Start-up and shutdown can be completed in about 5 minutes ■ Individual sales of hot air blowers, fans, nozzles, etc., are also available *For more details, please refer to the PDF document or feel free to contact us.

• Food Packaging Machinery
• Other markings
• Drying Equipment

Easily shrink caps at low cost and in a space-saving manner with hot air! Also equipped with an external control interface.

The "EZ-CAP SEAL" is a cap shrink device that can select and adopt a digital temperature control model. It is compact, equipped with casters for easy movement, and can shrink immediately. With a maximum airflow of 900L/min, it minimizes shrinkage unevenness and also allows for airflow adjustment. Furthermore, it heats only the cap area with hot air, making it simple and economical. The thermal impact on the contents is minimized compared to using tunnels or ovens. 【Features】 - The stand frame is made of aluminum and comes with casters for easy mobility. - The heater (hot air machine) is equipped with an auto cool-down function as standard. - Start-up and shutdown take place within approximately 5 minutes. - Individual sales of hot air machines, nozzles, etc., are also available. - A low-cost analog temperature control type hot air generator is also available. We have a demonstration unit prepared at our showroom in Shin-Yokohama and Esaka. If you provide us with sample shrink film and bottles, we can conduct a shrink test. We will select the optimal nozzle based on your cap shape. Please feel free to contact us.

• Shrink Wrapping Machine

Hot air is ideal for shrink film and hoses! It is also commonly used for packaging.

We would like to introduce a case of "Film Shrink" using the hot air technology of Reister Technologies, Inc. Starting with tube-shaped shrink films used in the food and beverage industry, it is possible to package products and apply shrink wrapping. Additionally, it is also possible to protect vehicles temporarily with shrink film for winterization measures for motorboats and yachts, as well as various types of vehicles. 【Implementation Effects (Partial)】 ■ Shrinkage of packaging film - Serves as a cover for bottles and extends the overall height - Protects from dirt while also serving decorative purposes ■ Product packaging and shrink wrapping - Cost-effective and easy to recycle - Can protect against changes in weather, dirt, and damage *For more details, please download the PDF or feel free to contact us.

• Hot air generator

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The 【 HDA-0100 series 】 currently available from Fukuda Corporation is a "Portable Hydrogen Leak Detector." ■ Compact and lightweight, convenient for carrying (approximately 400 g, including battery) ■ Battery-operated and cordless (continuous usage time of approximately 8 hours) ■ High sensitivity and wide range (0.5 ppm to 5000 ppm) hydrogen measurement is possible in a handy type It has features such as these. "What is a Hydrogen Leak Detector?" It is a tester that can measure leaks in small areas that could not be measured in air leak tests and can also identify leak points. It uses a tracer gas consisting of 5% hydrogen and 95% nitrogen, an industrial mixed gas (non-flammable gas: ISO10156:2017). For more details, please refer to the links below for related links, product information, and catalogs.

The HDZ-0201 is a hydrogen leak detector designed for installation in equipment. It is used to measure the overall leakage from the entire inspected item (workpiece). - The atmospheric pressure chamber method involves covering the workpiece with a chamber, filling the inside of the workpiece with tracer gas, allowing the leaked gas to accumulate in the chamber, stirring the leaked gas, and forcing circulation to measure the gas concentration with a hydrogen detector. - The vacuum chamber method allows for high-sensitivity measurements by evacuating the chamber and then introducing atmospheric air into the chamber, directing the gas to the hydrogen detector. There are two methods available. It features a compact and lightweight design that is easy to integrate into equipment. Additionally, its concentration resolution capability is ultra-high sensitivity up to 0.1 ppm (depending on set conditions and environmental conditions). Detection principle: Semiconductor type Detection sensitivity: Equivalent to 1×10⁻⁶ Pa·m³/s (depending on inspection conditions and measurement environment) Usage: Equipment-integrated type (dedicated for installation in equipment) Resolution: 0.1 ppm Power supply voltage: DC 24 V External dimensions: W 93 × D 91 × H 97 mm