[Media Information] Announcement of Publication in Packaging Times

High-pressure hot air shrink! Temperature management is possible with the digital screen of the heater, making it easy to set temperatures for various types of shrink with high reproducibility.

The shrink packaging machine "EZ-PACK" is equipped as standard with Leister's hot air heater and digital screen temperature control model, enabling precise and easy beautiful shrink wrapping. Since temperature management can be done with digital numbers, it allows for shrink wrapping at the same temperature consistently. It accommodates a wide variety of containers and various materials of shrink film with flexible hot air. 【Features】 - Easy temperature setting for a variety of shrink types with high reproducibility - Minimal thermal impact on contents and containers due to instant heating - Maximum power consumption reduced by 36% compared to conventional models, achieving significant energy savings - Quick startup and shutdown within approximately 5 minutes - Lightweight design with an aluminum frame for easy mobility Starting with the "LEP-IV type (4-direction blowing)" that applies high-pressure hot air from four directions to achieve a beautiful finish without wrinkles or unevenness, we also offer the "LEP-II LR type (2-direction blowing left and right)" and the "LEP-II UD type (2-direction blowing up and down)." We have a proven track record in a wide range of industries including cosmetics, pharmaceuticals, and miscellaneous goods. For more details, please refer to the PDF materials or feel free to contact us.

• Shrink Wrapping Machine
• Other packaging machines

Easily shrink caps at low cost and in a space-saving manner with hot air! Also equipped with an external control interface.

The "EZ-CAP SEAL" is a cap shrink device that can select and adopt a digital temperature control model. It is compact, equipped with casters for easy movement, and can shrink immediately. With a maximum airflow of 900L/min, it minimizes shrinkage unevenness and also allows for airflow adjustment. Furthermore, it heats only the cap area with hot air, making it simple and economical. The thermal impact on the contents is minimized compared to using tunnels or ovens. 【Features】 - The stand frame is made of aluminum and comes with casters for easy mobility. - The heater (hot air machine) is equipped with an auto cool-down function as standard. - Start-up and shutdown take place within approximately 5 minutes. - Individual sales of hot air machines, nozzles, etc., are also available. - A low-cost analog temperature control type hot air generator is also available. We have a demonstration unit prepared at our showroom in Shin-Yokohama and Esaka. If you provide us with sample shrink film and bottles, we can conduct a shrink test. We will select the optimal nozzle based on your cap shape. Please feel free to contact us.

• Shrink Wrapping Machine

Before printing on wet or frozen items! All models come standard with digital temperature control hot air machines, compatible with both 100V and 200V.

"EZ-DRY" is a device suitable for drying wet tofu and frozen products before printing, as well as for removing frost. The heater section is equipped with a high-durability, high-output Leister hot air blower, allowing for digital temperature control. It removes moisture and defrosts instantly with high-pressure hot air. Since it provides instant drying before printing, it has minimal impact on the product's exterior and contents. There are also models compatible with 100V voltage. 【Features】 ■ Instantly removes moisture and defrosts with high-pressure hot air ■ Minimal impact on the product's exterior and contents due to instant drying before printing ■ Compact design that saves space ■ Easy to move with a caster-equipped stand ■ Start-up and shutdown can be completed in about 5 minutes ■ Individual sales of hot air blowers, fans, nozzles, etc., are also available *For more details, please refer to the PDF document or feel free to contact us.

• Food Packaging Machinery
• Other markings
• Drying Equipment

In civil engineering sites, due to the effects of rain and mud, temporary roads, access routes, and heavy machinery work yards can become slippery. To ensure the safety of vehicles and workers, it is important to choose appropriate mats for the site conditions and to improve the footing environment. Hyper CLT mats are civil engineering CLT materials that utilize laminated timber. They possess surface characteristics unique to wood and can provide a non-slip footing environment that differs from metal steel plates. They can be used in a wide range of civil engineering sites, including temporary roads, vehicle entrances and exits, mud prevention, ground protection, heavy machinery scaffolding, and worker pathways. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which contributes to labor-saving in installation and removal. It should be noted that slipperiness can vary depending on weather, slope, mud or oil adhesion, and installation conditions, so on-site verification and appropriate maintenance management are necessary. This wooden mat is registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A" and can be utilized for safety measures and creative ideas.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.