【9/9-11 | Chiba】BATTERY JAPAN Secondary Battery Exhibition

An easier-to-use standard mixer.

In the battery materials industry, uniform mixing of electrode materials and efficient degassing significantly impact product performance and stability. Particularly when handling fine particles, achieving uniform dispersion and removing air bubbles are critical challenges directly related to the charge and discharge characteristics and lifespan of batteries. Inadequate mixing or degassing can lead to performance variability and premature degradation. Shinki's "Awatori Neritaro Atmospheric Pressure Type ARE-310S" simultaneously achieves stirring and degassing in a short time, supporting the resolution of these challenges. 【Application Scenarios】 - Dispersion and homogenization of electrode materials - Prevention of fine particle agglomeration - Efficiency improvement in manufacturing processes 【Benefits of Implementation】 - Quality enhancement through uniform mixing of materials - Stabilization of product performance through bubble removal - Increased productivity through short processing times

• Mixer/agitator

Improved stirring and defoaming power, IoT-compatible rotation and revolution mixer.

In the battery industry, the uniform mixing and degassing of electrode materials are crucial factors that influence battery performance. If air bubbles remain in the electrode materials, it can lead to a decrease in battery capacity and an increase in internal resistance, potentially compromising product quality. ARE-312 enhances stirring and degassing capabilities, contributing to the improvement of electrode material quality. 【Application Scenarios】 - Mixing of battery electrode materials - Degassing treatment of slurries - Material adjustment in research and development 【Effects of Implementation】 - Improvement in electrode material quality - Stabilization of battery performance - Increased efficiency in research and development

• Mixer/agitator

Self-rotation and revolution type mixer Awatori Neritaro Atmospheric pressure type

- Improved stirring performance through increased orbital speed and optimization of the self-rotation ratio. - Variable rotation speed allows for optimal settings according to material characteristics. - Touch panel integration makes condition setting even easier. - Inherits the high-durability drive unit of the ARE-500, refined in production environments. - Added communication functions contribute to traceability management. - Adapter production enables processing with various containers.

• Other mixing and mixing equipment

Stirring of low to high viscosity materials and sub-micron level degassing. A rotary and orbital vacuum mixer equipped with a touch panel and communication functions.

The rotation and revolution method combined with vacuum degassing functionality allows for simultaneous mixing and defoaming/deairing, enabling the removal of bubbles down to the sub-micron level. Additionally, due to the centrifugal force generated during revolution, there is no spillage of materials during operation. The operation is as simple as setting the container and turning on the switch. 【Features】 ■ Simultaneous processing of mixing, dispersion, and removal of sub-micron level bubbles. ■ The rotation and revolution method combined with vacuum degassing functionality allows for high-precision defoaming without spillage during operation, in a short time. ■ Vacuum settings in units of 0.1 kPa, allowing for processing that takes into account the saturation vapor pressure. ■ Real-time display of progress and operating status on a touch panel. ■ Communication function (RS-232C connection) enables selection of setting conditions and starting/stopping of operation. ■ Sample source code (Python) for using the communication function is included.

• Mixer/agitator
• plastic
• Other polymer materials

Simultaneous processing of material mixing and dispersion, as well as submicron-level bubble removal. A medium-sized vacuum type machine trusted in production sites.

The Awatori Rentaro ARV-501 is a rotary and orbital vacuum mixer that can simultaneously process the stirring and dispersion of materials as well as the removal of submicron-level bubbles. 【Features】 ■ Unique mechanism "Vacuum method inside the cup holder" ■ Inherits the highly durable ARE-500 drive unit refined in production environments ■ Standard equipped with a de-bubbling mode ■ Touch panel makes condition setting even easier ■ Added communication function contributes to traceability management * The maximum load capacity refers to the total mass when materials, containers, adapters, etc., are loaded into the cup holder.

• Mixer/agitator

High efficiency of material charging for small volume syringes.

The self-rotating mixer "Awatori Rentaro" and "Handa Rentaro" can easily and quickly fill syringes with materials that have been stirred, dispersed, and defoamed, without any bubbles. It can fill small capacity syringes of 3, 5, and 10 mL, allowing for the efficient handling of tasks that require small amounts. Its simple structure also makes cleaning after use easy.

• Filling and bottling machines

A grinder that can crush materials from a minimum of 10mg to a maximum of 10g from micron level to 100 nanometers in as little as 2 minutes.

The Crushing Nano Taro NP-100 was developed using a rotational and translational method. It is a nano grinder capable of crushing small amounts of materials down to the 100-nanometer level in a short time. While dry grinding is theoretically difficult for particles smaller than 3 microns, wet grinding allows for nano grinding. 【Features】 ■ By grinding with a zirconia container and zirconia balls, contamination is minimized. ■ The chamber atmosphere can be cooled down to -20°C, allowing for safe grinding by suppressing temperature rise. ■ Materials and grinding media can be easily separated and recovered using a mesh filter after grinding. ■ Uniform dispersion of materials is possible after the separation and recovery of the media. ■ Batch processing improves workability during cleaning.

• Crusher

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.