17th High-Performance Materials WEEK [Tokyo] We will be exhibiting a fine particle visualization system at the 17th High-Performance Film Exhibition. (September 30, 2026 (Wed) - October 2, 2026 (Fri) / Makuhari Messe, Hall 2)

It counts particles in gas in real time while simultaneously performing particle size classification. It is a continuously monitored measurement system that can be customized according to specific purposes and applications.

■Constant Monitoring of Particles Using Light Sheet Method■ When measuring particles in gas using a "sampling method" that involves sucking a portion of the gas into a measuring device, there are challenges with gases that are in high-temperature, high-pressure conditions, or have toxic or corrosive properties, as these gases cannot be drawn into the measuring equipment or can only be sampled for a short time. The Particle Eye CC adopts the "light sheet method," allowing for continuous imaging and simultaneous measurement of all particles passing through the light sheet with a camera, significantly reducing measurement omissions compared to the sampling method. ■Real-Time Quantification through High-Speed Image Processing■ Thanks to our uniquely developed high-speed image processing technology, the visualization of particles can be processed in real-time. Measurement processing of particles is conducted simultaneously with capturing or recording, enabling the graphing of count values and particle numbers by size, as well as visualizing the results of particle size classification. ■Customization of the System is Possible■ For example, it is possible to build a system that continuously monitors gas flowing through pipes non-contact and detects and measures particles in the gas (see "Applications and Examples" below). Experienced technicians specializing in visualization will propose a system based on discussions about your equipment situation and application needs. Please feel free to consult with us.

• Environmental Test Equipment
• Optical Measuring Instruments
• Monochrome camera

In clean rooms and general rooms, airflow can be easily visualized and evaluated with good visibility through simple operation.

(1) Compact Rechargeable Pure Water Mist Generator "plus TRACER" This product generates ultra-fine, room-temperature dry mist using pure water (or distilled water) to visualize the "airflow" and "differential pressure" conditions in factories and clean rooms. Its compact, lightweight, and cordless design allows for airflow visualization in various locations, effectively reaching narrow spaces and inside equipment where access is difficult. Additionally, it can be mounted on a camera tripod for easy fixed installation work at high places. (2) LED Light Source for Visual Observation "D Light Type-P" This is a compact, lightweight, high-output, battery-powered LED light. It uses green light for excellent visibility. In addition to visualizing mist, it can also be used to detect foreign objects or scratches on object surfaces. By combining (1) and (2), even a small amount of mist can sufficiently visualize and evaluate the airflow on-site. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝Free Demo Unit Rental Available Feel free to apply through the "Contact Us" section. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

• Leak Testing Equipment
• Other analyses
• Clean Room

Are you struggling with the contamination or adhesion of tiny foreign particles? Our experienced particle and airflow visualization system can help improve your yield. Please feel free to consult with us!

The particle visualization system has solved numerous issues related to foreign matter contamination and deterioration of cleanliness on manufacturing lines. It contributes to on-site improvements through technology and systems that visualize invisible microscopic foreign substances with high sensitivity, as well as quantitative data on the size and number of foreign matter. ■ We offer a diverse lineup of high-sensitivity systems. Cameras: Models with excellent portability, high-speed shooting compatible models, and high-spec models capable of detecting nanoparticles. Light sources: High-sensitivity, wide-range detection models, and ultra-small head models that can be used within devices. * Software is also included that allows for the acquisition of quantitative data through image processing while recording visualization footage. ■ It can be utilized in various scenes of production and quality control. ■ For more details about the system, please visit our website. Numerous shooting case videos are also available. ⇒ https://www.snk.co.jp/viest/ ■ We can introduce visualization technology in general on the web. Shooting demonstrations are also conducted. ■ You can also entrust the evaluation of the site to our specialized visualization technical staff. We often provide improvement proposals that are well received. ■ If you have any questions, please feel free to contact us through our website.

• Counting Machine
• Other measurement, recording and measuring instruments
• Contract Analysis

[Demo unit available for loan] Suitable as a daily use tool for quality control.

★ Compact Rechargeable Pure Water Mist Generator "plus TRACER" This product creates ultra-fine, room-temperature dry mist using pure water (distilled water) to visualize the "airflow" and "differential pressure" conditions in factories and clean rooms. Its compact, lightweight, and cordless design allows for airflow visualization in various locations, effectively reaching hard-to-access areas such as narrow spaces and inside equipment. ★ D-Light Type-F The popular "D-Light" detection tool has undergone a full model change. It has achieved higher output, compactness, and lower power consumption. The detection capability and portability have been significantly enhanced. Since the contaminants themselves emit light, they can be clearly detected. Additionally, by observing the differences in light color, it is possible to estimate the type of contaminants. This is a new type of surface observation tool. ★ D-Light Type-P This tool is suitable for observing surface conditions, such as detecting scratches or particles on surfaces and checking surface irregularities. It can reduce the effects of glare caused by diffuse reflection on surfaces like metallic automotive paint, allowing for the visibility of foreign objects and other details that were difficult to observe with previous lights.

• LED fluorescent lamp
• Light source/lighting
• Fluid analysis contract

Are you troubled by the contamination or adhesion of foreign substances? Our experienced particle and airflow visualization system will solve your quality issues. Please feel free to consult with us!

The microparticle visualization system has solved numerous foreign matter contamination issues in manufacturing lines and pre-shipment inspections. One of its components, the ultra-high sensitivity camera, has been renewed, further enhancing its sensitivity performance. The accompanying software features proprietary high-speed image processing technology, allowing for immediate acquisition of quantitative data alongside the visualization of microparticles. Additionally, a new post-processing software for video has been included, enabling the extraction of various quantitative data from the footage. ■ We have prepared an ultra-high sensitivity lineup tailored to your needs: STD: A compact model with excellent portability HS: A model compatible with high-speed shooting EX: A high-spec model focused on the detection of nanoparticles ■ It can be used in various quality control scenarios. ■ Numerous example videos are available on our website. Please take a look: ⇒https://www.snk.co.jp/viest/movie.html ■ We are always accepting web introductions and demonstrations of visualization technology in general. ■ For more details, feel free to contact us via catalog download or the link below (our website). ■ We also accept commissioned evaluations by our specialized staff.

• Other environmental analysis equipment
• air conditioning
• Ventilation and Exhaust

Easily utilize an ultra-clean environment. Ready to use, suitable for short-term and long-term projects. Class 1 clean room available for rental.

We offer a cleanroom rental service to support manufacturing and research in a high-quality environment. We have cleanrooms of various sizes and classes available according to your needs, and we can accommodate both short-term and long-term use flexibly. To ensure that even first-time users can use our facilities with confidence, we provide thorough support regarding equipment, safety management, and usage procedures. Our cleanroom rentals are utilized for various applications, including the development and verification of semiconductors, pharmaceuticals, and precision instruments. Our cleanroom rentals are equipped with air conditioning and dust removal systems. We can also assist with the installation of equipment and operational support as needed. We welcome both short-term and long-term use, so please feel free to contact us. ★Recommended Points★ - Cleanrooms available for exclusive use. - Control over overall temperature, humidity, and ventilation. - Additional facilities and technologies can be utilized according to your requests. - No need to wear clean suits. - Specialized staff available for support as needed.

• Other clean room equipment and facilities
• Clean Room
• Pharmaceutical related factory equipment

★Free demo unit and introduction video available★ Handheld mist generator that makes the flow of air visible with pure water fine mist.

This is a mist generator for pure water or purified water. It sprays pure water as a dry mist (with particle sizes of a few micrometers). Unlike liquid nitrogen or steam, it generates mist at room temperature. Weighing approximately 500g, it is lightweight and highly portable. It can also operate cordlessly. By connecting a dedicated cable (5m), remote start and stop operations can be performed. It can be fixed in place by attaching it to a tripod or similar equipment using the bottom screws. ● Free rental of demo units is available. Please try it out. ● For more details, please download the catalog or contact us.

• Thermo-fluid analysis
• Liquid film falling evaporator
• Multi-stage fluidized bed type classifier

★Free rental demo units available★ Visualize airflow with fine mist! An ultra-lightweight mist generator weighing about 500g and a light that makes falling dust and adhering particles visible.

○Handheld Pure Water Mist Generator 'plusTRACER Model01' This product creates ultra-fine mist using pure water (distilled water) to visualize the state of "airflow" and "differential pressure" in factories and clean rooms. Visualize the movement of airflow with fine mist! Weighing approximately 500g, it is ultra-lightweight and cordless. It can be taken anywhere, making it effective in hard-to-reach places such as high locations, narrow spaces, and inside equipment cases. 【Features】 ■ The mist is extremely fine, measuring just a few micrometers, making it usable in areas with precision equipment. ■ Generates mist at room temperature. ■ Can be remotely operated from a distance. ■ Can be fixed in place using a tripod. ○Surface Contaminant Identification Visualization Tool "D-Light" Visually detect and identify the type of falling dust and adhering particles! Ideal for quality control in factories and daily hygiene management in hospitals and welfare facilities! Using ultraviolet LED as the light source, this new visualization tool detects falling dust and adhering particles, allowing for the identification of particle types by observing the differences in fluorescent colors emitted from the particles. It is part of the fine particle visualization brand "ViEST" (trademark registered).

• Laser Components
• Light source/lighting
• Fluid analysis contract

[Web Demo in Progress] Achieve highly sensitive visualization of particles and airflow with our unique visualization system!

This is the high-precision model 'Type-H' of the "Particle Visualization System," which visualizes and records invisible particles in real-time as images using a combination of an ultra-sensitive camera dedicated to particle visualization, a laser light source, and image processing software. Features of 'Parallel Eye H': ■ Directivity By accurately controlling a single laser with the correct waveform, we maximize the "directivity" of the laser light to deliver light to particles that are invisible to the naked eye at a distance. ■ Control of Laser Sheet With the dial operation of the controller, precise remote control of optimal light output, spread, and irradiation angle can be achieved for each scene. ■ Usability By constructing a unique light source system, we have reduced the space required for installation, making it particularly easy to set up and handle in manufacturing environments. [For more details, please download the catalog or feel free to contact us.]

• Analytical Equipment and Devices
• Other environmental analysis equipment
• air conditioning

Improvement of overall airflow in the cleanroom, temperature distribution in the manufacturing area, airflow planning.

As part of our contracted services for environmental assessment and improvement, we offer fluid simulation services for airflow, temperature, particle concentration, gas concentration, and more. □ Improvement of the internal environment of equipment □ Improvement of overall airflow in clean rooms □ Design support for localized clean-up □ Equipment load forecasting for energy conservation In addition to particle contamination, we provide simulation technologies utilizing our expertise for various other purposes.

• Contract Analysis
• Other analyses
• Environmental Analysis

[Demo units available] Floating particles in the space and adhering particles on the surface can be seen with the naked eye!

Through the optimization of the optical system, it has become a light source that reaches far with good linearity, allowing for the visualization of distant suspended particles and surface-attached particles. Additionally, it employs a highly visible green light source, enabling visual observation of particles. Despite being a non-laser light source, it allows for the high-sensitivity visualization of airflow and fine particles, and can be introduced at a relatively low cost. 【Do you have any of these concerns?】 ■ I want to check the airflow conditions in the factory or clean room... ■ I want to identify the source of suspended particles... ■ I want to visualize surface-attached particles... ● Demo units are available for free rental! Please try it out first. ● For more details, please contact us.

• Analytical Equipment and Devices
• Other environmental analysis equipment
• air conditioning

[Web demo in progress] A visualization-specific ultra-high-sensitivity camera equipped with the unique image processing technology "ViEST Engine," capable of visualizing the behavior of fine particles and airflow!

The ultra-high sensitivity particle visualization dedicated camera "Particle Eye(R)" is a digital camera specialized in detecting and quantifying weak scattered light from particles. Equipped with the uniquely developed high-speed image processing technology ViEST(R) engine, it enables high-sensitivity imaging while allowing for quantification simultaneously. While sharing ultra-high sensitivity visualization performance, you can choose from three types of lineups according to your needs: ■ Compact standard model "Particle Eye STD" ■ Model compatible with high-speed shooting "Particle Eye HS" ■ Ultra-high sensitivity model pursuing weak light sensitivity "Particle Eye EX" ■ We will exhibit at a real exhibition ■ You can experience the ultra-high sensitivity performance through demonstrations! 【 For more details, please download the catalog or contact viest@snk.co.jp 】

• Other environmental analysis equipment
• Monochrome camera
• Pinhole detector

★Free demo unit and introduction video available★ Handheld mist generator that makes the flow of air visible with pure water fine mist.

This is a mist generator for pure water or distilled water. It sprays pure water as a dry mist (with particle sizes of a few micrometers). Unlike liquid nitrogen or steam, it generates mist at room temperature. Weighing approximately 500g, it is lightweight and highly portable. It can also operate cordlessly. By connecting a dedicated cable (5m), remote start and stop operations are possible. It can be fixed in place by attaching it to a tripod or similar device using the screws on the bottom. ● Free rental of demo units is available. Please try it out. ● For more details, please download the catalog or contact us.

• HACCP-compliant logistics system
• GMP-compliant logistics system
• Ultrasonic Flow Meter

Evaluation of dust generation from mechanical parts and various materials. Real-time counting of the total amount of generated fine particles and particle size classification. Includes an evaluation report.

The "P-Wind" particle generation evaluation device is a new type of evaluation device developed by applying our particle visualization technology. It not only counts the total amount of particles generated from the test specimen in real-time but also simultaneously performs particle size classification. 【Features】 ■ It is capable of measuring the total amount of generated particles. Measurement and evaluation results are submitted as a report (in accordance with JIS B9926). ■ High-speed sampling technology enables highly responsive measurements. Even for test specimens with time-varying generation amounts, changes can be tracked and measured. ■ A wide range of evaluations is possible, from static products like clean supplies to dynamic products like robots. ■ Videos visualizing the particles along with count data can also be recorded, ensuring evidence of data in real-time footage. ■ The device is installed in an ISO Class 3 cleanroom, allowing measurements in an environment with almost no external influence on the data. ■ Customization of measurement conditions is also accommodated. For more details, please download the catalog or contact the person in charge.

• Testing Equipment and Devices
• Analytical Equipment and Devices
• Contract measurement

Are you troubled by oil mist, fumes, and foreign substances generated during processing? This is a fine particle visualization system that has solved many problems that are not visible to the naked eye.

This is a microparticle visualization system that has solved numerous issues related to oil mist, fumes, and foreign substances generated during processing. One of its components, an ultra-sensitive camera, has been renewed and is now available for sale as "Particle Eye." It features enhanced sensitivity compared to previous models and offers three different options to choose from based on your needs. Additionally, the accompanying software is equipped with proprietary high-speed image processing technology, allowing for real-time acquisition of quantitative data while visualizing detected microparticles. ■ Ultra-sensitive lineup tailored to your needs - Compact model with excellent portability (STD) - High-speed shooting compatible model (HS) - High-spec model focused on detecting nano (nm) particles (EX) ■ It can be used not only in clean rooms but also in general environments. ■ For more details, please feel free to contact us via catalog download or the link below (our company website).

• Other environmental analysis equipment
• High Speed Camera
• Surveillance Cameras

[Demo unit available for loan] It can visualize foreign substances, dirt, and scratches on the surface. It is well-received as a daily use tool for yield management, quality control, cleaning management, and hygiene management!

D-Light is a compact, lightweight, high-output, and low-power consumption LED light source. We offer two types in our lineup: Type-F and Type-P. ■ D-Light Type-F This type allows for clear visual detection of foreign particles and dirt adhering to the surface of objects by making them luminescent. Additionally, the differences in the color of the emitted light can help estimate the type of contaminants. It is a surface observation tool that has never been seen before. ■ D-Light Type-P This type is suitable for observing surface conditions, such as detecting particles and scratches on surfaces and checking for unevenness. It can reduce the glare caused by diffuse reflection on surfaces that are difficult to observe, such as metallic paint surfaces of metals and automobiles, allowing for the visibility of foreign substances. It enables surface observation that was previously considered difficult with conventional lights. It can also be used to observe floating particles and mist. ★ This tool is helpful for improving the efficiency of visual surface inspections. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ 　　　Free rental of demo units is currently available. Please feel free to apply through "Contact Us." 　　We encourage you to try it out! ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

• Other inspection equipment and devices
• Visual Inspection Equipment
• Analytical Equipment and Devices

It excels in high sensitivity detection, quantification, and portability, making it suitable for quality inspection and research and development settings. It contributes to the detection of minute foreign substances and scratches, as well as their quantitative evaluation.

■Brought to the site for on-the-spot analysis■ - The D-Scope is a visualization tool specifically designed for surface observation, used in combination with our light sources (such as D-Light and Parallel Eye D). It can detect and visualize particulate or liquid foreign substances and dirt adhering to the surface of objects, as well as tiny scratches. - It is highly portable and does not need to be used in a fixed position like a microscope, allowing it to be brought to the site for on-the-spot analysis. - Since you can decide the shooting location while viewing the camera image and sample it as an image, there is no need to sample the foreign substances or dirt themselves. ■Special high-sensitivity imaging■ - Using a principle similar to that of the D-Light, it can selectively visualize only the self-emitting adhering particles. Additionally, it is possible to identify the types of substances based on the differences in their emission colors.

• Semiconductor inspection/test equipment
• Other Sanitation Inspections
• Other appearance and image inspection equipment

Visualize surface foreign substances, dirt, and scratches! It is well-received as a daily management tool for yield management, quality control, cleaning management, and hygiene management. *Demo units available for loan.

This is a tool that helps improve the efficiency of visual surface inspections. We have prepared two types. ■ D-Light Type-F The popular "D-Light" detection tool for contaminants has undergone a full model change. It has achieved higher output, compactness, lightweight design, and lower power consumption. The detection capability and portability have been further enhanced. Since the contaminants themselves emit light, they can be clearly detected visually. Additionally, by observing the differences in the emitted light colors, it is possible to estimate the types of contaminants. This is a type of surface foreign matter detection tool that has not existed before. ■ D-Light Type-P This tool is suitable for observing surface conditions, such as detecting surface scratches and adhering particles, as well as checking patterns for polishing and decoration. There has been a challenge in observing metallic surfaces, such as those on cars, due to glare caused by diffuse reflection from the surface. This product can reduce the impact of such glare, allowing for the visibility of foreign matter and other elements. It can also be used for observing powder particles and oil mist. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ We have demo units available for loan. Please feel free to apply from our company website. ⇒ https://www.snk.co.jp/viest/

• Semiconductor inspection/test equipment
• Visual Inspection Equipment
• Defect Inspection Equipment

[Web demo in progress] Measurement procedure is a simple 4-step process that allows for PIV (velocity distribution measurement).

This is software that allows for easy PIV (Particle Image Velocimetry) measurements without requiring specialized knowledge. The measurement procedure consists of four steps, improving the efficiency of experiments and field measurements. (1) Loading video files (2) Setting scale, time, measurement area, arrow shape, and color bar (3) Setting the measurement scene range and starting the measurement (4) Displaying the measurement results 【Features】 ■ Supports multiple measurement areas ■ Allows for specifying the range of the measurement scene ■ Measurements can be taken with a simple four-step process This tool enables easy on-site video capture, helping to improve operational efficiency. Combined with our "Visualization System," it enables large-scale measurements. For more details, please contact us or download the catalog.

• Spectroscopic Analysis Equipment
• Other embedded systems (software and hardware)
• Fluid analysis contract

Easily visualize airflow with good visibility.

1) Compact Rechargeable Pure Water Mist Generator "plus TRACER" This product creates ultra-fine, room-temperature dry mist using pure water (distilled water) to visualize the state of "airflow" and "differential pressure" in factories and clean rooms. Its compact, lightweight, and cordless design allows for airflow visualization in various locations, effectively reaching hard-to-access areas such as narrow spaces and inside equipment. Additionally, by attaching it to a tripod head with the screw on the bottom, it can easily be used for fixed installation work at heights. 2) "D-Light Type-P" This is a battery-operated light. The light source emits a green wavelength that is highly visible, achieving a high-output light source that is compact and lightweight while maintaining directivity. It can also be easily attached to a tripod head using the screw on the body for fixed installation tasks. The combination of 1) and 2) enables highly sensitive airflow visualization. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ Currently, demo units are available for free rental. Please feel free to apply through "Contact Us." ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

• Testing Equipment and Devices
• Flow Control
• Fluorescent lamp

Do you want to check if dust collection is effective? Are you struggling with compliance to specialized regulations? Our fine particle visualization technology can solve this!

Since developing a system to visualize fine particles, we have been able to provide this system to a wide range of customers, accumulating over 1,000 achievements to date. Our skilled technical experts can address various scenarios, including improving yield loss due to foreign matter contamination, product development (performance testing, checking for dust presence, measuring particle removal efficiency, etc.), verifying air conditioning airflow, creating promotional videos, and conducting contracted experiments. We also offer support for experiments brought into our proudly maintained clean rooms and super clean rooms for research. [Please feel free to consult us anytime. Our specialized technicians will respond to your inquiries via phone or email.]

• Environmental Test Equipment
• Contract measurement
• Atomic Absorption Spectrometer

Are you troubled by the contamination or adhesion of fine foreign substances? Our experienced particle and airflow visualization system contributes to improving defect rates. Please feel free to consult with us!

The particle visualization system has solved numerous issues related to foreign matter contamination and environmental degradation on manufacturing lines. By visualizing foreign objects that are too small to be seen and obtaining quantitative data such as object size and quantity, it contributes to improvements on-site. ■ We have prepared an ultra-high sensitivity lineup tailored to your needs: - STD: A compact model with excellent portability - HS: A model compatible with high-speed imaging - EX: A high-spec model focused on detecting nanoparticles ■ It can be used in various scenes of production and quality control. ■ Many example videos are available on our website: ⇒ https://www.snk.co.jp/particle/ ■ We are always accepting web introductions and demonstrations of visualization technology in general. ■ You can also commission our specialized staff for on-site evaluations. ■ For more details, please feel free to contact us for catalog downloads or visit our website. ■ Exhibition Information - Experience various systems and tools: We will be exhibiting at the "International Hydrogen and Fuel Cell Expo" held from October 2 to 4, 2024. Please experience it at the venue. Exhibition location: Makuhari Messe, Hall 8, E25-6.

• Food Testing/Analysis/Measuring Equipment
• Flow Meter
• Other environmental analysis equipment

Are you troubled by the contamination or adhesion of fine foreign substances? Our experienced particle and airflow visualization system contributes to improving defect rates. Please feel free to consult with us!

A microparticle visualization system that has solved numerous issues related to foreign matter contamination and environmental degradation on manufacturing lines. By visualizing foreign matter that is too small to be seen and obtaining quantitative data such as the size and number of foreign particles, it contributes to improvements on-site. ■ We have prepared a lineup of ultra-high sensitivity models tailored to your needs: 　　STD: A compact model with excellent portability 　　HS: A model compatible with high-speed imaging 　　EX: A high-spec model focused on detecting nanoparticles ■ It can be used in various scenes of production and quality control. ■ Many example videos are available on our website: 　　⇒https://www.snk.co.jp/viest/movie.html ■ We are always accepting requests for web introductions and demonstrations of visualization technology in general. ■ You can also commission our specialized staff for on-site evaluations. ■ For more details, please feel free to contact us for catalog downloads or inquiries on our website.

• Other environmental analysis equipment
• Thermo-fluid analysis
• Thermal fluid analysis contract

[Demo unit available for loan] A handheld mist generator that allows airflow checks with pure water fine mist. Since it uses pure water mist, it can also be used in clean rooms!

This is a mist generator for pure water or purified water. It sprays pure water as dry mist (with particle sizes of a few micrometers). Unlike liquid nitrogen or steam, it generates mist at room temperature. Weighing approximately 500g, it is lightweight and cordless, making it excellent for portability and usability. For other features, please refer to the catalog or the video below. 【Are you facing any of these issues?】 ■ I want to check the airflow conditions inside the factory or clean room... ■ I want to confirm whether air is flowing in from the adjacent room... ■ I need a portable type that can be used in various locations such as narrow spaces or high places... ● Free rental of demo units is available. Please try it out. ● For more details, please download the PDF or contact us.

• Flow Meter
• Other flow meters
• Fluid analysis contract

[Web Demo in Progress] The mist spray volume can be adjusted in multiple stages. Ideal for wide-area and multi-point airflow visualization!

This product creates a fine dry mist at room temperature using pure water (purified water) to visualize the "airflow" and "differential pressure" conditions within factories and clean rooms. This device allows for airflow visualization suitable for various scenes by utilizing multi-stage spray amounts and a variety of accessories (hoses, pipes with small holes, sockets, etc.). Unlike conventional mist generators, which produce a small amount and take time for extensive airflow visualization, this tool helps improve operational efficiency. 【Features】 ■ Generates ultra-fine (several micrometers) dry mist at room temperature ■ Usable in clean rooms and areas with precision equipment ■ Spray amount can be adjusted in multiple stages to suit the scene ■ Can attach up to three hoses with one unit ■ Allows for approximately three hours of continuous use with a single water refill ■ The main unit can be disassembled for hand washing and drying of the tank interior 【For more details, please download the catalog or feel free to contact us】

• Thermo-fluid analysis
• Fluid analysis contract
• Thermo-fluid analysis software

Comprehensive catalog giveaway! The latest particle measurement equipment to assist with cleaning.

The interest in "cleaning spaces," such as the high demand for "dust-free" environments and air purification in the manufacturing sites of precision machinery, food, and pharmaceuticals, is only increasing. To achieve such clean environments, accurate measurement of particulate matter and airflow in the space is crucial. However, the introduction of large-scale equipment and the complexity of operations have been significant issues. In response, three new products have been released to solve the challenges faced on-site! 1. A handheld mist generator that allows for immediate visibility of air flow using pure water mist. 2. A particle visualization system that integrates a camera and light source for easier operation. 3. A fluid velocity measurement software that visualizes fluid speed and movement simply by loading a video. These three products make it easier and more accurate to manage and understand the space. We are currently offering a "comprehensive catalog" for these products! *For those who wish to receive the catalog, please check via [Download] or [Contact Us].

• Other electronic measuring instruments
• Dust collector
• Other clean room equipment and facilities

[Web Demo in Progress] See the causes of yield deterioration! We visualize and analyze microparticles and airflow from the clean room to the inside of manufacturing equipment!

The ViEST(R) particle visualization system is capable of visualizing and recording invisible particles in real-time. It combines the know-how gained from over 1,000 commissioned evaluation services by specialized technical staff, offering performance and usability that can be utilized in various fields such as film manufacturing, precision metal processing, resin molding, semiconductor manufacturing, and pharmaceutical factories. Additionally, the ultra-sensitive camera "Particle Eye EX," equipped with the high-speed image processing technology "ViEST(R) Engine," has been added to the lineup, enabling even more sensitive visualization evaluation and quantitative analysis. - We offer online technical presentations and also conduct live demonstrations. - We regularly participate in exhibitions where you can experience the systems and tools firsthand. We invite you to visit and experience it for yourself. - For more details, please check our company website. Our website features many visualization case study videos.

• Analytical Equipment and Devices
• Other environmental analysis equipment
• air conditioning

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.