We will be exhibiting at TECHNO×FRONTIER 2026 (Resin Processing Division/New Business Development Office).

Thinner than conventional EMC and noise control sheets! Lighter than ever! Stronger than ever!

Due to the recent advancements in DX and IoT, the need for measures against electromagnetic noise generated by electrical and electronic devices has been increasing. We must keep an eye on various issues, including not only device malfunctions but also communication disruptions, health problems, and Tempest countermeasures. In response to requests for easy shielding solutions, wrapping around cables, and lighter sheets, we have developed EMC and noise countermeasure films and sheets. Leveraging our long-established surface treatment technology for resin components, we have created films and sheets with a special coating applied to ultra-thin resin films. They are lightweight, easy to handle, and can be easily applied or wrapped for use. 【Line UP】 YS-FC / YS-FP: Film type (YS-F series) YS-SC / YS-SP: Sheet type (YS-S series) 【Features】 ◆ Ultra-thin film/sheet with a minimum thickness of 40 microns ◆ Super lightweight at just 7.3 mg for a 1 cm x 1 cm piece ◆ This thinness allows for 99.99% (80 dB) electromagnetic noise shielding

• Plating Equipment
• Other metal materials

Significantly improved shielding performance! Coating can be applied to various shapes that cannot be handled by metal foils or sealing materials, achieving weight reduction by switching the base material of the components.

In recent years, with the increase in electronic devices around us, the sources of electromagnetic noise have also increased proportionally. Since electromagnetic noise poses a risk of causing malfunctions in peripheral devices, the necessity for EMC measures such as "not emitting electromagnetic noise" and "not being affected by noise" has become more significant. In response, traditional measures using metal foils, seals, and sheet types have faced challenges regarding weight, workability, and electromagnetic wave shielding effectiveness. Yuken Industrial has leveraged its long-developed surface treatment technology for "plastic components" to address these challenges. 【Features】 - Significantly improved shielding effectiveness compared to metal foil and seal types - Capable of coating various shapes that cannot be addressed by metal foils, seals, or sheet materials - Lightweight due to switching from metal substrates - Blocks electromagnetic waves over a wide range of 80db or more *We are always accepting test processing requests. For more details, please download the PDF or feel free to contact us.

• Plating Equipment

Plating with processing achievements spanning half a century.

Resin plating processing can be applied to a wide range of industrial products. We cater to the needs of various industries, including automotive parts, housing equipment, gaming consoles, and electronic components. In addition to decoration, it also offers the potential for weight reduction by switching from metal components.

• Processing Contract

We have advanced analyzers and testing equipment! We guarantee a satisfactory response to any potential issues.

Resin plating processing can be applied to products in various industries. Our half-century of product processing achievements at Yuken Industry proves this. We consistently produce products that meet the demands of users in various sectors and industries, including automotive parts, faucet-related components, housing equipment, gaming consoles, and electronic components. 【Features】 ■ Improved corrosion resistance - Supplying interior and exterior parts to domestic car manufacturers, clearing all stringent specifications. ■ Quality control system - Equipped with advanced analyzers and testing machines, we guarantee satisfactory responses to any potential issues. ■ Enhanced chrome finish *For more details, please refer to the related links or feel free to contact us.

• Processing Contract

The Abrasive Technology Association is a society that comprehensively addresses technologies related to precision processing, including abrasive technology, tool technology, processing technology, processing machinery, measurement technology, and micro/nano processing technology. We will be giving a presentation titled "Enhancing Business Productivity through Tool Information Management" at the 2nd Research and Study Meeting of the Kansai Regional Chapter. We will also introduce the initiatives of Matsue Yamamoto Metal Co., Ltd., a WinTool user, at this event. If you are available on July 16, 2026, please consider participating.

A must-see for those considering the introduction of 3D printers! If you want to hear about practical examples, please take a look. ------ In recent years, 3D printers have been increasingly utilized in various fields such as prototype development, jig manufacturing, and small-lot production. However, many may have questions such as, "How does the printing process work?", "How can we utilize it in our company?", and "Which model should we choose?" This seminar will clearly introduce the basics of 3D printers as well as actual case studies. It is recommended not only for those who are considering the introduction of 3D printers but also for those who are already using them and want to expand their applications. ----- ◆ Recommended for: - Those considering the introduction of a 3D printer - Those who want to know the basic mechanisms of 3D printers - Those looking to improve efficiency in prototyping or jig manufacturing - Those who want to reference case studies from other companies - Those searching for a suitable 3D printer for their company Even if you cannot watch it in real-time, you can view the recorded session for one week after the event. We sincerely look forward to your participation! *This seminar will be held in an online format using Zoom.

The particle visualization technology developed under our brand "ViEST" has a very high level of detection sensitivity, capable of visualizing the suspended or adhered states of micro and nano-sized particles in real time. We are engaged in the sale of visualization systems and contract services for evaluation (investigating particles and airflow in production processes, inside and outside manufacturing equipment, evaluating the performance of cleaning products, proposing yield improvement measures, etc.) both domestically and internationally. In manufacturing environments, invisible fine foreign substances, dust generation, particle adhesion due to static electricity, and airflow disturbances can cause quality defects and reduced yield. Our company clarifies these contamination factors through visualization technology and provides consistent support from identifying the source of the problem to considering and confirming improvement measures. Do you have any of the following concerns? - Unable to identify the cause of foreign matter contamination - Want to check airflow and cleanliness in clean rooms - Want to understand dust generation from manufacturing equipment and transport systems - Want to reduce particle adhesion to films and substrates - Want to improve contamination that leads to reduced yield

[Lecturers] KPMG Consulting Co., Ltd. Executive Officer, Partner Kazushige Ikeda KPMG Consulting Co., Ltd. Technology Consulting Senior Consultant Kakeru Ota [Key Lecture Content] In recent years, AI has evolved beyond information processing in digital spaces, such as text generation and image recognition, to become Physical AI that perceives, judges, and acts in the real world by connecting with sensors, robots, vehicles, industrial equipment, and more. Physical AI is increasingly important across a wide range of fields, including manufacturing, as it addresses industrial challenges such as labor shortages, skill transfer, replacement of hazardous work, and productivity improvement. Additionally, foundational models, semiconductors, sensors, actuators, and robotics-related technologies that support Physical AI are becoming increasingly significant from the perspective of economic security, particularly in terms of responding to supply chain risks and securing and managing critical technologies. This lecture will organize the basic concepts and key technologies of Physical AI, discuss its potential applications in manufacturing and industrial sectors, outline practical considerations for implementation and operation, and explain the actions that companies should take moving forward.

[Instructor] Nobuyuki Oonaka, CEO of Bridge Inc., Project Designer [Key Lecture Content] "Why do new businesses often come to a halt?" The cause may not be a lack of ideas or talent. Through supporting over 300 new businesses and business developments, I have learned that what separates success from failure is "the structure of the organization"—specifically, how decisions are made, how dialogue occurs, and how assumptions are shared. In this seminar, based on the book "How to Create Self-Driving New Businesses" (Shoei-sha), we will analyze the "communication problems" that cause new businesses to stop as a structure. The goal is to develop a common language within the organization to identify "where we are stuck and what actions we should take." I will share how to use the "self-driving map" in practical terms.