I have added 'A Comprehensive Explanation of Near-Infrared in 5 Minutes!' to the technology trend keywords.

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only transmit specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can you create a film for that? - Since light other than the desired wavelength will cause noise, I would like to widen the stop band. - Given the range of incident angles, can this be taken into account? - Is it possible to mount this on AGVs or OHTs? The 905nm bandpass filter is a filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our proven results in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (such as TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Distance measuring device
• Image Processing Equipment
• Sensors

This is a mirror that reflects near-infrared light, which causes heat. It has a proven track record in projectors and lighting devices where temperature rise is a concern.

1) Are you facing such issues? ■ I want to prevent the temperature from rising due to near-infrared light emitted from the light source. ■ Projectors and lighting devices are getting too hot. ■ Is it possible to transmit visible light while reflecting near-infrared (NIR)? ■ Can the wavelength range of the mirror be customized? 2) What is a hot mirror? A hot mirror is used in projectors and lighting devices where temperature rise due to infrared radiation is a concern. By using a hot mirror, it is possible to suppress temperature rise and enable bright light source design. As for the coating, it has a special coating that transmits visible light and reflects more than 95% of near-infrared light (NIR). It is used in lighting equipment that employs halogen or xenon light sources, as well as in light source reflection mirrors for medical devices.

• LED Module
• mirror
• Sensors

It is a filter designed to transmit light in two specific wavelength bands while blocking (preventing) other wavelength bands. It is ideal for surveillance cameras and similar applications.

1) Are you facing issues like this? ■ I want to pass visible light and part of the infrared wavelength (850nm), is that possible? ■ I definitely want to cut out the blocking range that causes noise. ■ Since there is a range of incident angles, can that be taken into account? ■ The shape is special, but can it be shipped as a part? 2) Dual-band pass filter (multi-band pass filter) This is a filter designed to transmit light in two specific wavelength bands while blocking (stopping) other wavelength bands. In addition to regular IR cut, it has the function to selectively transmit only specific near-infrared wavelengths (such as 850nm, 905nm, 940nm, 1064nm). For example, it is ideal for applications that require monitoring during both day and night by transmitting specific visible light and specific near-infrared light. With 40 years of experience, we have achieved sharp wavelength separation and high transmission rates. Our unique control technology during film formation allows for high durability and reduced shift.

• Other optical parts
• Surveillance Cameras
• Sensors

This is an infrared wavelength filter optimized for optics, with plasma control technology enhanced to its limits.

Infrared materials are incredibly fragile! (Weak against scratches, weak against water, weak against chemicals) This common knowledge can be overturned with our company's technology. 1) Excellent infrared transmission properties This is a filter that transmits infrared light through the formation of a multilayer film, utilizing interference effects to achieve excellent transmission rates from near-infrared to far-infrared regions. 2) Design and customization available for desired wavelength ranges We can design and deposit films tailored to the wavelength ranges requested by our customers. Please inform us of the substrate type and wavelength range when making inquiries, as we will design according to the characteristics of the substrate. 3) Measurement equipment: FT-IR available Rest assured that we will always include a measurement chart (spectral characteristics) upon shipment. 4) Component support available We can not only handle substrate procurement and film deposition but also cut to any desired shape and ship as components. However, we will need detailed drawings. 5) Cleanroom compliance Our work environment maintains the necessary cleanliness levels from film deposition to inspection, ensuring a cleanroom operation. We have a robust system in place to address minute film defects (such as foreign particles in the film).

• Plastic processing machines (cutting and rolling)
• Transport and handling robots
• Surveillance Cameras

The applications of Hyper CLT sheets are not limited to specific locations. Essentially, many civil engineering sites that have previously used steel plates are candidates for consideration. Wood CLT can be utilized in various places such as temporary roads, access routes, heavy machinery work yards, material yards, storage areas, temporary parking lots, and worker pathways. Of course, there are cases where steel plates are more suitable depending on site conditions, such as in areas with heavy loads or where heavy machinery needs to turn. The important thing is not to replace everything, but to use them appropriately according to the ground conditions, machinery, and intended use. Hyper CLT sheets are lightweight, easy to install and remove, and have unique characteristics of wood, such as reducing glare and metallic sounds, and fixing CO2. Furthermore, it is a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A."** By utilizing wood, NETIS, civil engineering, and CLT, it provides a new option for places that have previously used steel plates.

Event Date: October 7 (Wednesday) to October 9 (Friday), 2026 Time: 10:00 AM to 5:00 PM Venue: Intex Osaka Our company will be exhibiting at the 29th Monozukuri World Design and Manufacturing Solutions Exhibition, which will be held at Intex Osaka from October 7 (Wednesday) to October 9 (Friday), 2026. At the venue, we will showcase the upgraded "ReMacs Hybrid," as well as the eagerly awaited production management system for the precast concrete industry, "ReMacs TypePca," which will be unveiled for the first time following its release at the end of May! We will also display various solutions, including the newly equipped "AI Drawing Search System" with OCR functionality! We sincerely look forward to your visit.

In civil engineering sites, it is important to clearly communicate not only safety and workability but also "what kind of initiatives the site is undertaking." Hyper CLT mats are civil engineering mats that utilize wood CLT. They look significantly different from conventional steel plates, so when laid at site entrances, viewing routes, or material yards, they create a strong visual impact. In particular, during inspections by clients, site tours, and public open days for local residents, the use of wood, environmental considerations, and the application of new technologies can be conveyed in a "visible form." Additionally, they are lightweight and easy to install and remove, and they offer practical benefits such as reducing glare and metal noise, as well as CO2 fixation. Hyper CLT mats are registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." They combine wood, NETIS, civil engineering, and CLT, making them a new temporary material that can impressively convey the initiatives of the site.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Piab Group has proudly celebrated its 75th anniversary. We would like to express our heartfelt gratitude to our customers and partners who have supported us over the years. As we reach this milestone of 75 years, we reflect on our journey with appreciation and continue to strive to provide better solutions while staying close to our customers' needs. We look forward to your continued support for Piab.